REPAIRS TO DRAINS BOUNDARY WALLS FENCING GATES PAVEMENTS PATHS AND SEWAGE LINE CLEANING OF SEWAGE LINES SEPTIC TANKS MANHOLES ETC IN CDM UNDER AGE B R N NO II OF GE N SECUNDERABAD

Amount

Site clearance including cleaning away all grass, vegetation, saplings, shrubs, bush-wood, under growth and roots for making the approach to the working area and removing the rubbish to a distance of 50 metres outside the periphery of area complete all as specified and as directed.

Dismantling of (steel, wood, or RCC) posts or struts embedded in ground, any section incl taking out embedded portion and making good disturbed ground complete all as specified and as directed.

All as per item No.2 above, but posts embedded in concrete, brick work, masonary, etc., complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 Cum and getting out in hard/dense soil complete all as specified and as directed.

Demolition of stone/brick masonary built in cement mortar including all quoins, arches, pillars, copings etc., complete all as specified and as directed.

M&L for walling of random rubble masonary Secunderabad type, well bedded, bonded and solidly hearted built in cement mortar (1:4) complete all as specified and as directed.

All as per item No. 6 above, except stone complete all as specified and as directed.

M&L for broken glass coping on top of wall in cement mortar (1:3) complete all as specified and as directed.

S&F mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending spirally for hoping columns hookings ends binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

S&F mild steel TMT 5mm dia and over upto and including 10mm dia in stirrups spaces and binder complete all as specified and as directed.

M&L for providing pre cast RCC type B-1, 1:2:4 (using 20mm graded stone agg) as in posts, struts etc., area exceeding 100 Sqcm and not exceeding 250 Sqcm with or without chamfered angles complete all as specified and as directed. Note: Re-inforcement shall be measured and paid separately under relevant items.

Demolition of plain cement concrete in ground floors/pavings not exceeding 15cm thick below or above ground level, complete all as specified and as directed.

M&L for Cement Concrete (1:3:6) Type C2 (using 40mm graded stone aggregate) as in surface channels and drains, etc., including use and waste of necessary Form Work complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed

M & L for 100 mm thick cement concrete type B1 by using 20mm graded stone aggregate 1:2:4 as in flooring etc., including finished surface smooth and even without using extra cement complete all as specified and as directed.

M & L for 75mm thick cement concrete type B1 by using 40mm graded stone aggregate 1:2:4 as in paths etc., laid in panels including finished surface smooth and even without using extra cement complete all as specified and as directed.

M&L for Cement Concrete (1:2:4) Type B0 (using 12.5mm graded stone aggregate) as in lintels up to 1.5 m clear span, cills, Kerbs, bed plates, Copings, roof Kerbs, etc., rounded or Chamfered angles and throating as directed including use and waste of Formwork as required complete all as specified and as directed.

Removing/dismantling of rusted and unserviceable barbed wire fencing of any size (each line) and any position, complete all as specified and as directed.

S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples and pins etc., complete all as specified and as directed.

All as per item No. 18 above, but fixing only (material obtained from item No.18 shall be reused) complete all as specified and as directed.

Restraining resucuring including making good staples etc., steel barbed wire any dia barbed with barbs spacings, complete all as specified and as directed.

Dismantling of old damaged chain link fencing wire mesh any type and size complete all as specified and as directed.

Fixing only chain link fencing including line wires any mesh size and type to any type of standards and including provn of binding wire complete all as specified and as directed.

Supply only chain link galvanised fencing any type or size, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.

S&F MS work as in fencing post and strurts incl cutting tops to make shape as directed, drilling holes, notching for wire etc., flate iron fillet ( for securing wire mesh etc.,) including all necessary drilling, bolting, riveting etc., and similar work, complete all as specified and as directed.

M&L for MS framed work as in doors and chowkats or gates of angles or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering, doors etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings (exclusive of steel sheeting or other covering) (Fe-410-w Gde-250) complete all as specified and as directed.

S&F framed work such as grills, gratings etc., framed guard bars etc., with end of bars shouldered riveted or angle into spikes framed guard bars and similar work conforming to grade Fe 290-0 Gde -E -165 complete all as specified and as directed.

