Estimate for Upgradation of Ravidas Park in Shri Nagar Colony in Ward no 19, M.C Rohtak (re-call)

Amount

Submersible Pump

Analysis of Rate for Providing and Fixing of Chain Swing

Analysis of Rate for Providing and Fixing of Slide Ladder

Leg press (BOTH SIDE) 90 x20x75 inches Equipment made to meet EN 16630 ,Epoxy coating of 100 microns GI main post-of:114 mm Dia Pipe thk. - 3.5 - 7.5mm Self-lubricating German bearing and Reinforced foot pedals for extended life Non fading LLDPE and open ends of the pipe closed by GULLDPE caps High tensile steel with galvanized nut bolts are used for assembly. Self Explanatory stainless steel label fixed on equipment for ease of use. foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

SHOULDER BUILDER DIMENSIONS: - 0.9M (L) x 0.9M (W) x 1.580M (H). Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB.100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter and 10mm thickness. The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB”B”or “B” class welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 1.2 mm thickness and 20mm x 40mm CRC square pipe of 1.2mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25 mm of bright material. The bearing used is “6201zz” and “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob. The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

HORSE RIDER DIMENSIONS: - 1.18M (L) x 0.4M (W) x 1.4m (H). Horse rider equipment made from “B” class G.I. 100NB made from “B” Class G.I. pipes welded with M.S. round plate of Ø250 mm and 10mm thick Seat provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. The leg movement frame is of 32NB made from “B” G.I. pipe. The handle frame is of 32 NB made from “B” Class G.I. pipe. The footrests are made from 25 NB “B” class G.I. pipe. Pins used of Diameter 17 mm are made up from bright material. The bearings used are “6203 ZZ” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The circlips used for assembly are of A24 mm. The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

CROSS TRAINER DIMENSIONS: - 1.32M (L) x 0.6M (W) x 1.75M. (H). Cross trainer equipment made from “B” Class G.I. Pipe of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. of M.S. round plate of Ø250 mm and 10mm thick. The Handle Frame is made up of 25NB “B” Class G.I. Pipe. M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from bright material. The Bearings used are of “6007” , “6205” and with 150 x 150 x 5 mm MS plate for nut bolting with stand. Powder coated 40 microns fixed in foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

CHEST PRESS DIMENSIONS: - 2M (L) x 0.71M (W) x 2.15M. (H). Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The centerpipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm and 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0 The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

Bidder Name

Amount

Yaman Construction Company (GSTN-NA) BID ID -1181879

The Star Builders Co-op L&C Society (GSTN-NA) BID ID -1181765

The KBC Co-Operative L&C Society Ltd. (GSTN-NA) BID ID -1181804

The BB Co-op L&C Society Ltd. (GSTN-NA) BID ID -1181901

CROISSANCE CONSTRUCTIONS (GSTN-NA) BID ID -1181918

The BB Co-op L&C Society Ltd. (BID ID -1181901)

Yaman Construction Company (BID ID -1181879)

The Star Builders Co-op L&C Society (BID ID -1181765)

The KBC Co-Operative L&C Society Ltd. (BID ID -1181804)

The KBC Co-Operative L&C Society Ltd. (BID ID -1181804)

CROISSANCE CONSTRUCTIONS (BID ID -1181918)

Yaman Construction Company (BID ID -1181879)

The BB Co-op L&C Society Ltd. (BID ID -1181901)