REPAIR/MAINT OF SUBMERSIBLE PUMP SETS LT PANEL WIRELESS WATER LEVEL INDICATOR AND OTHE MISC WORKS IN PUMP HOUSE IN DOMESTIC AREA AT AFS CHAKERI KANPUR

Amount

Reapir/Maint of LT panel of any size/type, cleaning inside /outside and around the panel, checking and tightening of all incoming and outgoing connections by replacing aluminium lugs, pieces of burnt wires of existing size as required to make it functional complete all as specified and as directed.

S&F in replacement of Power contactor three phase 415 volt, 50 Hz, 70 A, AC3 and 100 A, AC1 type ML4 suitable for 50 HP complete all as specified and as directed. Make:- L&T / BCH / Siemens / Legrand"

"S&F in replacement of Power contactor three phase 415 volt, 50 Hz, 32 A, AC3 type ML3 suitable for 30 HP complete all as specified and as directed. Make:- L&T / BCH / Siemens / Legrand"

"S&F in replacement of Power contactor three phase 415 volt, 50 Hz, type ML2 suitable for 20 HP complete all as specified and as directed. Make:- L&T / BCH / Siemens / Legrand"

"S&F in replacement of Over load relay range suitable for 7.5 HP to 45 HP pump set complete all as specified and as directed. Make:- L&T / BCH / Siemens / Legrand"

Taking out / Lifting of defective submersible pump set of 45/30/20 HP capacity from bore well including motor, column pipes upto 150 mm dia, steel rope, submersible cable and accessories etc and depositing in AGE E/M store yard complete all as specified and as directed.

All as per item No. 6.00 but submersible pump set of 15/12.5/7.5 HP capacity complete all as specified and as directed.

All as per item No 6.00 above but submersible pump set of 2.5/2 HP capacity complete all as specified and as directed.

Lowering only submersible pump set of 45/30/20 HP along with motor, column pipes, steel rope, submersible cable and accessories etc after repairing including testing commissioning of submersible pump set complete all as specified and as directed.

All as per item No. 9 but submersible pump set of 15/12.5/7.5 HP capacity complete all as specified and as directed.

All as per item No 9 above but submersible pump set of 2.5/2 HP capacity complete all as specified and as directed. Note for item No 9, 10 & 11:- All spares required to make the motor, pumps, column pipe etc serviceable shall be measured and paid separately under relevent items of BOQ as supply only including transportation to and from upto contractor workshop."

Dismantling of pump motor set 7.5 to 45 HP complete, (Taken out under above item / lying U/S in store yard of AGE E/M) cleaning all dismantled spares parts / winding for inspection of Engineer-in-Charge to ascertian the scope of work for repair / replacement of parts complete all as specified and as directed. Note :- Spare parts shall be measured and paid separately under respective item of BOQ. Pump motor set shall be recorded in MB with indicating SM/MES number alloted

Rewinding of submersible motor, 45 HP, 3 Phase, 50 Hz, 415 Volt with PVC insulated / coated super enameled copper winding wire of existing gauge with other winding material such as insulating paper, sleeves, bamboo stick etc. as per standard manufacturers specification including cleaning of stator, slots including replacement of defective parts and testing complete all as specified and as directed .

All as item No. 13.00 above but submersible motor 30 HP complete all as specified and as directed.

All as item No. 13.00 above but submersible motor 20 HP complete all as specified and as directed.

All as item No. 13.00 above but submersible motor 15/12.5 HP complete all as specified and as directed.

All as item No. 13.00 above but submersible motor 7.5 HP complete all as specified and as directed.

All as item No. 13.00 above but submersible motor 2.5/2 H.P complete all as specified and as directed.

S&F in replacement epoxy type cable jointing kit 25/16 Sqmm 3 core complete with all the jointing material, ferrule, insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and as directed.

S&F in replacement epoxy type cable jointing kit 10/6 Sqmm 3 core complete with all the jointing material, ferrule, insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and as directed.

S&F in replacement epoxy type cable jointing kit 2.5 Sqmm 3 core complete with all the jointing material, ferrule, insulation tape etc for 1100 Volts flat submersible copper conductor cable complete all as specified and as directed.

M&L for machining work required for repair to submersible pump set 75 HP to 45 HP by straightning, polishing of pump shaft, making screw and key way, complete including replacement of wornout parts re-assembling pump after repair for smooth functioning of pump complete all as specified and as directed. Note:- Fixing payment shall be deemed to be included in quoted rate.

