Construction of sakav at -karanjade boudhvasti Road, V.P. Karanjade, Tal - Panvel, Dist - Raigad

Item No. 1:- Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Item No.2:- Excavation for foundation in hard murum and boulders including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete.

Item No.3:- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Item No 4 :- Providing cast in situ / ready mix block of M10 cement concrete with circular or other shaped opening for waterway including necessary formwork, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ), cement 4.05 bags/cumt)

Item No 5 :- Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources)

Item No 6:- Providing and laying in situ / ready mix / ready mix M 25 CC of trap/ granite /quartzite /gneiss metal for the bottom plugs of wells in the dry condition including compaction and curing wherever necessary etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)

Item No 7 :- Providing and laying in situ / ready mix M-30 plain cement concrete of trap /granite/quartzitel gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "y" shaped false joints to form suitable panels on the faces to curing |approve design with compacting by vibrating and complete, plywood/steel including form work centering excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m |in followinh manners (a) Height upto 5 M. (With Concrete Mixer)With Natural / VSI standard Artificial Sand

Item No 8 :- Providing and laying in situ controlled M-30 of trap metal for R.C.C.caps over piers and abutments including necessary scaffolding, formwork compaction by vibrating finishing and curing etc. complete.

Item No 9 :- Providing tar paper bearing of aoorived quality in proper.. .. etc complete

Item No.10 :- Providing expansion joint with 25 MM thick bituminous pad.. .. etc complete (a) Height upto 5 M. (With Concrete Mixer)With Natural / VSI standard Artificial Sand

Item No.11 :- Providing and laying in situ cement concrete M 30 of trap metal for R.C.C. work in solid slab including centering. formwork, scaffolding, ramming, vibrating |finishing in cement plaster and curing etc. complete.

Item No.12 :- Providing and cutting bending hooking laying in position and tying H.Y.S.D. steel bar..

Item No.13 :-Providing railing of M.S.anglepost 2m c/c of section 75 x 75 x 10 mm .. .. etc complete

Item No.14 :- Providing and laying weep holes of 110mm dia of A.C. pipes.. .. etc complete

Item No.15 :- Compressive Strength of C.C. Cube (Set of 3 cubes)

Item No.16 :- Test Sand

Item No.17 :- Test Cement

Item No.18 :- Providing and fixing 25 mm marbletablet size and description as per detailed drawings

Add 0.50 % For work Insuramce

Add 18 % for GST Charges

Add 1% for SQM Charges

Royalty charges other materials

Please Enable Macros to View BoQ information