Reinvited for Upgradation of Primary Health Centre into Health and Wellness Centre at Village Kharawar in Rohtak

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing. (b) In cement. (HSR 8.5 (b)

Scraping. (c) Cement plaster. (HSR 8.32 (c)

Dismantling white or coloured glazed tiles (to be carefylly removed). (HSR 8.38)

Removing door and windows (wood and steel) with chowkats by making Recesses in walls when the wall is not to be dismantled:- (HSR 8.18)

Windows

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. (HSR 11.7)

Terracing consisting of tiles 22.86cm x 11.43cm x 3.81cm, laid over 87.50mm mud filling on a layer of 25mm mud plaster and another layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg per Sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Providing & fixing ceramic tiles/ anti skid tile of size 400mm x 400mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note: - Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO. (HSR 14.91) Note:- The Agency to whom the work is allotted will have to produce original bill/voucher for all quantity in token of proof of purchase of material.

Providing & fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (b) Size of ceramic Glazed Tiles 300 x 450mm of reputed manufacturer like: - RAK, NITCO, KAJARIA shall be used as approved by Engineer-in-charge. (HSR 14.92 (b) Note: - The agency to whom the work is allotted will have to produce original bill/ voucher for all quantity in token of proof of purchase of material.

12mm thick cement plaster 1:6. (HSR 15.7)

15mm thick cement plaster 1:6 on the rough side of single of half brick wall. (HSR 15.12)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1)

Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (Note:- First quality paint/primer of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) 1st quality Paint (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge) 1st quality Paint (HSR 16.3)

Painting two coats with synthetic enamel Paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge).1st quality Paint (HSR 16.5)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (HSR 16.58)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint. (Note:- First quality paint of reputed make firm such as Goodlass-Nerolac, Berger, Garware, Jenson, Nicholson, Asian & Shalimar Shall be used as approved by Engineer-in-charge in writing, Drum of paint shall be opened in presence of Engineer-in-charge). (b) 1st Quality. (HSR 16.79 (b)

Providing and applying two coats white cement based putty over plastered surface and grindling the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete. (Note:- reputed make Putty such as J.K./ Birla shall be used as approved by Engineer-in-charge). (HSR 16.81)

Factory manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash etc. (non coniferous timber other teak, conforming to IS specification No. 1003, kiln seasoned) with 100mm wide vertical styles 150mm wide lock rail 200mm wide bottom rail and wire gauze of 140G or 120G designation including cost of iron hinges, screws, chock/cleats, stops nails etc., complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (styler and rails of windows shutters shall be 75mm wide). (a) 30mm thick. (HSR 17.92 (a) - Note 17.18 (i)

Factory manufactured solid flush door shutters, with block board core as per IS 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot pressed, confirming to IS 2202 part I and II, fixed in position, including iron hinges, screws, chocks/ cleats and stops, etc (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position. (a) commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (iii) 35mm thick. (HSR 17.93 (a) (iii)- Note 17.18 (i)

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:- (a) door and window frame of size 89mm x 50mm with 40mm wide single rebate. (HSR 18.34 (a)

door and window frame of size 114mm x 50mm with 35mm wide double rebate.

NS items

Providing & laying required size of glazed tiles with DESIGN PRINTED for display of Logo (Satinfinish) in dado set in CM 1:3 with joints so as to form a true & even surface and joints finished neatly with white cement mixed with matching pigments all complete as directed. (Rate should include base plastering with CM 1:5 of required thickness). The rate shall include cost of customized printing at top of the tile all complete as the details given by National Health Mission Haryana/ HLL directed. (Kindly refer tender documents for Design details).

Providing & laying required size of glazed tiles with DESIGN PRINTED for Windows & Door Borders (Satin finish) in dado set in CM 1:3 with joints so as to form a true & even surface and joints finished neatly with white cement mixed with matching pigments all complete as directed. (Rate should base plastering with CM 1:5 of required thickness). The rate shall include cost of customized printing at top of the tile all complete as the details given by National Health Mission Haryana/ HLL directed. (Kindly refer tender documents for Design details).

PH items

Providing & fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal Work - Exposed on Wall. (ii) 20 mm internal diameter of pipeline. (DSR 18.10)

15 mm internal diameter pipe line

Dismantling, disjointing, removal and carriage to stores G.I. Pipe-lines, specials valves and fittings:- (b) 20 mm internal diameter pipe line. (HSR 28.48 (b)

15 mm internal diameter pipe line

Providing and fixing in position best Indian make (to the approval of the Engineer-in-charge). Indian type Orissa or Orya water closet suite for Sinking into floor, with raised foot treads complete with 100mm H.C.I, ‘P’ Trap with or without vent as required and all other necessary fittings as fully described in item no.30.1 above. (a) Size 580mm. (i) White. (HSR 30.2 (a) (i)

Providing and fixing in position best Indian make (as approved by the Engineer-in-charge) European type water closet suite, Syphonic type, Consisting of- (i) Vitreous chinaware Syphonic Suite with 15 litres capacity matching chinaware cistern and all internal brass fittings complete with ‘P’ or ‘S’ trap with or without vent (as approved by the Engineer-in-charge). (ii) One piece Seat and lid in hollow black or white plastic fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge). complete in all respects including cutting and making good the walls and floors. (a) Single trap symphonic W.C. Suite. (i) White. (HSR 30.5 (a) (i)

Extra over item nos. 30.1 to 30.4 and 30.6 for providing and fixing 15 litres capacity C.I. low level vitreous chinaware cistern complete with flush bend all other necessary Fittings instead of C.I high level cistern complete with fittings. (i) White. (HSR 30.12 (i)

Extra over item nos. 30.3 to 30.6 for providing and fixing best Indian make plastic Hygenic seat with lid complete instead of hollow Black or white plaster seat and lid. (i) White plastic seat (Solid). (HSR 30.13 (i)

Extra for providing and fixing 32mm dia G.I./C.P flush pipe complete with accessories instead of 32/mm dia galvanized telescopic flush pipe with clips (as required by the Engineer-in-charge). (a) 32mm dia G.I. flush pipe. (HSR 30.15 (a)

Providing and fixing in position best Indian make towel rails fixed in with rawlslugs embedded in walls with C.P brass screws complete in all respect including cutting and making good the walls etc. (a) 25mm dia C.P brass adjustable. (ii) 600mm long. (HSR 30.68 (a) (ii)

Providing and fixing in position best Indian make bevelled edge 5.5mm thick Mirror mounted on Asbestos sheet ground fixed in position by means of 4 Nos. chormium plated brass screws and washers over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) complete including cutting and making good the walls etc. (a) Indian make. (i) 600mm x 450mm. (HSR 30.71 (a) (i)

Providing and fixing in position 15mm i/d C.P brass bib Cocks of best quality (as required by the Engineer-in-charge). (a) Bib cock long body. (HSR 30.75 (a)

Bib cock.

Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge). (a) 15mm stop cock. (i) Stop cock male and female end. (HSR 30.76 (a) (i)

Providing and fixing HDPE Water Storage Tanks of Sintex, Diplast, O.K. supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respect to the satisfaction of Engineer-in-Charge. (except civil work). (c) 500 Ltr. Capacity. (HSR 30.119 (c)

1000 Ltr. Capacity.