REPAIR TO SECURITY WALL, BOUNDRY WALL AND FENCING OF AREA II UNDER AGE (B/R) CENTRAL AT GE(W) COLABA, MUMBAI.

Amount

Demolition of brickwork or stone boulders masonry built in cement morter including all quins, arches, pillers all as specified and directed.

M&L for brick work with Sub class 'B' bricks, straight or curved on plan exc 6 metre mean radius built in CM (1:6) all as specified and directed.

M&L for brick work with Sub class 'B' bricks, straight or curved on plan exc 6 metre mean radius built in CM (1:4) all as specified and directed.

M&L for brick work with Sub class 'B' bricks, straight or curved in plan of any redius in half brick thick wall built in CM (1:4) all as specified and directed.

M&L pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (using 20 mm graded crushed stone aggregate) exc. 10 cm in width and setting in CM (1:6) all as specified and directed by engr in charge.

M&L pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (using 20 mm graded crushed stone aggregate) exc. 10 cm in width and setting in CM (1:4) all as specified and directed by engr in charge.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick wall or stone surfaces in cement mortar 1:4, finished surfaces even and smooth without using extra cement all as specified and directed.

M&L for preparing new surfaces of walls and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings all as specified and directed.

M&L for preparing old surfaces of walls and applying one coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of alkali resistent primer through authorized applicator only including use of scaffoldings all as specified and directed.

Demolition of reinforced Concrete of any description and in any position not otherwise described all as specified and directed.

S&F for providing precast cement concrete type C1, 1:3:6 (using 20 mm graded crushed stone aggregate) set in CM 1:6 in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar complete with joints to match all as specified and directed.

S&F precast cement concrete 1:2:4, type B1 (using 20 mm graded crushed stone aggregate), set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces with joints to match all as specified and directed.

M&L PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for water troughs and the like including weathering, slightly rounded or chamfered angles and throating all as specified and directed.

S&F precast cement concrete 1:2:4, type B0 (using 12.5 mm graded crushed stone aggregate), set in CM 1:4 louvres and jallies, 25mm thick (measured solid), in cluding all mouldings but excluding frame (Pre cast frame shall be measured separately all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise described all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.

Dismantling roof (corrugated, semi corrugated etc) sheets in roof coverings including ridges described all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance not exc 50m and making good surface described all as specified and directed.

M&L PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) in foundations, filling and mass concrete including sub base of floors described all as specified and directed.

S&F rolled mild steel sections conforming to Gde Fe-290(Gde-165-E) as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates described all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws described all as specified and directed.

M&L for preparation of new untreated steel surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Dismantling fencing wire mesh any type and any description all as specified and directed.

Fixing only chain link fencing including line wires, of any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire all as specified and directed.

Supply only chain link mild steel galvanized fencing, any type or size all as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified and directed.

S&F in repairs Galvanised, concertina coil of 610 mm dia made of 0.5 mm thick 19 mm wide strip and 2.59 mm dia high tensile wire 125 Nos of clips having 50 Nos of circle and covering 6 running metres and 5 clips per spiral using a centar core of high tensile wire around which a tape of rezor sharp barbes machine crimped all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate ) as in plinth protection & similar works including necessary expansion joint filling with bitumen at a certain distance all as specified and directed.

M&L preparing old painted brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of floor coat emulsion paint all as specified and directed.

M&L preparing new plaster, brick or concrete surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of floor coat emulsion paint over a coat of priming paints all as specified and directed.

S&F in repairs stainless steel (Grade 304) railing, newal post, ends, caps and balustars made of hollow tubes, channels, plates including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and directed by Engr in Charge.

Demolition of cement concrete (Unreinforced) in ground floor & pavings n.exc 15 cm thickness (below or above GL) and removing debries out side MOD land all as specified and directed.

M&L sub base 100 mm thick PCC 1: 4 : 8, type D2 ( using 40 mm graded crushed stone aggregate) all as specified and directed.

M&L machine pressed precast concrete interlocking paver block glossy finish any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M- 35 grade with grey cement and pigment including 40 mm thick sand cushioning layer all as directed and specified

Dismantling of floor hearth or wall tiles including cement mortar bedding (but not backing) and removing serviceable tiles and removing debris out of MD land all as specified and directed.

S&F chequered cement concrete tiles 20cm x 20cm x 25mm thick laid on CM 1:6 bedding layer of 15 mm thick with grey pigment all as specified and directed.

SHREE JAGDISH FURNITURE CO. (BID ID -3073724)

BAJAJ CONSTRUCTION (BID ID -3079732)

SHRI SAI ENTERPRISES (BID ID -3075144)

Bright Construction Co (BID ID -3079698)

sunenterprises (BID ID -3069851)

Bidder Name

SHRI SAI ENTERPRISES

vikas construction

Bright Construction Co

SHREE JAGDISH FURNITURE CO.

BAJAJ CONSTRUCTION

sunenterprises