SPECIAL REPAIR TO 3RD FLOOR OF BUILDING NO P 104 (S AND T COMPLEX) UNDER GE (WEST) COLABA MUMBAI

Amount

Schedule 'A' Part-I Demolition of brickwork or stone/ boulder masonary, built in cement mortar including all quoins, arches,pillars, etc complete all as specified and directed.

M&L Brick work with fly ash modular bricks, of size-600x200x100mm, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & as directed.

M&L for brick work with fly ash modular bricks, of size-600x200x100mm, straight or curved on plan to any radius in half brick thick walls built in in CM 1:6 complete all as specified & as directed.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work and finished the surface even & smooth (without using extra cement) etc. complete all as specified and directed.

M&L for preparation of new surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1 mm thick (average) wall care putty including rubbing with sand papecomplete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall care putty including rubbing with sand papercomplete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L RCC (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressumm- ers, lintels over 1.5m span etc complete all as specified and direceted.

M&L for 10mm dia & over TMT bars cut to length bent to shap required including craking bend and binding spirally for hooping for columns, hoocking ends and binding with and inclduing mild steel wire (annealed) not less than 0.9mm dia) for securing with clips complete all as specified and direceted.

M&L for 6mm to 8mm dia TMT bars cut to length bent to shap required including craking bend and binding spirally for hooping for columns, hoocking ends and binding with and inclduing mild steel wire (annealed) not less than 0.9mm dia) for securing with clips,as in stirrups, complete all as specified and direceted.

M&L for 8 mm dia TMT bars (for half brick wall) cut to length bent to shap required including craking bend and binding spirally for hooping for columns, hoocking ends and binding with and inclduing mild steel wire (annealed) not less than 0.9mm dia) for securing with clips complete all as specified and direceted.

Taking down chowkhats exc 1.50 sqm and n.exc 4.00 sqm without taking off shutter each complete all as specified and directed.

Taking down chowkhats n exc 1.50 sqm each without taking off shutter each complete all as specified and directed.

S&F for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.

S & F mild steel flat iron as in hold fast clamps and all other similar works conforming to Fe 290. Gde -E-165 complete all as specified and directed.

S&F 30 mm thick flush shutter, solid core construction,with block board core and plywood face panel, commercial type on both sides complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section size 150 mm all as specified and directed

S&F Butt hinges medium weight, cold rolled mild steel 100 mm size complete all as specified and directed.

S&F Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

S&F Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 200 mm long all as specified and directed

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. area tarred exc 0.1 sq m but n. exc. 0.5 sq m each and treated with tar or coal tar black paint complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc over 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L light shade Vetrified Ceramic tiles 10 mm thick (Squar/reactangular) polished area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors s inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified and directed.

M&L light shade Vetrified Ceramic tiles 10 mm thick (Squar/reactangular) polished area of each tilenot exceeding 0.36 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors s inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6) for laying floor finishes complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in vertical surfaces such as skirtings and dados set and jointed in neat cement slurry and pointed in white or coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

S & F anodised aluminium frame/shutter for door, window, ventilator and partitions of any type including sliding/hunge type all as directed with one more rebates including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat ,powder coating (thickness of powder coating 50 micron) etc including all accessories such as glazing clips and rubber beading for fixing of glass panes hinges etc complete all as specified and directed. (glass panes will be measured and paid seperately).

S&F for anodised aluminium door shutters, partitions,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges anodised alumnium snap beading, screws etc. complete all as specified and directed.

Supply & fix 5.5 mm thick sheet frosted glass ordinary quality with oil putty/beading in square exc. 0.5sqm in each pane of any shape & size complete all as specified and directed.

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part made of steel heavy duty and fixed in position complete all as specified and directed.

Material and labour for floor door stopper of aluminium alloy body and tongue, anodised , with hard drawn steel spring overall length of cover plate 140 mm, complete all as specified and directed.

S&F Aluminum deco grill Cat No -104 6mm thick ,cut to required size/shape and fixed in position with aluminium bedding complete all as specified and directed by Engr-in-Charge.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed. Make: Prince/Supreme/Kisan/Reliance/Finolex.

