Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹75,300
Closing Date
18 Sept 2024, 10:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
J PRAKASH
Rennovation of Kitchen, Providing inside and outside painting, rennovation of toilets, polishing, water proofing, providing wardrobes, mosquito mesh, puff sheet, rennovation of servent room in Government Quarters No. B6 (Vice chairman of karnataka state guarantee implementation authority) at Jayamahal extension bangalore
PWD/2024-25/BD/WORK_INDENT14567
PWD/2024-25/BD/WORK_INDENT14567
Open
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
4 documents required · 4 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years (i.e. 2019-20 to 2023-24 ), (b) Satisfactory completion as prime contractor any works to an extent of 50% of the cost of the work i.e. Rs 18.80 Lakhs.
3.6 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity - (AxNx2.5 - B), Where, A - Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress, N - Number of years prescribed for completion of the works for which tenders are invited 3 month, B - Value, at 2024-25 price level, of existing commitments and on-going works to be completed during the next 3 month, Note :The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2019-20 to 2023-24 (a)Achieved in at least ONE financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 37.60 lakhs
nil
nil
nil
nil
nil
nil
nil
nil
nil
nil
nil
nil
₹950
₹75,300
11 Sept 2024
11 Sept 2024
19 Sept 2024
13 Sept 2024
Providing internal painting, Providing Polishing and Repairs to wooden doors and windows, Providing external painting and painting to grills, Providing UPVC windows and Gypsum ceiling,Providing kitchen cabinets and repairing wardrobes, Rennovation of Bathrooms and other improvement works to B Type Quarters b-6 at Jayamahal Extension, Bangalore.
Removing white wash or colour wash by steel brushing and I or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complet...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoot...
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...
Finishing walls with Premium Acrylic Smooth exterior paint of required shade : Old work (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surface after th...
Removing the old paint or polish from wood and / or wood based surface with paint remover of approved brand / manufacturer and making surface even including cost of materials, labour, complete as per ...
Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is...
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One coats on old work as per specifications and as per directions of Engineer in charge...
Providing and laying Autoclaved Aerated Cement blocks masonry with 100 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level in cement ...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, w...
Providing venyl flooring of approved quality and make 2mm thick fixed on the top of existing wooden flooring fixed with suitable adhesive, including cutting to the required size and fixing etc., compl...
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. as pe...
Polyurethane based Single Component for Existing Surface: Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU di...
Providing and supplying Kitchen cabinet with 19mm thick one side Architect recommended decorative Acrylic Glossy or Matt finished laminate (1.5mm thick) and other side balancing lamination(preferably ...
Providing and supplying cupboard shutter with 18mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) HDHMR BOARD of approved br...
Providing and supplying 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. ...
Labour & installation charges for BWP ply:BWR ply:HDHMR: MDF & Particle board work of any thickness applicable for all types of work.(I. No.22.8 Pg. No-218 of PWD, Vol-2 SR 2023-24)
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle r...
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Enginee...
Providing and fixing Stainless Steel 304 grade soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including maki...
Providing and fixing stainless steel 304 grade fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in- charge. 100 mm length (I. No.22.9c Pg. No-2...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with...
Kitchen sink with drain board: 510x1040 mm bowl depth 250 mm(I. No.14.10.1.1 Pg. No-133 of PWD, Vol-2 SR 2023-24)
Providing and fixing 6mm Clear/opal white/solar bronze/blue/green tinted Multi wall poly carbonate sheet for Tubular structure. The work including cost of all materials, labour charges and usage charg...
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 g/m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy prim...
Providing & fixing corrugated G.S. sheet roofing including vertical I curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet was...
Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25...
Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to dumping ground to the appropriate disposal area as per direction of Engin...
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.(I. No 19.2.1 Pg. No-186 of PWD, Vol-...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) including rounding off corners wherever requir...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost of materials, labour, cur...
Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...
Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...
Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as ...
Removing of existing old or broken wash basin / urinals/ Indian Water closet/ European Water closet and disposing it with all cost and conveyance labour for all items of work, HOM with all lead and li...
Providing and fixing Jaguar make single moulded English water closet of approved make with P or S trap with low level cistern of china clay tank and with 3.20 cms flush pipe double flapped plastic sea...
Providing and fixing water closet squatting pan (Indian type W C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white PVC. flushing cistern, including flush pipe, with man...
Supplying and fixing jaguar make wash hand basin (Code No.40801- FNG) with half pedestal including providing waste coupling, waste pipe, angle cock, connection pipe, all are concealed, waste pipe, ang...
Providing and fixing Wall Mixer Telephonic with L Shaped tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Clas...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(I. No 14.55b Pg. No-139 of PWD, Vol-...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expan...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Supplying and fixing Jaguar make Health Facet with 1.00m flexible aluminium coated tube and hook including necessary screws, accessories etc., etc., complete. The rate including necessary threads, w...
Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(I. No 14.89b Pg. No-144 of PWD, Vol-2 ...
Providing and fixing Towel rail (Circular) made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(I. No 14.86b Pg. No-144 of PWD, Vol-2 SR...
Cleaning of Glazed tiles using floors and surface cleaners Non corrosive with chemicals Hydrochloric acid, Butyl oleytamine and others which are water soluble and capable of removing hard and soft sta...
Providing and fixing Soap dish wired with 200mm width made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium(I. No 14.92b Pg. No-145 of P...
Providing and fixing German Polyamide flexible connection hose with winged nuts 450mm with all concealed fitting arrangements & all necessary accesories complete - Class Premium (VOL-2 SR ITEM NO. 14...
Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(I. No 14.48b Pg. No-138 of PWD, Vol-2 SR 2023-24)
Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(I. No...
Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Premium(I. No 14.54b Pg. No-139 of PWD, Vo...
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter.(I. No.13.9.1 Pg. No-118 of PWD, Vol-2 SR 2023-24)
Providing and fixing curtain rods of size 25mm dia stainless steel of heavy gauge pipe with stainless steel end brackets and stainless steel supporting couble brackets and L-brackets whereever nec...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge SS Aldrop 16mm dia, 200mm(I. No.22.15.3 Pg. No-218 of PWD, Vol-2 SR 2023-24)
Repair to existing ply wood ward-robes with 19mm plywood, beading,laminate and all necessary including cost of materials labour, lead,lift complete as per specifications.(I. No.20.113 Pg. No-208 of ...
Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards.(I. No.20.104 Pg. No-207 of PWD, Vol-2 SR 2023-24)
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. : 40mm(I. No.12.77.1 Pg. No-107 o...
Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all d...
Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Providing general disinfection services, spraying of insecticide and pesticide inside and outside the building flies, bedbugs,lizards, cockroaches, spiders caterpillars etc., including cost of mate...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete ...
Manufacturing supplying and fixing wooden ward robe of 0.60m deep using 25mm thick waater proof block board for shutter and 19mm plywood for allround ward robe, openable shutters with 25mmx6mm thick p...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram...
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 5.5 mm thick glass panes including cost of materials, labour, u...
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete(I. No.20.28 Pg. No-104 of PWD, Vol-2 SR 2023-2...
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as a...
Repairs to plaster in patches of 2.5 m2 and less in walls, .s 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including dis...
UGT/OHT (inside) waterproofing with Anti-microbial Coating Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae, a...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plug...
Providing and fixing stainless steel Fixtures conforming to 304 graded steel as per direction of engineer in charge: SS hinges 100 mm(I. No.22.15.9 Pg. No-219 of PWD, Vol-2 SR 2023-24)
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
b-6.docx
Tender Document • 1.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .