REPAIRS TO MES INSTALLATION UNDER GE RnD PASHAN, PUNE

Amount

Demolition of cement concrete (un-reinforced) in roof/floors other than ground level beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250metre and not exceeding 500metre from the site complete all as specified and directed.

Material and labour for 40mm thick PCC 1:2:4 Type B0 using 20 mm graded crushed stone aggregate as in levelling course on roof complete all as specified and directed.

Material and labour for rendering 10 mm thick on fair faces of concrete surface in cement mortar 1:3 for receive the roof finishes with water proofing liquid. (WPL Shall be measured and paid separately) complete all as specified and directed.

Material and labour for 3mm thick APP pre-fabricated "reinforced with polyster non woven fabric (weight not less than 150grams/sqm)" impregnated and coated on both sides with and including layer of APP modified bitumen and finished with and including micro-perforated heat fusible polythene film on both surfaces over and including 0.3 litres / Sqm bituminous primer confrming to IS-3384 and applying a coat of hot blown bitumen 85/25 grade @1.2 Kg/Sqm over the membrane and finally applying two coats of aluminium paint @ 0.10 litres / Sqm each layer complete as per manufacturer's instructions and all as specified and directed . The weight of APP membrane shall be minimum 3.5kg/Sqm and laid over and including primed surface by using LPG/Butane torch and apply uniform pressure with roller. The overlap of membrane shall be 100 mm on sides and 150mm on end laps and complete all as specified and directed. Notes: (i) The work shall be executed only through authorised applicator of manufacturer as approval by GE. (ii) Contractor has to submit guarantee of treatment for 10 Years. (iii) Rates are inclusive of cleaning the surface by roughening, sweeping clean and washing down and applying cement slurry @ 3 kgs/sqm Complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviveable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix Non skid ceramic tiles (300mm x 300mm) of 6 to 7 mm thick in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Supply and fix Glazed ceramic tiles (300mm x 200mm) of 6 to 7 mm thick, in dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including provision of 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid and bedded and pointed any cement mortar complete all as specified and directed.

Material and Labour for granite (of any type) 18 to 20mm thick as in platform of WHB or kitchen steps and similar work bedded and jointed in cement slurry over and including 15mm screed in CM 1:4 and pointed in cement with pigment to match the shade of granite complete all as specified and as directed.

Material and Labour for machine cut cudappah stone slab 20 to 25mm thick as in platform of WHB or similar work bedded and jointed in cement slurry over and including 15mm screed in CM 1:4 complete all as specified and directed.

Material and labour for Machine cut kota stone slab flooring 20mm to 25mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including provision of 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Material and labour for glossy finish rubber moulded chequered cement concrete coloured tiles 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment over and including provision of 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and pavings nexc 15cm thickness (below or above Ground level) complete all as specified and directed.

Material and Labour for PCC 1:4:8 type D2, 75mm thick using 40mm graded aggregate as in sub base complete all as specified and directed.

Material and Labour for crushed stone sand cushioning below interlocking paver block including spreading and levelling complete all as specified and directed.

Material and Labour for 60 mm thick glossy finish rubber moulded machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.

Scarifying and relaying existing loose course aggregate of size not exc 40 mm for depth n exc 15 cm and levelling course aggregate complete all as specified and directed by Engr-in-Charge.

Material and Labour for hardcore of gauge n exc 20 mm deposited spread and levelled in layers n exc 15 cm thick, watered and rammed including removal of green vegetation, roots, plants etc with suitable chemicals for inhibiting the growth of unwanted plants complete all as specified and directed.

Dismantling AC/Galvalume corrugated sheet including Ridge (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Demolition of brick work/ stone masonry/ PCC block masonry built in cement mortar or cement lime mortar including all quoins, pillars, arches etc, including ashlar facings dressed stone work and precast concrete articles complete all as specified and directed.

Material and Labour for old size bricks with fly ash bricks straight or curved on plan exc. 6m mean radius and setting in cement mortar 1:6 etc. complete all as specified as directed.

Material and Labour for pre- cast cement concrete block masonary with solid blocks of PCC 1:3:6 type C-1 exc. 10 cm in width and setting in cement mortar 1:6 etc. complete all as specified and directed.

Material and Labour for walling of random rubble, brought upto course, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed.

Extra over granite or trap stone walling granite of trap stone for hammer dressing with maximum depression not exc 40 mm from face from strainght edge to face stones and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course complete all as specified and directed.

Material and Labour for Keyed pointing in cement mortar 1:3 to random rubble masonry uncoursed or brought upto course complete all as specified and directed.