S&F for structural steel work for rolled sections as in main and cross beams, hips and jack rafters, purlins, running rails and guides for sliding doors, fixed with angle cleats or other connecting plates gde Fe-410-W complete all as specified and as directed.

S&F 0.80 mm thick Mild steel plain black sheet in water troughs, gutters, wall cladding, ducts, etc., cut to size, profiles, edges beaded if reqd, holes punched, including round headed screws, clout nails or rivets and fixed to steel members etc., with plain 40mm lap joints or welded/riveted seams including bending, turning, etc., as required complete all as specified and as directed.

M&L for brick work with flyash bricks (with old size bricks) straight or curved on plan exceeding 6.00m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut in skirting /dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Taking down cement plaster, any description on brick walls or on concrete surfaces including raking out joints, hacking for Key, scrubbing down with water, etc., and removing same from the site(s) complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for Rendering 15mm thick in cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing of new plastered surfaces of walls and applying two coats of cement base paint, over chalk white on plastered surface walls complete all as specified and as directed.

M & L for three coats of white wash on newly plastered surface of walls including preparation of surface complete all as specified and as directed.

Raking out cement mortar joints on Random Rubble masonary wall complete all as specified and as directed.

M&L for providing flush pointing to random rubble masonary in cement mortar (1:4), complete all as specified and as directed.

M&L for raised pointing to random rubble masonry brought upto courses in Cement Mortar (1:4) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc., laid in bedded and pointed in any mortar complete all as specified and as directed.

M&L for 75mm thick PCC type D2 (1:4:8) using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for 30mm thick Paving tiles using white cement and pigments of size 380mm x 380mm with wear resistant coating of approved design laid with cement slurry @ 3Kg/ Sqm over 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed.

M&L for Virified Ceramic tiles matt finished Dark shade double charged 10 mm thick (square/ rectangular) polished, area of each tiles size 1000mmx1000mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 15 mm thick screed bed in CM 1:4 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area of each tiles size 1000mmx1000mm, in skirting/daddo/wall tiles etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including 10 mm thick rendering in CM 1:3 all as specified and directed. Make:Kajaria/Johnson as approved by GE.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade conforming to IS 15658-2006 with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size complete all as specified and as directed.

Labour for cleaning of weeds, mud, sand, etc., from storm water drain including, excavating of rubbish off from site in poul condition complete all as specified and as directed.

M&L for preparation of new Steel and iron surfaces exceeding 10 cm width or girth and applying 2 coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of old treated steel and iron surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Taking down rain water pipes or drain pipes, (PVC/SWG), (any size or pattern) (wall or floor) including all fittings heads, shoes bends, swn-necks etc., including cleaning or refixing or removal to store complete all as specified and as directed.

S&F 110 mm bore UPVC pipes single socketed in any length with rubber ring joints fixed to walls, laid in trench, complete all as specified and as directed.

All as per item No. 51 above, but 75mm bore complete all as specified and as directed.

S&F 75 mm bore UPVC/PVC (SWR) bends any radius complete all as specified and as directed.

S&F 110 mm bore UPVC/PVC (SWR) bends any radius complete all as specified and as directed.

Supply & fixing in repair UPVC/PVC (SWR) vent cowls 110mm dia complete all as specified and as directed.

M&L for Hardcore of gauge not exceeding 63 mm broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation of manholes etc., and area not exceeding 10 Sqm on plan and not exceeding 1.50m in depth getting out in hard/dense soil complete all as specified and as directed.

Returning, filling in with approved soil obtained from excavation including spreading levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing the excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided complete all as specified and as directed.

M&L for providing pre-cast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) set in cement mortar 1:4 in landings, cover slabs ( for manhole) etc., chullah hoods, chajjas, shelves and similar articles with plain faces complete all as specified and as directed.

M&L for PCC1:4:8 type D2 by using 40mm graded stone aggregate as in foundations, fillings and mass concrete complete all as specified and as directed.

M&L for extra for forming fair finished drains or channel of 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc., complete all as specified and as directed.

M&L for rendering 15mm thick on brick or concrete surfaces of walls in cement mortar (1:4) including finishing the surfaces even and smooth without using extra cement including water proofing compound. NOTE: Water proofing compound will be measured and paid separately.

