ADDN ALTN TO OFFICERS MESS (T-13) AT AF STN JAIPUR

Amount

Taking down chowkats or frames not exc 1.5 sqm each but with shutters (without taking off shutters from the frame) complete all as directed.

Ditto all as per item No.2 here-in-before but exceeding 1.5 sqm and not exceeding 4 sqm each.

Dismantling of wall and ceiling/cup boards (fibre, pulp, insulation, etc) or insulation boards/slabs, blankets, any thickness, including cover fillets, fixed in any position complete all as specified and directed.

Demolition of cement concrete (unreinforced) in above ground floor and paving nexc 15 cm thickness complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for cutting opening through old stone masonry walls, built in cement mortar for door, window and other opening, etc or cutting out defective masonry for underpinning including providing fixing and removing shoring, cleaning and stacking stone and removing surpulus to store and rubbihs off the premisses complete all as specified and directed.

M&L forming jambs etc to opening (to foregoing item) with stone including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work in cement mortar 1:4 complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M&L AAC block masonry, straight or curved on plan exc 6 m mean radius, built approved adhesive complete all as specified and directed.

M&L for cement concrete type B0, 1:2:4 (12.5 mm graded aggregate) as in window cill or similar work complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade over and including 20 mm thick screed bed or bedding in CM 1:4 complete all as specified and directed.

M & L for 1st class hardwood plain solid straight chowkats and frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M & L for 35 mm thick factory made 1st class hardwood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc with sash bar any number fitted with cut and mitered beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, Section 8.24 (a) and fitted to chowkats complete all as specified and as directed.

Ditto all as per item No. 13 here-in-before but 30 mm thick for window, ventilators etc, are provided with stiles and rails as specified in SSR part-I, section 8 clause 24 (b).

Ditto all as per item No. 13 here-in-before but 30 mm thick for window, ventilators etc are provided with stiles and rails as specified in SSR part-I, section 8 clause 24(b) without sash bars.

S&F first class hard wood, 40 mm thick, plain, framed panelled shutters, (any number of panels) with panels solid, ,retated bolection moulded beads is provided and planted round panlels, both sides, complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating lot less than 50 micron) aluminium frame for doors, windows, ventilators with one or more retates including joining cleats for fixing etc complete all as specified and directed.

S&F powder coated (minimum thickness of powder coating lot less than 50 micron) aluminium window and ventilators shutters of doors, windows & ventilators including providing and fixing hinges/pivots & making provision for fixing of fittings whrere required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing necessary filling up the gap at junctions, i.e at top, bottom and sides with required EPDM rubber/neoprene gasket etc and jointed mechanically where required including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws all complete as per architectural drawing complete all as specified and directed.

S&F anodized aluminium grill (anodized transparent or dyed to required shade accoring to IS : 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with CP brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening szie for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, complete all as specified and directed.

S&F 18 mm thick ply wood with 1 mm thick sunmica on both sides, including first class hard wood beading (decorative) type for lipping, moulding of edges etc as in cupboard shutters, shelves, drawer etc with brass fitting such as hinges, handles, locking arragement, drawer pulls, drawer roller etc complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.

S&F but hinges of size 100 mm, cast brass with mild steel hinge, pin, bright polished and fixed type B-11 complete all as specified and directed.

S&F but hinges of size 75 mm, cast brass with mild steel hinge, pin, bright polished and fixed type B-11 complete all as specified and directed.

S & F PVC hinges of 100 mm long complete all as specified and directed.

S & F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed.

S & F 200 mm long brass barrel tower bolts with cast or sheet barrel and rolled cast bolts and fixed complete all as specified and as directed.

Ditto all as per Item No 27 here-in-before but for 150 mm long.

S & F 125 mm long Aluminum anodised bow handle fabricated type extruded section complete all as specified and directed.

S & F 150 mm long brass handle, cast type, polished brasscomplete all as specified and directed.

S & F 125 mm long brass handle, cast type, polished brasscomplete all as specified and directed.

S & F 300 mm long, brass sliding door bolts with sand or die-cast brass hasp and staple(bolt type) and fixing bolts with rolled or drawin brass bolts and fixed complete all as specified and directed.

S&F brass mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed.

S&F floor door stopper brass body and tongue with hard drawin steel spring, overall length of cover plate 150 mm dia, complete all as specified and directed.

S&F gate and shutter, hooks and eyes, brass wire type-I 150 mm size, fixing with brass screws complete all as specified and directed.