Material and Labour for 10mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even & fair complete all as specified and directed.

Taking down cement plaster on brick/concrete surfaces including racking out jointing hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for 10mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces and finished the surface even & smooth without using extra cement complete all as specified and directed.

Material and Labour for 5mm thick rendering on fair faces of concrete surfaces of ceiling in CM 1:3 finished even & smooth with out using extra cement complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embeded portion and making good disturbed ground complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

Supply and fix steel work in tublar trusses/post/rafter/purlins etc including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S. 4923-1968 grade St-240 including errection/fabrication complete all as specified and directed.

Supply and fix mild steel angle as in posts/struts in fencing including cutting, bending drilling holes, notching for wire etc, flat iron fillets for securing wire mesh etc welding including all necessary drilling bolts or revetting etc conforming to Fe- 290 Gde E-165 etc. complete all as specified and as directed.

Material and Labour for PCC 1:4:8 Type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Material and Labour for PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling fencing wire mesh/chain link any type complete all as specified and directed.

Fixing only MS galvanised chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, binding wire etc complete all as specified and directed.

Supply only MS galvanised chain link fencing any type and any gauge complete all as specified and directed.

Supply and fix round bars for fixing of chain link fencing, in required length bent to shape requried, including cranking, bending spirally for hooping etc. complete of Fe-410 W (Gde E-250 ) quality-A or Fe 290 (Gde- E -165) complete all as specified and directed.

Supply and fix Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other coveringin Fe 410-W (Gde- E- 250) quality-A . Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintle hinge or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; incl errection and fabrication also fastening and fixing complete all as specified and directed.

Supply and fix Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed .

Material and Labour for plain cement concret type B1 1:2:4 (using 20 mm graded stone aggregate) as in coping etc including necessary formwork complete all as specified and directed.

Taking down chowkhat n exc 1.5 sqm each without taking of shutter from frame complete all as specified and directed.

Supply and fix Aluminium powder coated section (minimum thickness of powder coating 50 micron) for door/window/ventilators/partition etc frames & shutters sliding or openable type including necessary joining cleats, hinges tower bolts, handles, mullion glazing clips, rubber packing anodised aluminium snap beading, screws sliding track, roller etc complete of standard sections all as specified and directed by Engr-in-Charge.

Taking down chowkhat exc 1.5 sqm and n exc 4.00 sqm each without taking of shutter from frame complete all as specified and directed.

Supply and fix Factory made solid PVC door frame of size 50 mm x 27 mm made out of 5 mm plain coloured PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed

Supply and fix 100mm butt hinges extruded aluminum alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

Supply and fix 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fix extruded Aluminium alloy handles, fabricated type anodised size 100 mm complete all as specified and directed.

Supply and fix 105X60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed.

Material and Labour for plain cement concrete Type C1, 1:3:6 ( using 20 mm graded aggregate) for filling of hollow pressed steel frame complete all as specified and directed.

Supply and fix 25 x 3mm flat iron hold fast conforming to Fe 290, Gde -E-165 complete all as specified and directed.

Material and Labour for plain cement concrete Type B-0 1:2:4 ( using 12.5 mm graded stone aggregates) for fixing hold fast including repairing of disturbed plaster ( while taking down Door/window,ventilator frame) and matching the repaired surface with existing one complete all as specified and directed.

Supply and fix 30mm thick factory made flush shutters, solid, core construction with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fix 150 mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 150 mm extruded aluminium alloy handles, fabricated type, anodised and fixed complete all as specified and directed.

Supply and fix 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed, complete all as specified and directed.

Supply and fix Aluminium floor door stopper double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base size 150mm fixed with door shutter with screws at appropriate height complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads etc complete all as specified and directed.

Supply and fix 4mm thick Sheet glass,ordinary quality and glazing with oil putty insquare n exc 0.5 sq. m in each pane etc complete all as specified and directed.

Supply and fix in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apeture 1.40 mm and fixed with stainless steel wire staples etc, complete all as directed.

Supply and fix in repairs 100mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

Supply and fix in repairs 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix in repairs 150 mm extruded Aluminium alloy handles, fabricated type anodised complete all as specified and directed.

Supply and fix in repairs aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolt and sliding bolt of extruded sections or cast aluminium alloy length of bolt 300mm complete all as specified and directed.

Supply and fix in repairs aluminium door stopper of size 150 mm long double legged fixed to bottom rail of door shutter provided with rubber bushing at one end to stop the door at floor and other end provided with aluminium plate base fixed with door shutter with screws at appropriate height complete all as specified and directed.

