Construction of 01 no 132 KV bay for 132 KV Pipri Hydel-Renukoot TSS D/C line at 132 KV Substation Pipri Hydel on Deposit Basis under ETD, Robertsganj.

[A] Supply

145 KV CB clamp pad for Double moose conductor.

145 KV LI clamp pad for Double moose conductor.

145 KV BI clamp pad for Double moose conductor.

145 kv Post insulator clamp for Double moose

CT TERMINAL CONNECTOR for DOUBLE MOOSE

145 kv PT/ SURGE ARRESTER TERMINAL CONNECTOR

Single suspension fittings PANTHER

Bolted type tension fitting without turn buckle MOOSE

Bolted type tension fitting with turn buckle MOOSE

PG Clamp (panther to panther)

PG Clamp (panther to moose)

PG Clamp (copper/moose to moose) special type as per sample

MS FLAT(75X10mm)

MS FLAT(50X6mm)

MS FLAT(25X6mm)

40mm MS Rod for Earthmat

40 mm MS Rod Electrode

Spilit Air Conditioner 2 Ton (Hitachi/O-General/Daikin or equivalment make) complete with all accessories and steblizer with installation

[B] Work

Complete erection & commissioning of following equipments as per instruction manual of various equipments and technical specification of UPPTCL including shifting of materials/equipments from store to erection site and including all other associated work to complete the work.

145KV SF6 Circuit Breaker

145KV Current Transformer with Junction Boxes

145KV Potential Transformer with Junction Boxes

145KV Line Isolators with one Earth Switch (Motorised)

145KV Bus Isolators without Earth Switch (Motorised)

120KV Surge Arrestors

132KV Relay Panel

132 KV Double Feeder Control Panel

shield wire erection/stringing

Laying & termination of following size of control cable in cable trench as per specification including carriage of cable drum from store to site and shifting back to store and all tther associated works to complete the job satisfactory as per technical specification

2 core x 2.5 sq.mm armoured copper control cable

4 core x 2.5 sq.mm unarmoured copper control cable

6 core x 2.5 sq.mm unarmoured copper control cable

10 core x 2.5 sq.mm unarmoured copper control cable

Erection of lattice type main and auxillary structures. (132 kv column ATM- 2, 132 kv AXM- Beam -4 , APR/132 kv peak ,132 kv BBL/isolator LI-1& BI-2, BCT/CT/PT-6 ,ALP/LA-3 etc.)

Earthing of various equipment with MS Flat by using.

75x10 mm MS Flat

50x6 mm MS Flat

25x6 mm MS Flat

Painting of newely erected MS Flat following with 01 coat red oxide and 02 coat with lus green ISI mark paint complete with its MS Flat & vertical support

MS Flat 50x6 mm

MS Flat 75x6 mm

MS Flat 25x6 mm

Laying of MS round 40mm dia including cutting straightning and laying in trenches at the depth of 800mm below ground level including lap/cross jointing by MS welding electrodes and 50x50x6mm 10mm MS angle . Painting joints with bituminus including excavatin and back filling etc. as per specification of laying earth mat given by engineers of work (MS round shall be provided by department free of cost)

Metering cubicle for ABT Energy meter along with 2 nos. ABT meter.

Installation of AC with all accessories and stablizer.

Jumpering interconnection of equipments through verious ACSR conductor of various 132kv equipment (CB/PT/CT/LA/BSI/LSI/JACK BUS/MAIN BUS etc ) with ACSR Moose conductor . The work include cutting of conductor , bending in proper shape , clamping and other associated work to complete the job for the bay satisfactory . ( 1 job including 3 phase jumper 132kv complete bay )

Extension of Main bus jack bus ,trasnfer bus of existing bus including hardware fittings insatllation.

Modification of the ATM gantry as per existing gantry satus including cutting , bending and fixing painting .

carriage of structure from efu naini including loading and unloading.

Carriage of material like CT/PT,Breker etc from different Substation under ETD-Robertsganj to site loading and unloading.