M&L for reinforced concrete pipes, class NP2 150 mm bore of pipe laid and jointed complete with collars complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP2 200 mm bore of pipe laid and jointed complete with collars complete all as specified and as directed.

M&L for Salt glazed stone ware drain pipe grade 'A' of 150 mm bore of pipe internal dia laid in trenches and jointed in cement mortar complete all as specified and as directed.

M&L for Salt glazed stone ware drain pipe grade 'A' of 200 mm bore of pipe internal dia laid in trenches and jointed in cement mortar complete all as specified and as directed.

Demolition and breaking up drains pipes of 150mm dia bore of pipe (salt glazed ware, AC, PVC or reinforced concrete etc.,) of any description and any size complete all as specified and as directed.

Demolition and breaking up drains pipes 200mm dia bore of pipe (salt glazed ware, AC, PVC or Reinforced concrete etc.,) of any description and any size complete all as specified and as directed.

M&L for cleaning of all blockage of any type of sewage line i.e., branch sewer line, main sewer line etc., manholes of any section and depth, any situation by way of cleaning/ disludging manholes by using any type of manually, mechanically or by way of any other suitable means including foreign materials as well as rodding of sewer lines and between successive from block manholes where required and ordered by Engineer-in-charge and keeping the sewage line functional cleaning trap, water closet, soil waste/vent pipe, gully traps upto final drop out let into septic tanks or central sewage system treatmenting in other adjoining Zone/Area of into sewage well (working in foul condition with taking precautionary measures) equipments with skilled & semiskilled labour as required or applicable all as specified and directed. manholes of any size and depth and removing the sludge/material and depositing outside the MoD land complete all as specified and as directed. Note: Approximate quantity required to clean per month as under :-(a) 100mm dia sewage line -500mtrs (b) 150mm dia sewage line -8700mtrs (c) 200mm dia sewage line -1100mtrs (d) Manholes 1.0X1.0 mtrs size -125 Nos (e) Manholes 1.20X1.20 mtrs size -55 Nos (f) EWC/WC/Nahni traps, gully traps, floor traps-625 Nos

Material and labour for cleaning the septic tanks completely by emptying the liquid, semi solid and solid content including cleaning the inlet, outlet and getting out by using suction pump and filling the foul material in to the covered tanks attached to suction pump and removing, transporting and disposal of the same at a place earmarked for disposal of the foul material by municipal authorities to outside the cantonment area complete all as directed. NOTE: Cubic content of filled up portion of septic tank shall be measured for payment purpose.

Supply only integral water proofing compound complete all as specified and as directed.

Taking out existing water closet, pedestal pattern and replacing with new EWC (Pedestal Pattern) cascade type with flush tank, seat cover etc., white including fixing bolts complete including making good to floor to match with adjoining surfaces complete all as specified and as directed. Make: JAQUAR or equivalent in Hind ware/ Parryware/CERA as approved by GE.

S & F 110mm UPVC/PVC (SWR) soil waste, and vent pipe in any length with Rubber Ring joint fixed to wall / laid in floors including demolition old pipes of any description complete all as specified and as directed.

All as per item No. 75 above, but 75mm dia complete all as specified and as directed.

S & F in repairs UPVC/PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC (1:2:4) type B1 complete all as specified and as directed.

S & F in repairs UPVC/PVC (SWR) gully trap trap 125/110 mm dia plain with grating including jointing with solvent cement and fixed in PCC (1:2:4) type B1 complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) branch piece, single (single Y or T etc.,) equal or unequal 110mm dia with access doors complete all as specified and as directed.

S&F in repairs UPVC/PVC (SWR) branch piece, single (single Y or T etc.,) equal or unequal 75 mm dia with access doors complete all as specified and as directed.

Taking out existing unserviceable water closet and supply and fix vitreous China squatting water closet pan, ORRISA pattern of size 580 x 440mm white with integral foot rest complete all as specified and as directed.

VACON INFRASTRUCTURES

AMK Builders

M/S DIVIJA BUILDERS

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

SAI RUPA CONSTRUCTIONS

abhilasha constructions

LAKSHMI ENGINEERS