S&F brass 300 mm, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F door closer, aluminium (extruded section body), hydraulically regulated, designation No 3, unversal type, stuitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F sheet glass 3 mm thick ordinary quality and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as directed.

S&F 3 mm thick figured glass pin head type and glazing with oil putty in square n. exec 0.5 Sqm in each pane complete all as specified and as directed.

M&L for Framed work as grills with end bars shoulders/framed guard bars and similar work conforming to Fe-410 or 310 complete all as directed

M&L for Mild steel small articles such as flat iron 25x3mm thick for hold fasts etc conforming to Fe 410-0, or 310-0, all as specified and as directed.

M&L for cutting in stone walls built in cement mortar depth of embeded portion of hold fast exc half brick and not exc one brick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required.

M&L for toughned glass, 12 mm thick of any size including cutting to shape as in sliding windows with stainless steel sliding track (two track) including necessary fittings, such as handles, sliding roller, locking arrangment complete all as specified and directed.

M&L for toughned glass, 12 mm thick of any size including cutting to shape as in fixed type windows with stainless steel fraome around the glass including fixied to opening complete all as specified and directed.

S&F for rolled section as main and cross beam, hip and jak rafters, purlins where connected to common rafters and running, rails, vertical members and guides for sliding doors, fixed with angle creats or other connecting plates etc confirming Fe-290, Gde E-165 complete all as specified and directed.

S&F for 2 mm thick glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screws and washers in roof wal etc complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic varnish over and including a coat of wood filler liquid transpaarent complete all as specified and as directed.

M&L preparation of new surfaces of steel and iron of any description over 10 cm in width or girth not otherwise described, and applying two coats of synthetic enamel paint over a coat of red-oxide primer complete all as specified and as directed.

Providing & fixing false ceiling with fully perforated 12 mm thick micro tegular eged or 10 mm thic square edgd GRG false ceiling all heights with GRG (Glass fibre reinforced Gypsum) false ceiling tiles of size 595 x 595 of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO 0.5 to 0.75 as per IS 8225 : 1987, Noncombustible (Fire resistant/retardant) as per BS-476 (Part4)-1970, fire resistant/retardant and light relectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main 'T' runners of size 15 x 32 mm of length 3000 mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully thread hanger rod upto 1000 mm length and L-shape level adjuster of size 85 x 25 x 2 mm, galvanized iron parimeter wall angle of size 24 x 24 x 0.40 mm of length 3000 mm to fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawings and as per directions of Engineer-in-Charge.

Taking down cement plaster on bricks or stone walls etc., including raking out joints, hacking for key scrubing down with water etc., all as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:4) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or stone masonary in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surface of ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed.

M&L for finishing walls with textured exterior paint of required shade, new work (two or more coats) applied @ 3.28 Ltrs/10 Sqm) over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm on wall complete all as specified and directed.

M & L for preparation of new undecorated surfaces of ceiling and applying two coat of Oil Bound Distemper over a coat of primer and 2 mm thick wall care putty, all as specified and directed.

S&F in repairs 15 mm bore chromium plated cast copper alloy bib taps fancy type with flange of Cat part No 7606 of Make-Prayag or Cera/Essco complete all as specified and directed.

S&F in repairs 15 mm bore wash hand basin, brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15 mm bore concealed stop valves, cast copper alloy fancy type chromium plated with flange, long shunk & cup complete all as specified and directed.

S&F in repairs chromium plated overhead shower multiflow with shower arm 225 mm (with flange) fixed to 15 mm dia pipe complete all as specified and directed.

S&F in repairs brass chromium plated grating of size 127 mm dia all as specified and directed.

S&F CI floor trap, 75 mm outlet dia with grating including jointing to waste pipe fixed in cement type B-1 (1:2:4) complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

S&F 40 mm dia low density polythylene pipe (LDPE) of pressure rrating 6 kgf/cm2 fixed to wall with all fittings such as albow, socket etc complete all as specified and directed.

S&F in repairs brass chromium plated towel rail, 20 mm dia, D type, 60 cm long between flangees complete all as specified and directed

S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hooks including making connections and fixed in position complete in all respect as s specified and directed.

S&F cabinet mirror of size (500x400) mm of reputated make complete all as specified and directed.

S&F in repairs toilet paper holder of Chromium plated complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F in repairs two piece wall hung snow white extended with PP Seat cover and twin flush fittings of size EWC (655x365x755)mm, Cat No S1031103 P trap, comprising of cistern Cat No S1060103, campbell soft close seat cover Cat No B 1520106, twin flush fittings Cat No B 1810106 of Campbell model of Cera, or equivalent in Jaguar, Kohlar complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, size 485 mm x 370 mm x 150 mm, mount type table top, shape oval, , high quality durable ceramic series, of reputated make such as Jauar, Ceira, or other equivant make including all acessories complete all as specified.