Supply only SS impellers with key and distance bushes suitable for 45/30/20/HP Pump complete all as specified and as directed.

Supply only SS impellers with key and distance bushes suitable for 15/12.5/7.5/HP Pump complete all as specified and as directed.

Supply only PVC impellers with key and distance bushes suitable for 2.5/2 HP Pump complete all as specified and as directed.

Supply only NRV suitable for 45/30/20/HP Pump complete all as specified and as directed.

Supply only NRV suitable for 15/12.5/7.5/HP Pump complete all as specified and as directed.

Supply only Bearing bush upper & lower suitable for 45/30/20/HP Pump complete all as specified and as directed.

Supply only Bearing bush upper & lower suitable for 15/12.5/7.5/HP Pump complete all as specified and as directed.

Supply only Neck ring suitable for 45/30/20/HP Pump complete all as specified and as directed.

Supply only Neck ring suitable for 15/12.5/7.5/HP Pump complete all as specified and as directed.

Supply only Distance sleeve suitable for 45/30/20/HP Pump complete all as specified and as directed.

Supply only Distance sleeve suitable for 15/12.5/7.5/HP Pump complete all as specified and as directed.

Supply only High tensile nut bolts/stud suitable for 7.5 to 45 HP complete all as specified and as directed.

Supply only GM motor bush upper and lower (set of two) for 45/30/20 HP complete all as specified and as directed.

Supply only GM motor bush upper and lower (set of two) for 15/12.5/7.5 HP complete all as specified and as directed.

Supply only Rotor bearing sleeve upper and lower for 45/30/20 HP complete all as specified and as directed.

Supply only Rotor bearing sleeve upper and lower for 15/12.5/7.5 HP complete all as specified and as directed.

Supply only Coupling with key for motor pump for 45/30/20 HP complete all as specified and as directed.

Supply only Coupling with key for motor pump for 15/12.5/7.5 HP complete all as specified and as directed.

Supply only Sand Guard for submersible pump set for 45/30/20 HP complete all as specified and as directed.

Supply only Sand Guard for submersible pump set for 15/12.5/7.5 HP complete all as specified and as directed.

Supply only Housing upper & lower for 45/30/20 HP complete all as specified and as directed.

Supply only Housing upper & lower for 15/12.5/7.5 HP complete all as specified and as directed.

Supply only Thurst bearing assembly for submersible pump set motor of 45/30/20 HP complete all as specified and as directed.

Supply only Thurst bearing assembly for submersible pump set motor of 15/12.5/7.5 HP complete all as specified and as directed.

Supply only CI Bowl suitable for submersible pump set 45/30/20 HP complete all as specified and as directed.

Supply only CI Bowl suitable for submersible pump set 15/12.5/7.5 HP complete all as specified and as directed.

Supply only flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 16 Sqmm , ISI marked and connected to submersible motor complete all as specified and as directed. Make:- National Cables / Finolex / Havells / Plaza / Polycab

Supply only Flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 6 Sqmm , ISI marked and connected to submersible motor complete all as specified and as directed. Make:- National Cables / Finolex / Havells / Plaza / Polycab

Supply only Flat water proof submersible cable 3 core copper conductor, PVC insulated 1100 volts grade stranded 2.5 Sqmm, ISI marked and connected to submersible motor complete all as specified and as directed. Make:- National Cables / Finolex / Havells / Plaza / Polycab

Supply only M S column pipe 150 mm dia 3.00 m long, heavy grade as per IS:1239 both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as required complete all as specified and as directed.

Supply only M S column pipe 100 mm dia 3.00 m long, heavy grade as per IS:1239 both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as required complete all as specified and as directed.

Supply only M S column pipe 80 mm dia 3.00 m long, heavy grade as per IS:1239 both ends flanged duly welded on threads with 4 Nos mild steel flat iron ribs, and provision for passing of submersible cable including nuts, bolts and packing as required complete all as specified and as directed.

S&F in repairs framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of Ladder in Over Head Tank and similar work con-forming to Fe 290.Gde-E-165 all the articles shall be painted with two coat of food grain synthetic enamel paint over a coat of red oxide primer after preparation of steel surfaces complete all as specified and directed. Note:- Necessary safety tools and measure should be the whole responsiblity of contractor and rate of all T&P included in quoted rates.

Supply only steel wire rope stranded 10 mm dia for hanging of submersible pump set including clamp etc complete all as specified and as directed.

