Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.6 LAccepted-AOC 56 C 2 BIDHAN NAGAR ROAD ULTADANGA KOLKATA 700067 | KOLKATA | KOLKATA | WEST BENGAL | 700067 | ₹6.6 L | L1 | Accepted-AOC Quoted rate found Lowest (L1). |
| 2 | L2₹6.8 LRejected-Finance DESHBANDHU PARA ENGLISH BAZAR JHALJHALIA MALDA WEST BENGAL 732102 | MALDA | MALDA | WEST BENGAL | 732102 | ₹6.8 L | L2 | Rejected-Finance Quoted rate found 2nd Lowest (L2). |
| 3 | L3₹6.9 LRejected-Finance RAJA SARAT CHANDRA ROAD PURATULI ENGLISHBAZAR DIST MALDA PIN 732101 | MALDAH | WEST BENGAL | 732101 | ₹6.9 L | L3 | Rejected-Finance Quoted rate found 3rd Lowest (L3). |
| 4 | L4₹6.9 LRejected-Finance | ₹6.9 L | L4 | Rejected-Finance Quoted rate found 4th Lowest (L4). |
| 5 | L5₹7.0 LRejected-Finance MAYURAKSHI ELECTRICAL MECHANICAL DIVISION WEST BENGAL WB | PURULIA | WEST BENGAL | 723101 | ₹7.0 L | L5 | Rejected-Finance Quoted rate found 5th Lowest (L5). |
Tender Value
₹7.4 L
EMD Value
₹14,805
Closing Date
16 Feb 2026, 3:00 pmClosed
EXECUTIVE ENGINEER PWD MALDA ELECTRICAL DIVISION
O/O THE EXECUTIVE ENGINEER PWD MALDA ELECTRICAL DIVISION Singatala Malda PIN 732101
Repair of the campus road towards COVID building and main Gate of the campus, also construct a new covered corridor to connect OT of the old building and COVID building of the Gazole SGH block, Malda - E.I Works
2026_WBPWD_996573_1
WBPWD/EE/MED/e-NIT-51/2025-26 (2nd Call)
Open Tender
ELECTRICAL WORKS ORG
15 days
Gazole
Please refer Tender documents.
6 documents required · 6 mandatory
₹14,805
21 May 2026
30 Jan 2026
18 Feb 2026
30 Jan 2026
16 Feb 2026
9 Feb 2026
Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Piano key type switch (Anchor make) fixed on sheet metal (16 SWG) switch board with bakelite/perspex (wall matching colour) top cover (3 mm thick) flushed in wall incl. mending good damages to original finish as per GS.
Average run 8 mtr
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works as per GS.
Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire ( Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. Connection as required.
2x(1.5 sqmm)+1x(1.5 sqmm) [E-9 ]
2x(2.5 sqmm)+1x(1.5 sqmm)(For Power plug & Computer Plug) [ 1(s) / E-9 ]
2x(4 sqmm) + 1x (2.5 sqmm) as ECC
2x (6 sqmm) + 1x (4 sqmm) as ECC
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes .
2.5sqmm [9 (i)/F-5]
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS.
2+8 Way [Siemens Enclosure (8GB32102RC10) / Schneider Enclosure-(A9HSND08) or equivalent model of Legrand/L&T] as per direction of EIC. [13 / D- 9 & D-10]
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS [Make-Legrand/ Schneider/Siemens/L&T/ ABB) as per direction of EIC.
Supply & Fixing Modular type 240 V, 16A, 3 pin plug socket with separate 16 A Modular type switch(Make- Legrand-Model Arteor/Myrius / Schneider Model Livia or equivalent model of Crabtree/Equivalent make as per direction of E.I.C) on sheet metal switch board embedded in wall as per GS. [ 9(b) / E-18]
Supply & Fixing 240 V, 25 A, Modular type AC starter (Make Legrand-Model Arteor/Myrius / Schneider Model Livia or equivalent model of Crabtree/Equivalent make as per direction of E.I.C) with 25A Modular switch type DP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[17 / E-19]
Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.
Supplying and fixing Sheet steel Main Switches on flat iron frame on wall as per GS. [Havells, HPL / LK (formerly known as L & T]. 32A
Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991) as per GS. 2 bars 240 V, 63 A,2 x 20x5mm
Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required as per GS.
Supply and delivery of single/twin Industrial LED Batten luminaries incl. Supply of 1 no./2nos. 18W LED Tube with submission of test report and warranty certificate for atleast two years from OEM.
Single Fittings (Make- Philips, Cat No. TMC-501 P1xT-LED 22W P3241 or equivalent model of Crompton/ Bajaj / Wipro/Havells/HPL) incl. 1 no. 18W Master LED Tube [NS]
Supply and fixing 9W LED bulb (Make Bajaj/Crompton/HPL/Philips/Wipro /Havells) on existing batten holder.
Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint as per GS . [H-5/5]
Supply and Fixing of 240V, 50Hz 90W LED Street lighting luminaires having delivering efficacy >100 lumen/watt with PDC housing, Cat no-BRP033LED90 CW SLR GR PSU SPD. (Make- Philips or equivalent model of Wipro / Jaquar / Bajaj / Surya / Havells / Crompton) with submission of OEM with 3 years warrenty and test certificate) NS
Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting as per GS.
Supply and delivery of 240V, 50 Hz 1400 mm sweep A.C ceiling fan (rich brown) with burst-proof P2/S3 Capacitor (Make- Usha, Model- Striker Plus or equivalent model of Orient Electric / Crompton / Bajaj) complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire (without regulator) with submission of report and warranty certificate for atleast 2 years.
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2 ]
Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [5(a)(i)/G-2]
Supply of 2 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make Nicco / RR / Polycab / KEI / Havells].
4 core 16 sqmm
2 core 10 sqmm
Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as per GS.
upto 2 core 6 sqmm [ 2(b)/ F- 1 ]
Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting as per GS.
Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trench for single, 2, 3, 3½ & 4 core as per GS.
Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed as per GS.
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish as per GS.
From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core as per GS.
2 core 10 sqmm [F-4] & F-5]
4 core 16 sqmm
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required
32 mm dia
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment as per GS.[ Legrand]
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [L&T, Havells, Seimens]
Supply of LED Tube illuminated sign board fabricated by 16'(L)x6'(H)x10" (W) ACP box supported with 50 x 50 x 6 mm M.S. Angle structure all around with 40mm x40mmx 1.62 mm Al. edg angle for front portion only. The back side of the cover (6' x 1.5' x 6mm MS sheet with 25x25x6mm MS angle supported frame) will be fabricated with hinges in such a way so that it can be opened for maintenance purpose with 3/4 nos. doors .6' x 1.5' x 6mm MS sheet will be fixted at the two oppopsite sides of the back portion with support of 25x25x6mm MS angle. The 3 mm ACP facial should be provided with laser cutting of 6 mm laser cut Acrylic letters out of which 5 mm rising and back portion of the ACP board should be pasted with 2mm thick Clear Acrylic Sheet of same size as ACP facial as per the direction of EIC.The sign board should be illuminated by 18W LED Tube lamps (24 nos.) (Type- MAS LED Tube lamp 18 W 2100 lm) with Tube fittings to be fixed by hooking arrangement with iron stucture fabricated by 20x3mm MS flat for fixing purpose. Back side of the of the board should be covered carefully with the said direction to protect rain water. The matter to be displayed will be as per direction of EIC.This febricated display structure is to be fixed on the top of the main gate roof on the prefabricated iron structure as per direction of EIC.
The above Sign board will be fixed on the main gate roof of the GSH , Gazole after fabricating the iron structure with the following materials -
a) Supplying M.S. angle (50 x 50 x 6 mm) (18 mtr.) 4.5 kg/mtr.
b) Supply of MS base plate (8mm x 305mm x 508mm) (9.73 kg x 4 nos. = 39 Kg )
c) Supply of MS Channel (100x50x6mm) 3 kg/ mtr.(4.5mtr.)
Transportation Charge of above materials without Sign board from Co's workshop to worksite. (2.5% of total of item no.-2)
Cutting and drilling holes 20 nos. on MS plate with grinding the plate. This plate is to be welded with the precutting roof with S/F 4"x0.5" size fastner.
Fabrication charge of the iron structure incl. hiring of welding machine.
One coat of red lead/Zinc chromate priming [7B( c )/H-2]
1st coat of synthetic enamel paint over the primer [7B( d )/H-2]
2nd coat of synthetic enamel paint over the 1st coat[7B( e )/H-2]
Add 18% GST (on Item No. 01.00 to 40.00).
Add 1% CESS (on Item No. 01.00 to 41.00).
N.B.: 1) Sl. No. 41.00 is variable depending on the total cost of the actual work on which 18% GST to be calculated during measurment of the work (Item No. 01.00 to 40.00). 2) Sl. No. 42.00 is variable depending on the total cost of the actual work on which 1% CESS to be calculated during measurment of the work (Item No. 01.00 to 41.00).
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.23 MB
Tendernotice_2.pdf
PDF • 2.93 MB
2911.pdf
Tender Documents • 0.42 MB
BOQ_2438948.xls
BOQ • 0.99 MB
Download all tender documents and submit your bid