REPAIR AND MAINT OF PLUMBING WORK, SANITARY FITTINGS , ROOF LEAKAGE, SUNKEN FLOORS AND MISC CONNECTED B/R ITEMS FOR JCO/ORS MD ACCN AT PATIALA MIL STN UNDER GE (SOUTH) PATIALA

Amount

Dismantling floor hearth wall tilling incl CM (beading bud not backing), removing serviceable tiles to store & rubbish off the premises, complete all as specified and directed.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 6-8 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Demolition of cement concrete (un-reinforced) in any thickness (below or above ground level) including with debris from site, complete all as specified and directed.

M&L for 15 mm thick rendering in CM (1:3) mixed with water proofing compound @ 0.20 Ltr/bags as in sunken portion, complete all as specified and directed.

Applying three coat of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg/ sqm all as specified

M&L for PCC 1:2:4 type B0 Using 12.5 mm graded stone agg as in as in PCC comping / benching on floor/ wall juction of sunken portion complete all as specified and directed.

PCC 1:7:12 mix, type E2 ( using 40mm graded brick aggregate ) as in filling of sunken portion complete all as specified and directed.

Providing 40mm dia GI pipe medium grade spouts 60cm long including taking down existing pipe complete all as specified and directed.

25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate, as in bedding layer under floor tiles etc complete all as specified and directed.

Taking up or down existing steel tubing and connections, 15mm bore, including cleaning for re use, complete all as specified.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc, including cutting / chasing in wall for concealed tubing, complete all as specified.

Fixing only tubes retrieved from item no 11, with new fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore, complete all as specified and directed.

Taking up or down existing steel tubing and connections, 20mm, including cleaning for re use, bore complete all as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor ctc complete all as specified.

Fixing only tubes retrieved from item no 14, with new fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore, complete all as specified and directed.

S&F in replacement overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing including taking down of existing u/s shower of any description/size complete in all respect all as specified.

S&F in replacement Bib taps, CP, fancy type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F in replacement Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F in replacement Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in replacement Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F in replacement Pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs all as specified.

S&F in replacement vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size all as specified.

S&F in replacement 20mm dia towel rail CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F in replacement 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with wooden beading french polished, etc.complete fixed in position all as specified and directed.

S&F PVC soap holder of suitable size to accommodate soap , tooth brush and tooth paste complete all as directed and specified.

S&F in replacement stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including 32mm waste pipe and making good disturbed portion in CM 1:3 or PCC 1:2:4, including taking down old sink, complete all as directed and specified.

S&F in replacement vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors except G.F.and taking down existing u/s water closet of any description/size complete in all respect all as specified.

S&F in replacement flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F in replacement health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified.

S&F stainless steel grating 150 x 150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

S&F in replacement 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S&F in replacement 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, fixed to wall complete all as specified including fixing of pipe to wall with flat iron clamp of size 25x3mm, bolts washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and as directed.

PVC (SWR) bends/tees of any radius for 110mm bore with access door as in repair complete all as specified.

Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe.

M&L Cast iron multifloor trap 110 mm dia and 600 mm long including jointing with solvent cement in repair complete all as specified and directed.

Cast iron bend duck foot or heelrest, radius for 100mm bore pipe, as in repairs, complete all as specified and directed.

S&F cast iron juction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed.

S&F CI nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed.

M&L for cast iron cowl of 100mm dia complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover with nut & bolts and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

Dismantling of brick tiles or terracing tiles single layers on roofs, including removal from site, complete all as specified.

Demolition of mud phuska on roof any thickness, including removal from site, complete all as directed.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in padding over roof, minimum thickness at khurra as 20mm to maintain a slope of 1:100 , complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

M&L for PCC cement concrete tiles of size 250 x 250 mm and 20 to 25mm thick laid as in roof floor over 15mm thick (1:4) cement bed, set, jointing and pointing with grey cement and pigment complete all as directed

Supply only liquid water proofing compound complete all as specified and directed.

Norton Builders

FAVOURITE ENGINEERS

AR CONSTRUCTIONS

Buttar Construction Co.

m/s panchmukhi builders

M/S Mukesh Kumar Gupta