Repair/Maint of Wire less type water level indicator system (i.e. water level indicator, connecting cables, water level sensor) of any type, checking and tightening of all connections, replacing pieces of burnt wires to make it functional complete all as specified and as directed. Note:- Spare parts shall be measured and paid seperately under respective items of BOQ.

Supply only Automatic water level indicator transmitter wire less type fixed in over head reservior heavy duty complete all as specified and as directed.

Supply only Automatic water level indicator repeater wire less type complete all as specified and as directed.

Demolition of brick work masonry of any description, built in any type of cement mortar complete all as specified and directed.

M&L for brick work with subclass `B` bricks, in straight or curved on plan exc 6.0 m mean radius, built in CM (1:6) complete all as specified and directed.

Taking down cement of cement lime plaster of any description on brick or stone walls or concrete surfaces, ceiling etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces , finished even and smooth without using extra lime or cement complete all as specified and directed.

M&L rendering 5 mm thick in cement mortar 1:3 on ceiling of brick or concrete surface, finished fair and even complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of Oil bound distemper over one coat of primer on walls complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparing of old decorated surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

Complete removal of existing treatment on walls/columns, bracings, domes etc complete all as specified and directed.

M&L for preparing surfaces and applying two coats of cement base paint on walls complete all as specified and directed.

Demolition of Cement concrete (Unreinforced) of any description in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in flooring/plinth protection/sub-base finishing concrete surface even and smooth without using extra cement complete all as specified and directed.

Supply & fixing in replacement sluice valves 250 mm dia class PN-1.0 , IS-14846 with flanged ends, stainless steel spindle and iron wheel including nut bolts and rubber packing complete all as directed by Engineer in charge. Make Kirloskar /Upadhaya /Kartar

All as per item no 72 but 200mm bore

All as per item no 72 but 150mm bore

Supply & fix in replacement of cast iron non-return valve 200 mm dia ncluding nut ,bolt ,washer and rubber packing complete all as specified :-Make Kirloskar/ Upadhaya/ GDPA /Kartar

Supply & fix in replacement of cast iron non-return valve 150 mm dia including nut ,bolt ,washer and rubber packing complete all as specified :-Make Kirloskar/Upadhaya/GDPA /Kartar

Supply and replacement of Bib tap 15 mm size ISI marked standard of PTMT any colour high pressure screwed for iron pipes and fixed. Make Prayag /polytuf/symet

Supply, installation, testing and commissioning of Submersible pump set electric driven, ISI marked, , pump with bronze impellars, CI casing, with ss shaft, leaded bronze bearings, / bushes , complete all as per IS- 8034 with copper wound submersible motor suitable for 415 Volts , 3 phase, 50 Hz supply of suitable HP, stain less steel tubing as per IS-9283 of 2013 ( suitable for 200 mm dia borewell ) with Head 90-95 mtrs and discharge 1400-1500 LPM, 5 stage complete Make- KSB or equivalent Note : Rate quoted by contractor shall deemed to be inclusive of lifiting of existing submersible pump from borewell, removal of old pump set and fixing of new one complete with cable joint water proff and relowering complete all as specified and directed by Engr-in-charge

M&L (in replacement) for making translite colour print LED panel for water supply site plan of pump house and OHT's or any other purpose including using clear acrylic sheet, blurr acrylic sheet of suitable thickness, clipon edge lit LED frame with using of high resolution LED complete with adopter and necessary fixing arrangements for making LED panel, wall mounted complete all as specified and as directed. NOTE:- (i) Water supply site plan kept at AGE E/M-II office. (ii) Letters or characters size shall be as directed by Engineer-in-charge.

M&L(in replacement) for design, manufacture, supply, installation and comissioning LED display boards of following sizes having compact design and maintenance friendly, the base of the board made of ACP(aluminium composite Panel) 3 mm thick and back side of board covered with GI sheet 24SWG, the letters and borders made of acrylic sheet 3 mm thick of colour as approved by Engineer-in-charge, LED module should as per requirement of letter space, the display language may be English/Hindi(Alpha numeric), its visibility should be suitable for day & Night (Outdoor application) and should be visible upto 25.00m (minimum), the text effect should be static, the LED suitable for power supply 230 volts/50 Hz, AC with switch ON and OFF the power supply to the display boards, the board shall be suitably braced on back side with angle iron 40mmx40mmx3mm and making good of disturbed surfaces as per original including necessary connection with 3 core copper conductor cable 1.5 sqmm from LED display boards to ceiling rose complete all as specified and as directed:- (a) Rectangular board having max 40 letters or characters in English language letter or character size, height not exceeding 250mm and back depth max 65mm of suitable width. NOTE:- Angle iron 40mmx40mmx3mm including nuts, bolts and washers shall be measured and paid seperately under respective items of BOQ.

