Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.3 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹8.5 L+₹26,045 (3.15%)Rejected-Finance GALI BAWARI WALI NOHARIA BAZAAR SIRSA 125055 HARYANA | SIRSA | HARYANA | 125055 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹8.8 L+₹57,434 (6.95%)Rejected-Finance NOT FOUND | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹9.1 L+₹83,443 (10.1%)Rejected-Finance VILL BANSUDHAR POST KHARNKA DISTT SIRSA HR PIN 125055 | SIRSA | HARYANA | 125055 | L4 | Rejected-Finance Other than L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
22 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA HARYANA-125055
Repair/Maint of E/M Installation of B/R Nature at AF Stn Sirsa
2022_MES_565150_1
GE/SRA/T-44/2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) SIRSA
Please Refer Tender Documents
8 documents required · 8 mandatory
₹500
GE (AF) SIRSA
₹20,000
Yes
24 Jan 2023
24 Nov 2022
24 Dec 2022
24 Nov 2022
22 Dec 2022
8 Dec 2022
25 Nov 2022 - 2 Dec 2022
Amount
Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed.
Taking down Chowkhat or Frame of any description (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.
Taking down Shutter of any description, exc. 1.00 Square Metre but not exc. 2.00 Square Metre Each, complete all as specified and as directed.
Taking down Steel Window with Frame (complete), area not exc. 1.50 Square Metre Each, complete all as specified and as directed.
Dismantling Pre-Cast Concrete Blocks of any description or thickness in Floors, Aprons, etc. and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Dismantling Structural Steel or Mild Steel Work of any description not otherwise provided for, complete all as specified and as directed.
Dismantling of ceiling boards of any thickness, including cover fillets complete all as specified and as directed.
Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
Hacking out old broken Glass (any thickness, size, quality or description) from Metal Frames, glazed with putty or fixed with beads, complete all as specified and as directed.
M&L Coarse Aggregate 40mm graded, spread around Sub-station, Poles, or any other locations in required thickness, area on levelled, complete all as specified and as directed.
M&L Brick Work with fly ash bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:4, complete all as specified and as directed.
All as per item No. 12 here-in-before but except bricks.
M&L Second Class Hardwood Plain framed, 35 mm thick panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces., kiln seasoned and chemically pressure treated: and fitted to Steel Frame, complete all as specified and as directed.
M&L Glazed and Skeleton Shutter 35mm thick of Second Class Hardwood prepared to receive Gauge/Glass (without Sash Bars) fixed with mitred beads supplied and fitted to Chowkhat and securing Glass, Gauge, etc. sizes of Members of Shutter as specified in SSR Part-I, Section-8, Clause 8.24(a), complete all as specified and as directed.
S&F Solid PVC Door Frame of Wood grain of size 50x47mm made out of 5.0mm Plain Colour (Ivory shade) PVC Sheet Reinforced with Mild Steel Square Tube and fixing in Opening, complete all as specified and as directed.
M&L Factory Made Solid Panel PVC Door Shutter 30mm thick (Style) Plain colour (Ivory shade) consisting of Frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall be covered with heat moulded wood grain PVC ‘C’ Channel having a PVC Sheet Strip of 20mm width stuck inside with Solvent Cement for Stiles and Wood Grain PVC Sheets for Top Rail, Lock Rail & Bottom Rail on either Side and as gap insert for Top Rail & Bottom Rail, Panelling of Wood grain PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable 5mm thick x 15mm wide PVC Sheet Beading used inside Stiles and Rails and decorative PVC Beading of 10mm x 10mm (90°) and jointed together with Solvent Cement and fixing in the Frame and hanging/fixing with and including Stainless Steel Hinges, complete all as specified and as directed. NOTE : Stainless Steel Hinges will be Measured and Paid under appropriate Item.
M&L Steel Window Box type using ERW ‘P’ Section comprising Double Frame for Gauged and Glazed Skeleton Shutter jointed internally with Flat Iron 40x3mm complete including Aluminium Tower Bolts, Hinges, Handle, Stops, Lugs including GI Steel Wire Cloth, Glazing, etc. all as directed. Outer Section of Frame should be 50x25mm and Inner Section should be 40x20mm, complete all as specified and as directed. NOTE :- (a) For the purpose of Measurement & Payment Double Shutter with Frame shall be considered as One Unit. (b) Cost of Aluminium Mongery as ordered/required at Site, GI Steel Wire Cloth will deem to be included in the Quoted Unit Rate. (c) Guard Bars are included in the Quoted Unit Rate. Spacing of 10mm Square Bar will be 10 Cm Centre to Centre. (d) Glazing shall be measured & paid separately under appropriate Item.