S&F for brass CP waste coupling of size 32 mm dia WHB with long screwed shanks and fly nut fixed in repair complete all as specified.

S&F chromium plated soap dish complete all as specified and directed.

S&F brass chromium plated wall mixture, 3 in 1 system, forentine, model FLR-5281, ASIN-B, 8FBCJJ1H of Make Jaquar, fixed in 15 mm GI pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore.

All as per item No 78 here-in-before but 20 mm bore of pipes.

S & F steel water tubing medium grade, galvanised with all fittings of 15 mm bore and fixed complete to wall and ceiling or laid in floors.

S & F steel water tubing medium grade, galvanised with all fittings of 20 mm bore and fixed complete to wall and ceiling or laid in floors.

S&F fixed in repair cast iron soil, waste and vent spun pipes 100 mm bore in any length with or without ears with cement joints fixed to walls.

S&F fixed in repair cast iron soil, waste and vent spun pipes 75 mm bore in any length with or without ears with cement joints fixed to walls.

S&F in repairs spun cast iron soil 100 mm bore bends etc all as specified

S&F in repairs spun cast iron soil 75 mm bore bends etc all as specified

S&F 75 mm Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F 100 mm Cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches

S&F 75 mm Cast iron cowls

S&F 100 mm Cast iron cowls

S&F stack clams out of 50 mm by 5 mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe etc all as specified and directed complete.

S&F stack clams out of 50 mm by 5 mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof for 75 mm dia pipe etc all as specified and directed complete.

M&L for Dismantling water tanks Exc 250 & n exc 500 ltrs capacity and removing from site complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top), white colour, triple layer construction, ISI marked, hoisted & fixed in positio complete all as specified and as directed.

S&F 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms) of Make Prayag or equivalent.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store yard complete all as specified

M&L for 40 mm thick cement concrete type B-1, 1:2:4, using 20 mm grades stone aggregate as sub base of floor complete all as specified and directed.

M&L Coloured Glazed digital ceramic tiles, joint free (350 x 250) x 7 mm/ (450 x 350) x 7mm thick or as required size as in vertical surface or dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L non skid ceramic digital tiles, joint free, 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles over and including 10 mm thick plaster in CM 1:4 complete all as specified and directed..

M&L vitrified double charge/ultra charged digital ceramic coloured tiles 10 mm thick (square/ rectangular), light shade area of each tiles nexc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, shade/coloured over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 99 here-in-before, but for dado/skirting and over and including 10 mm thick cement plaster in CM 1:4 complete all as specified and directed.

M&L for providing steel scafolding & formwork etc for supporting RCC Slabs etc for carrying out the rehabilitation works complete all as specified & directed. Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of AGE (I) shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.

M&L for providing steel scafolding & formwork etc for supporting RCC Beams etc for carrying out the rehabilitation works complete all as specified & directed . Note:- The steel scaffolding & formwork etc catered for in the items above is for supporting the RCC members during the period of their structural rehabilitation. The scaffolding & formwork shall not be removed until the RCC members have gained sufficient strength. The decision of AGE (I) shall be final conslusive & binding in respect of the extent to which the formwork is to be provided & time of its removal.

Removing & Cleaning of existing loose concrete carefully by low impact high frequency hammer OR by manual chipping without damaging the existing good concrete or controlled sand blasting including cleaning the surfaces by air jet etc. complete. (Mode of measurement - breaking area of concrete)

Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc.

Makeup lost steel area due to corrosion by providing additional steel reinforcement, confirming to IS 1786:1786-2008, having a minimum yield strength of 500 N/mm2. Anchor the steel rebar in sound concrete body up to desired depth by structural GRADE pure Polyester resin based cartridge filled and applied adhesive like LockFix of FOSROC or equivalent of Dr. Fixit/BASF/ PIDILITE. Fixing of rebars is to be with pre left binding wires with existing steel at regular grid after aligning concrete profile with new mortar up to existing steel face.

Shear key connector: Drilling straight or inclined holes upto 120 mm deep and upto 14-16 mm dia on concrete using electrically operated drilling machine including fixing shear key connectors 12 mm dia fixed in concrete using LOckfix or equivalent of Dr. Fixit/BASF/ PIDILITE, etc. complete. Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications.