Material and Labour in replacement for 3 core PVC insulated sheathed armoured stranded copper conductor cable of size 2.5 sqmm 1100 volt grade all as specified and directed by Engineer in Charge.

S&F in replacement of electronic Timer suitable for 7.5 HP to 45 HP star delta starter complete all as specified and as directed. Make:- L&T / BCH / Siemens / Legrand

S&F in replacement of MCCB TP, 415V, 100 Amp 25 KA complete all as specified and as directed. Make:- Legrand / Schneider / L&T / Siemens

S&F in replacement of MCCB FP, 415V, Adjustable type 125 Amp 25 KA complete all as specified and as directed. Make:- Legrand / Schneider / L&T / Siemens

S&F in replacement of MCCB FP, 415V, Adjustable type 160 Amp 25 KA complete all as specified and as directed. Make:- Legrand / Schneider / L&T / Siemens

S&F in replacement change over switch on load type front handle operated 415V with rating of bus bar 200 Amps four pole 415 Volt complete all as specified and as directed. Make:- Legrand / Schneider / L&T / Siemens

S&F in replacement wireless water level indicator Digital type with 7-segment LED display water level of the tanks in % with resolution of 1-2 % resolution, it receive water level data from transmitter and display in % with reset switch to put off the buzzer sound with fuse protection system on/off switch for Receiver display unit including water level data transmitter with maintenance free water level sensor complete with maximum range of signal approx 500 m at arieal distance including necessary suitable size of copper cable connection for 230 volts supply complete all as specified and as directed. Make:- Aqua Brim model Penta cool challenger digital / Sapcon / Johnson automation and control. Note:- Old unseviceable wireless water level indicator Digital type will be deposited by the contractor in E/M store yard.

Disconnecting the electric connection from starter and open well submersible pump set installed in JK including taking out of pumping set with electric motor of capacity 15 HP from the SWT and strip opening, cutting the burnt out winding, cleaning the stator and re-winding the same with super enameled copper winding wire of same gauge using top class of insulating material and over hauling of pump including lath / machine work for making housing of bearing, metaling, welding, turning surfacing, polishing of rotor shaft, and rethreading and replacement of neck ring, bearing of required size (Make-NBC/SKF), bushes, rubber insertion sheet, nuts, bolts and washers including necessary other items for its smooth functioning and testing complete reassembling the same and re-fixing back in its original position complete all as specified and as directed.

All as per item No. 91 but 30 H.P complete all as specified and as directed.

S&F in replacement of single phase preventor 415 volt, 50 HZ, complete all as specified and directed. Make:- MINILAC / Havells /Kirloskar /L&T

Supply only water pressure gauge, 100 mm dial size of range 0 to 7.0 Kg/Sqcm complete all as specified and as directed.

M&L for laying rubber matting infront of electric panel of installation of size 1M X 2M X 12 mm thick complete all as specified and as directed.

S&F in replacement of fully automatic star delta starter suitable for 50 HP pump set with relay 45-75 Amp in sheet metal enclosure complete all as specified and as directed. Make:- L&T / Legrand / Schneider / Siemens

S&F in replacement of fully automatic star delta starter in replacement suitable for 30 HP pump set with relay 30-50 Amp in sheet metal enclosure complete all as specified and as directed. Make:- L&T / Legrand / Schneider / Siemens

S&F in replacement of DOL starter in replacement suitable for 2.5 HP pump set in sheet metal enclosure complete all as specified and as directed. Make:- L&T / Legrand / Schneider / Siemens

S&F in repairs 70 W LED, energy saving, environment friendly, long life exclusive innovating dia cast aluminium IP-66 protection, flood light suitable for highway lighting and general purpose including fixing arrangement and fixed on overhead tank's pillar / pump house complete all as specified and as directed. Make:- Havells / Bajaj / Philips

S&F in repairs new generation IP-65 POST TOP, energy saving, environment friendly, long aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source including fixing arrangement complete all as specified and as directed. Make:- Havells / Bajaj / Philips

S&F in repairs 70 W new generation energy saving, environment friendly, long life LED street light made up of pressure dia cast aluminium housing with high power LED as lighting source ans less embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV built-in surge protection device and general purpose including 1.5 m long bracket with clamp and nut bolt for fixing arrangement and fixed on overhead tank's pillar/pump house complete all as specified and as directed. Make:- Havells / Bajaj / Philips

Supply only chlorine testing kit comprising of samples of chlorine contents in seald tube from 0.1 to 2.0 PPM and OT solution testing of residual chlorine in water while using Sodium hypo chlorite, testing tube complete all as specified and as directed.