S&F Aluminium Barrel Tower Bolt 100mm long extruded section, complete all as specified and as directed
All as per item No. 19 here-in-before but 150mm long.
S&F Aluminium alloy, anodized, Sliding Door Bolt 250mm long with Hasp Staple (Bolt type) and Fixing Clips of Sheet cast or extruded section and fixing Bolts and Sliding Bolts of extruded section and fixing, complete all as specified and as directed.
S&F Aluminium Steel Butt Hinge of size 100mm (weight not less than 80 Gram), complete all as specified and as directed.
S&F Extruded Aluminium alloy Handle 125mm long, Fabricated type, anodised, complete all as specified and as directed.
All as per item No. 23 here-in-before but 150mm long.
S&F Mild Steel 150 mm, Ordinary Rat Tail Rod pattern Springs including Roller and Roller Plate and fixed, complete all as specified and as directed.
S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, etc., complete all as specified and as directed.
All as per item No. 26 here-in-before but in repairs.
S&F Sheet Glass 4.0mm thick, Ordinary quality and glazing with Oil Putty in Square not exc. 0.50 Square Metre in Each Pane, complete all as specified and as directed.
S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS . S 1161-1979 grade St-240 complete all as specified and as directed.
S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 -W(Gde-E- 250) quality-A, complete all as specified and as directed.
Taking down existing Steel Rolling Shutter including Hood Cover, Pull and Push type, not exc. 8.00 Sqm area of Sides of clear opening and cleaning the Side of Shutters suspension Shafts, Anti-guide Channels and greasing to all the movable Parts of Rolling Shutter and straightening Rolling Shafts including replacement of Bolts, Nuts, etc. as required for smooth functioning of Shutter and re-fixing the same including Hood Cover, complete all as specified and as directed.
Taking down existing Steel Rolling Shutter including Hood Cover, Pull and Push type, exc. 8.00 Sqm area of Sides of clear opening and repair/replacement of rolling shutter 1.25 thick steel sheeting and also providing with grilled rolling shutter at the height of 1.2 metre for sufficient ventilation including repair/replacement of side suspension of rolling shutter, cleaning the sides, Shafts, Anti-guide Channels and greasing to all the movable Parts of Rolling Shutter and straightening Rolling Shafts including replacement of Bolts, Nuts, etc. as required for smooth functioning of Shutter and re-fixing the same including Hood Cover, complete all as specified and as directed.
S&F 0.63 mm thick Galvanised, Corrugated mild steel sheeting with two corrugations side lap fixed with coach screw and washer in roof, walls etc. with grade of zinc coating 275, including dismantling of the same, complete all as specified.
M&L Cement Concrete 1:4:8 type D2 (40mm graded stone aggregate) 75mm thick in Sub-bases, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 type B1 (20mm graded stone aggregate) 100mm thick as in Path/ Hard standing, laid in alternate Bay/Panel, finishing Cement Concrete surface Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L Non-skid Coloured Ceramic Tiles 7 to 8.0mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed.
M&L Coloured Glazed Ceramic Tiles 300x450x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick rendering in Cement Mortar 1:3, complete all as specified and as directed.
M&L Exterior wall cladding tiles, 7-8 mm thick, of size exc 0.11 sqm but not exc 0.18 sqm each, designer type & coloured suitable for wall, column, pedestal etc Set & jointed in Neat Cement Slurry and Pointed in coloured cement to match the shade of tile and including 15mm thick rendering in CM (1:3) on brick work or concrete surface on wall and shall be finished even and fair to receive the tiles, complete all as directed by Engineer in Charge. NOTE : Cost of screed bed shall be deemed to be included in the Quoted Unit Rate.
M&L Machine Pressed Pre-cast Concrete Interlocking Polished Paver Block 60mm thick of M-35 Grade, with Grey Cement and Pigment of any shape and size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean dry Sand as in Floors, complete all as specified and as directed. NOTE : Clean dry Sand will be Measured and Paid separately under appropriate Item.
M&L Sand filling under Floor or in Foundation including watering and consolidation, complete all as specified and as directed.
M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces like facia and chajja, Plastered Surfaces finished Even and Smooth without using Extra Cement, including taking down and raking out joints, complete all as specified and as directed.