Supply & applying rust remover Rebakens of Fosroc (coverage- 2.0-2.5 Sqm/ltr) incl cleaning the rebars, Rebars which has not lost their life properly with mechanical means to remove the Loose rust and to achieve complete removal of dust before the application of REBAKELNS

Supply & applying Anticorrosive Treatment to Reinforcement by applying zinc rich epoxy based protective coating with Zinc Rich Epoxy coating on the dry surface of the rebars (existing and additional rebars if provided).

Drilling holes for pressure grouting of 12 mm dia., 50 to 75 mm deep in RCC structural members at the intervals of 350 mm in staggered manner or as directed by Engineer-in-charge, cleaning of holes by air blower prior to fixing nozzles, fixing Teflon perforated nozzles in RCC members in cleaned holes by applying thixotropic epoxy mortar to ensure complete sealing and cutting of nozzles by chisel after completion of grouting without damaging structural elements. Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications.

Supplying and injecting Low viscous epoxy injection resin for crack injection grouting with having Flexural strength of 40N/mm² in 7 days and Compressive strength of 45N/mm² in 1 day, by pressure and using injector with accessories till nozzles refused to accept the grout, all tools and materials complete and as directed by the Engineer-in-charge. Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications.

Providing and applying structural grade two-component solvent-free epoxy resin based bonding agent with an open time of ≥6hrs having Compressive strength strength 40N/mm² in 7 days. (Mode of measurement shall be the area of application of concrete surface). Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications.

M&L for Supply and application of single component, Shrinkage controlled, polymer modified, fiber reinforced cementitious repair mortar having compressive strength minimum 40MPa in 28 days and Flexural Strength 5MPa in 28days, for replacing the damaged part of concrete and repairing the damaged surface of concrete. The item includes cost towards all complete. Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications. (Thickness of 15mm –upto 20mm))

M&L for Supply and application of single component, Shrinkage controlled, polymer modified, fiber reinforced cementitious repair mortar having compressive strength minimum 40MPa in 28 days and Flexural Strength 5 MPa in 28 days, for replacing the damaged part of concrete and repairing the damaged surface of concrete. The item includes cost towards all complete. Application of the products shall be by manufacturer’s authorized applicator and as per manufacturer's specifications. (Thickness of more than 20 mm – upto 30 mm)

M&L for Providing and jacketing the distressed concrete elements in patches using Single component, shrinkage controlled, polymer modified cementitious micro concrete such as that achieves a compressive strength of 25 MPa in 3 days (BS 1881), Flexural Strength 09 MPa at 20 days, Tensile Strength 3 MPa in 28days as per BS 6319 Pt-7,by “Form & Pour” method inclusive of Manpower, Material and Equipment. Note:- The quoted rate shall be inclusive of providing necessary formwork all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying two or more coats of 100% permium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal registance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Material and labour for point wiring complete with PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 2.5 sqmm,1100 volts grade drawn through and including PVC conduit of suitable size at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. with necessary fixing accessories and earth continuity conductor cable of size 2.5 sqmm green colour connected to common earth and earth dolly, including pressed steel terminal boxes concealed in wall covered with modular plate for mounting switch/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for 5/15 AMps Socket outlet independent board complete all as specified and as directed. NOTE:- Cutting and chasing deemed to be included in quoted rates.

S&F Modular type Switch socket Combination 16A, 6 pin, 3 module complete all as spd and directed.

Material and labour for point wiring complete with PVC insulated, FRLS type, unsheathed, multistranded, flexible,copper conductor cable 1.5 sqmm,1100 volts grade drawn through and including PVC Casing Caping of suitable size at site with all accessories such as Tee,corner, overlaping connector etc.on surface walls, roofs and ceilings etc. with necessary fixing accessories and earth continuity conductor cable of size 1.5 sqmm green colour connected to common earth and earth dolly, including pressed steel terminal boxes concealed in wall covered with modular plate for mounting switch/ sockets/ fan regulators fixed with cadmium plated machine screws all as specified for (a) One Light/Bell/fan/Exhaust Fan point controlled by one way switch.

(b) One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sq. mm size

(c) One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq. mm size

S&F Modular switch 1 way 6A, 1 module complete all as spd and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as spd and directed.

S&F Modular Bell push 6A 1 module complete all as spd and directed.

S&F Bell, AC, 230 volts, single pole complete all as spd and directed.

S&F Modular Fan step regulator, 120W - 2 module complete all as spd and directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store (Accessories or components to be provided free for replacement by department

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Taking down fan/exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as spd and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, minimum BEE 4 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body

M/S HARI CONSTRUCTION (BID ID -3125857)

ANKIT BUILDERS (BID ID -3124740)