M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as directed. Make: Prince/Supreme/Kisan/Reliance/Finolex.

Demoletion and breaking up drain pipes upto 100/110 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

Demoletion and breaking up drain pipes upto 75 mm dia (Salt glazed ware,AC, PVC or reinforced concrete) set in cement mortar complete all as specified and directed

S&F 110 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends with access doors any radius.complete all as specified and directed.

S&F 110 mm dia PVC (SWR) junction single, (single T) equal or uequal provided with access door complete all as specified and directed.

S&F 110 mm dia PVC (SWR) vent cowl.complete all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F PVC (SWR) bends 75mm radius complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia bore complete all as specified and directed

Taking up or down steel tubing and connection including cleaning for refixing or removed to store,20 mm dia bore complete all as specified and directed

Fixing only old 15 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

Fixing only old 20 mm steel tubing and including cleaning in positon (walls, ceiling and floor etc complete all as specified and directed

S & F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

S & F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floors complete all as specified and directed

Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and directed.

S&F in repair vitreous China wash basin with pedestal white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete.all as specified and directed Make:-(Hindwaere/parryware/Cera )

S & F of white, vitreous china under counter basin having size of 550mm x 445mm and including waste coupling & CP bottle trap and all connected works complete all as specified and directed. Make : - Cat Part No C0407 of Parryware or equivalent in CERA/Jaquar/Hindware

S & F in repairs urinals spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum wt 60 gms) fixed inposition complete all as specified and as directed. Make:-(Hindwaere/parryware/Cera )

S & F in repairs for vitreous china, bowl urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. Make:-(Hindwaere/parryware/Cera )

S&F as in repairs 15 mm bore fancy type angular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions . all as specified and directed

S&F as in repairs 15 mm bore fancy type concealed stop cock (regular body) cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed .

Supply and fix as in repairs15 mm bore ,brass cromiunm plated, fancy type heath fauset with SS connection pipe 1 mtr long complete all as specified and directed.

Supply & fix in repairs CP toilet paper holder complete all as specified & directed.

S&F PVC connection 15mm size PTMT nuts of length 450 mm.complete all as specified and directed.

S&F as in repair 15 mm bore fancy type bib taps long body cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule. complete all as specified and directed.

M&L in repair fancy type CP Towel Rail 61 cm long complete all as specified and directed.

M&L in repair CP soap dish all as per cat part.complete all as specified and directed.

S&F sheet glass corner shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed

S&F grating round 150mm size of PTMT(minimum 100 gms) complete all as specified and directed.

S&F in repairs15 mm bore piller taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts. all as specified and directed

Schedule 'A' Part-II Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., and making good to the disturbed surfaces of walls, floors etc., complete all as specified as directed.

Taking down carefully copper/aluminium submain wiring (AC, DB to DB) complete including all fittings and fixtures such as switches, pendant, lmp holder, regulators, switch socket outlet, tube light fittings,Plug socket box etc., and making good to the disturbed surfaces of walls, floors etc., complete all as specified and directed.

M & L for point wiring (concealed type) for light point in and including rigid non-metallic PVC heavy duty conduit, 19/ 20 mm dia suitable size including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLSH PVC insulated, unsheathed, multi stranded copper conductor cable single core, 1100 volts grade with moudular flush type metal boxes suitable for fixing modular switches, sockets and fan regulator etc., including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as an earth wire connected to common earth and earth dolly as per IS specification and as specified in SSR Part-I complete for one light point controlled by one switch.

All as per item No. 77 here in before but bell point controlled by one switch

All as per item No. 77 here in before but for one ceiling fan / exhaust fan controlled by one switch & regulator

All as per item No. 77 here in before but one 3 pin socket 5 amps, on same board.

All as per item No. 77 here in before but one 3 pin socket 5 amps, on independent board.

All as per item No 77 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unseathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor connected to common earth dolly complete all as specified & as directed by engr-in-charge.

S & F Switch Piano, flush type single pole, one way 5 Amp Make: Anchor, Fine, SSK

S & F Switch Piano, flush type single pole, one way 15 Amp Make: Anchor, Fine, SSK

S & F Socket 2/3 pin 5 Amp Make: Anchor, Fine, SSK

S & F Socket 2/3pin 6/16 Amp Make: Anchor, Fine, SSK

Supply and fix Stepped type fan step regulator, 450 volts, 2 module complete all as directed. Make: Anchor, Fine, SSK

S & F bell push,6 amp Make: Anchor, Fine, SSK

S & F ceiling rose, 3 terminals of 28 X 50mm, PVC/ poly carbonate, isolated body complete all as directed. Make: Anchor, Fine, SSK, Kinjal.

S & F Lamp holder, insulated body, with black plate for angular batten fittings with one PVC block of size 75mmX75mm for mounting the fitting including one LED lamp 15 Watt complete all as specified and directed Make of Lamp :- Philips/ Havells/ wipro

S & F 20 watt LED, 4 feet long,6500 K, fixed on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directed Make:Havells cat pt no LHEXBXPNIN1W020 equivalent model in Wipro model no - Wipro Garnet 20 W LED Batten 6500K / Philips model No - BN150W LED 20S-6500 PSE ODGR / OSRAM.

S & F Calling bell ding dong type 230 V all as specified and direted.

S & F surface mounted 10 watts LED tube light fitting, mirror light fitting with lamp and connecting up with copper 3 core flexible cord of minimum size 0.5 sqmm complete all as directed. Make:- Wipro, Model No : Wipro Garnet 10W LED Batten 6500K or in equivalent model in Osram/Havells / Philips model no BN021LED10S-2ft.

S & F MCB SP in repair, 240 volt, 6 to 32 Amps, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

S & F MCB SPN in repair, 240 volt, 40 Amps, complete all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB

S & F sheet metal enclosures in repair, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S & F LED 36 Watt fitting in repair, minimum 110 Lumin per Watt, recess mounted circular downlighter fitting,in repair, slim type,of size 60 cm X 60 cm square type, with electronic driver of same make connecting cable three core PVC insulated and PVC sheathed copper flexible cable of size 16/0 20mm and necessary fixing arrangement complete all as directed . Make : Havells, Cat Part No :ENDURASLIMPROPLUS2X2 PLR#^WLED840MOD or equivalent model of Wipro Model No LD25-361-XXX-65-G1*** / Philips Model No RC380BLED 34S-6500 L60W60PSDOD-51 /Osram

S&F DB vertical type 6 way TPN in repair, doubble door load line powder coated complete alongwith 200 Amp rated bus bar with 200 amp MCCB, fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB

S & F Exhaust fans AC single phase 230/240V of size 300mm sweep, 1400 RPM, with louver complete all as directed. Make:- Khaitan/ Havells/ Orient/ Bajaj

S & F Ceiling fans with 2 feet down rod and accessories, AC single phase 230V of size 1400mm sweep with fixing of anchor fastner and 'S' type hook complete all as directed by E-in-C. Make:- Havells/ Orient/ Khaitan

S & F Single pole and neutral enclosure, in repair with a two pin and earth plug and socket 20 Amp complete with one single pole MCB

M&L sub main wiring in repair for TPN DB to SPN DB with with two run of 16 Sqmm stranded copper conductor with one run of 16 sqmm stranded copper conductor (FRLSH) as earth continuity conductor connected to common earth dolly including adequate size of PVC Copnduit for housing the wires complete all as specified. Note : (i) Two single core cable and one run of earth copper conductor/Casing capping will be measured and paid as one unit length

M&L sub main wiring in repair for AC with with two run of 4 Sqmm stranded copper conductor wire (FRLSH) with one run of 4 sqmm stranded copper conductor as earth continuity conductor connected to common earth dolly including adequate size of PVC Copnduit for housing the wires complete all as specified. Note : (i) Two single core cable and one run of earth copper conductor/Casing capping will be measured and paid as one unit length

S & F cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, elctric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core on wall with saddle. Make FOR CABLE : Havells/ Plaza/ Asian Cable/ Polycab

M/s Qureshi Construction Co

ASHOK CONSTRUCTION

SHREE JAGDISH FURNITURE CO.

M/s JAYPEE ENTERPRISES