Supply and fix in repairs vitreous china water closet squatting pan 'orissa pattern, white coloured of size 580 x 440 mm, with integral foot rest and outlet for 'P' or 'S' trap , WC pan shall be set in lean concrete below level of rim of pan to receive the floor finish complete all as specified and directed.

Supply and fix in repairs PVC valveless syphonic action type flushing cistern 10ltrs capacity low level, white with inlet ball valve, float and handle including brackets flush pipe of polythene of low or high density of PVC 32mm dia for low level cistern complete all as specified and directed.

Supply and fix vitreous china wash basin white colour flat back size 550 x 400mm including brackets and fixed in repairs complete all as specified and directed.

Supply and fix in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Supply and fix Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

Supply and fix in repairs Concussive push button taps of CP cast copper alloy ,screwed for iron pipe size 15mm complete all as specified and directed.

Supply and fix in repairs angle stop cock chromium plated screwed for iron pipe or brass ferrule, 15 mm bore and fixed complete all as specified and directed.

Supply and fix in repairs Pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, 15mm dia of pipe, complete all as specified and directed.

Supply and fix in repairs 15mm bore fancy type chromium plated bib taps with crutch or butterfly handle screwed down for iron pipes complete all as specified and directed.

Supply and fix in repair 32mm bore waste fittings, brass chromium plated for glazed sinks, WHBs etc, with long screwed shanks and forming flange and bedded in red lead cement and other end fixed complete all as specified and directed.

Supply and fix in repair 15mm bore PVC connection with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fix in repairs brass chromium plated shower rose 125mm size complete all as specified and directed.

Dismantling and breakingup drain pipes AC /CI /PVC of any size complete all as specified and directed.

Supply and fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length with rubberring joints fixed to walls or floor 75mm bore complete all as specified and directed.

Supply and fix 500 Ltrs capacity rotational moulded polythene water storage tank ISI marked (cylindrical vertical with closed top) triple layered hoisted and fixed in position including dismantling old tanks complete all as specified and directed.

Supply and fix in repairs 20mm bore ball brass valve, high pressure with polythene float & fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

Supply and fix in repairs 20mm bore Gun metal gate valve with iron wheel head screwed both end for iron pipe complete all as specified and directed.

Taking up or down 15mm bore steel water tubing & connections and removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing & connections and removal to store complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanised steel tube with necessary fitting and fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

Supply and fix 20 mm bore medium grade galvanised steel tube with necessary fitting and fixed complete to walls or ceiling & laid in floors complete all as specified and directed.

Supply and fix 110mm bore P.V.C (S.W.R) bend complete all as specified and directed.

Supply and fix 110mm bore P.V.C (S.W.R) single Tee junction equal or unequal complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) branch piece, single `Y’ equal or un equal complete all as specified and directed.

Supply and fix PVC floor trap 75 mm dia with gratings complete all as specified and directed.

Supply and fix 75mm bore P.V.C (S.W.R) bend complete all as specified and directed.

Supply and fix in repair towel rail 600 mm long brass Chromium plated 20 mm dia fixed to wall etc complete all as specified and directed.

Taking down old unservicable rolling shutter of any size complete all as specified and directed.

Supply and fix Steel rolling shutters 1.00 mm thickness of laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete: push pull or manual type complete all as specified and directed

Supply and fix steel rolling shutters 1.00 mm thickness of laths, without ball bearing, as specified including top covers, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, gear operated type with bevel gear box and crank handle complete all as specified and directed.

Material and Labour for preperation of new steel surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preperation of new steel surfaces and painting two coats with synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and directed.

Material and Labour for preperation of old painted steel surface and painting two coats with synthetic enamel paint over a coat of red oxide primer on old steel surfaces of any description over 10cm width or girth including preparation of surfaces complete all as specified and directed.

Material and Labour for Preparation of new or previously un treated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preperation of newly plastered surface and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

Material and Labour for two coats of Aluminium painting over a coat of aluminium red oxideprimer including preparation of steel surface over 10 cm width or girth complete all as specified and directed.

Material and Labour for preparation of newly plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of alkali resistent primer complete all as specified nad directed.

Material and Labour for complete removal of existing treatment on wall and applying two coats distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and Labour for complete removal of existing treatment on wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Suraj Sukhdev More (BID ID -3099073)

VIRENDRA FABRICATORS (BID ID -3110109)

AJAY ENTERPRISES (BID ID -3101274)

OM GANESH CONSTRUCTION (BID ID -3112351)

M/S SAMRUDHI CONSTRUCTION (BID ID -3106538)

S.K.HARAL (BID ID -3100918)

sanjay m. suryawanshi (BID ID -3102797)