M&L for earthing complete (in replacement) with galvanized mild steel earth plate electrodes 600x600x6mm thick buried directly in ground to a depth not less then 2.25m deep below ground level with top edge of the plate not less then 1.5 m below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around to the plate, using GI strip 32 x 6 mm as earth strip electrode bolted or rivited to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI light grade pipe from upper end of earth plate up to equipment 20 mm dia bore GI pipe light grade as water pipe from earth chamber to upper edge of earth plate, Test point, GI funnel with wire mess fixed on water pipe and PCC 1:2:4 type B1(using 20 mm graded crushed stone aggregate) as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B1(using 20 mm graded crushed stone aggregate) duly reinforced with MS round bar 6 mm dia @ 100 c/c both way with 10 mm dia MS TMT bar as in lifting handles, excavation, earth work including laying of GI Pipe concealed in floor and wall all as described in electrical plate of SSR Part-I including testing on completion complete all as specified and as directed. Note:- If the desired earth resistance is not found earthing shall be redone by the contractor at without any extra cost to the Goverment.GI earth strip up to 7.5 mtr is deemed to be included in unit rate.

S&F in replacement galvanised iron strip 32x6mm fixed on walls/batten or recessed or buried in ground complete all as specified and directed.

S&F in replacement LED Aviation light with all necessary connection complete all as specified and directed. Make:- Havells / Bajaj / Philips

S&F in replacement 1100 volts grade cable PVC insulated 10 sqmm multistranded aluminium conductor, overall PVC sheathed twin core flat cable complete all as specified and directed. Make:- National Cables / Finolex / Havells / Plaza / Polycab

S&F in replacement 1100 volts grade cable PVC insulated 6 sqmm multistranded aluminium conductor, overall PVC sheathed twin core flat cable complete all as specified and directed. Make:- National Cables / Finolex / Havells / Plaza / Polycab

Supply, installation, commissioning & testing (in replacement ) of LT Bus Bar Panel of size 650mm X 600mm X 300mm, made out by CPRI approved panel manufacturer 415 volts, TPN wall / floor mounted on suitable angle iron frame outdoor type cubical made out of 2 mm thick CRCA sheet weather, dust & vermin proof with rubber gasket with high class powder coating internally & externally fixing in position by provision of nut and bolts & addition / alteration required for fixing existing cables and connecting the all incoming / outgoing cables by suitable size of aluminium lugs stands nuts, bolts & washers including to accommodate properly following control switches complete all as specified and directed:- (a) Aluminium bus bar TPN 200 Amps rating made of high conductivity aluminium strip of suitable length with sleeves - 01 Set

S&F in repairs MS Nut bolts with spring washers off sizes all as directed by Eng in charge.

Sampling of non chlorinated water from various pump houses under AOR of AGE E/M WS Chakeri as and when directed by Engineer-in-Charge and testing the water for bacteriogogical, Physical and chemical as per IS-1622 and 3025 from any Government/NABL approved laboratories and submission of test report to Engineer-in-Charge within 10 days of direction for testing as directed by Engineer-in-Charge complete all as specified and directed . Note:- Sampling shall be done by the authorised rep of the approved laboratory from whom the testing of water is to be carried out in presence of JE/Engineer-in-Charge.

M&Lfor fixing in replacement ventuary/ orific arrangment made out of MS pipe 150 mm bore 7.0 mm thick 0.50mtr long(appx) including welding of flange at both end and five Nos. socket of 20 mm bore with fixing of nipple and gate valve of size 20 mm bore and one No. reducer of size 50 x 20 mm complete all as directed by Enginner in charge.

Cleaning of Pump house and all connected valve pits inside and outside and cleaning roof of building cutting of grass in side of boundery wall , surrounding of OHTs and complete remove the all waste materials approx area upto 500 sqm complete all as specified and directed.

Preetpowercontrol