Under the financial year 2025-26 Track Improvement and Road safety work of various Kanwar Routes in District Baghpat.

Renewing patries 1.50 metere wide including dressing surface filling upto 8 cm (3") depth and making namunas, at every 15 metre apart on either side of the road true to patri template with side slopes of 1:2 etc. trenches for taking the earth to be so dug that they form a continuous side drain at road boundary. S.I. No. 764 A. Including supply of all Material, Labour, T&P etc labour cess, royalty and all other applicable Taxes required for proper completion of work as directed by Engineer in charge but excluding GST.

Barricading of two rows with wooden ballies of height of 5 to 6 feets above the ground level & diameter 10 to 15 cm which is embedded 45 cm below the ground level. (kachcha) SOR VVIP SI.No. 25b. Including supply of all Material, Labour, T&P etc labour cess, royalty and all other applicable Taxes required for proper completion of work as directed by Engineer in charge but excluding GST.

Brick soling with strainght over burnt bricks laid edge and dry with brick edging on both sides including preparation of subgrade to prescribed camber and including supply of bricks, filling joints with local earth of P.I. 5 to 7, spreading blinding coat 1 cm (3/8") depth of local earth over the entire surface and including supply of all materials, labour Tools & Plants etc. required for proper completion of the work. SI.No. 762b. Including supply of all Material, Labour, T&P etc labour cess, royalty and all other applicable Taxes required for proper completion of work as directed by Engineer in charge but excluding GST.

Water Bound Macadam Grading - 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up to interstices of coarse aggregate, watering and compacting to the required density Grading III as per Techincal Specification Clause 405 3b. Including supply of all Material Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge.

Providing and applying tack coat with bitumen VG-10 grade using pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. Including supply of all Material Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. Technical Specificaton Clasue (SI.NO. 503 II).

Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using VG-10 Bitumen required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheele 80-100 kn static roller capacity, finished to required level and grades to be followed by Type-C seal coat. Including supply of all Material Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. as per Technical Specification Clause. 508.

Providing and laying Type-C seal coat with VG-10 bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C. I Including supply of all Material Labour, T&P etc also including labour cess, royalty and all other applicable Taxes (But excluding GST) required for proper completion of work as per direction of Engineer-in-charge. as per technical specification clause 510.

Please Enable Macros to View BoQ information