M&L Rendering 10 mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, including taking down and raking out joints, complete all as specified and as directed.
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces including taking down of existing plaster complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".
M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even including taking down and raking out joints, complete all as specified and as directed.
Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed.
M&L preparing newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L preparing old Plastered Surfaces of Ceiling and applying a Coat of White Wash, complete all as specified and as directed.
M&L preparing newly Plastered Surfaces of Walls by applying Wall Care Putty including Rubbing down with Sand Paper to obtain a Smooth Finish Surface and applying Two Coats of acrylic distemper (as approved) over a Coat of Primer, complete all as specified and as directed.
M&L preparing old Decorated/Treated Plastered Surfaces of Walls and applying One Coat of acrylic distemper (as approved), complete all as specified and as directed.
M&L preparing newly Plastered Surfaces of Walls by applying Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of weatherproof exterior emulsion paint (Plain pattern) with approved Tint over a coat of Primer (as per Manu-facturer's instructions), complete all as specified and as directed.
M&L preparing newly Rough Cast Plastered Surfaces of Walls and applying Two Coats of weatherproof exterior emulsion paint (Plain pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed.
M&L preparing new previously untreated/Painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying two coats of Synthetic Enamel Paint (First quality) over a coat of pink primer, complete all as specified and as directed.
M&L preparing old Decorated/Painted Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
M&L preparing new or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L preparing old Decorated/Painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed.
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe incl ,waste coupling (Minimum weight 32mm-45gms),urinal spreader, fixing with plugs etc complete all as specified and as directed. (MAKE : PARRYWARE, Cat No. C0501 / HINDWARE, Cat No. 60001 / CERA, Cat No: S4020103 or equivalent model in ESSCO)
S&F in repair Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision of Lime Concrete Bedding and Making Good to Floor/distrubed surfaces, complete all as specified and as directed. (MAKE : CERA, Cat No: S3010109 / HINDWARE, Cat No. 20042 / PRAYAG, Cat No: 4054 / ASIAN PAINTS, Cat No: WM-32-X)
S&F in repairs Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back) with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. (MAKE : CERA, Cat No: S2040119 / HINDWARE, Cat No. 10100 / PRAYAG, Cat No: 4645 / ASIAN PAINTS, Cat No: PN-03-X)
M&L in repair PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC Waste Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3 , complete all as specified and as directed. (Make : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model: Corona /ASIAN PAINTS, Model: TREND)
S&F in repair Chromium plated brass Bib cock with wall flange, fancy type, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : Ess Ess, Cat No: RB-103 / PRAYAG, Cat No: 6706 / Essco, Cat No: SQT-512KN / SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Pillar tap, fancy type. with areator, fixed to wash hand basin, complete all as specified and directed. (Make : ESS ESS, Cat No: RO-101 / PRAYAG, Cat No: 6702 / Essco, Cat No: SQT-507KN / SOMANY, Model: ETHER)
S&F in repair Chromium plated brass Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make :ESS ESS, Cat No: RO-112 / PRAYAG, Cat No: 6710 / ESSCO, Cat No: SQT-526NKN / SOMANY, Model: ETHER)
M&L Galvanised Tubes 15mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors, including taking up or down and segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use , complete all as specified and as directed.
M&L Galvanised Tubes 20mm bore (dia), 'medium grade', with all Fitting and fixed complete to Walls and Ceilings or laid in Floors, ,including taking up or down and segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use complete all as specified and as directed.
M&L Rotational Moulded Polyethylene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position including dismantling / lowering down unserviceable Water Storage Tanks, complete all as specified and as directed.
S&F Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed.
S&F in repair Gun Metal Gate Valve 20mm bore (dia) with Iron Wheel Head including Flange, screwed both Ends for Iron Pipe, complete all as specified and as directed.
M&L for Raking out joints & flush pointing in CM 1:3 to brick tiles, laid flat, in roofs, etc., complete all as specified and as directed.
S&F GI Powder Coated Snap grid Frame Work of Size 600X600mm for false ceiling with supported and hanging with mild steel wires and hooked to ceiling with fasteners including provision of 12 mm Gypsum board fixed on snap grid, complete all as specified and as directed.
S&F Gypsum Board 12 mm thick of Size 595X595mm as in False ceiling fixed on existing snap grid frame work with steel screws, complete all as specified and as directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D or equivalent model in JEXON)
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid separetly as "Supply only".
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .