CERTAIN SPECIAL REPAIR AND LBW WORKS AT MIRAN SAHIB UNDER GE JAMMU

Amount

B/R portion: - Dismantling wall and ceiling boards (fibre, pulp, insulation etc), or insulation boards / slabs / blankets, any thickness any type including cover fillets, complete all as specified and directed.

Dismantling wrought iron or mild steel work as in wind tie, grill grating etc complete all as specified and directed.

Dismantling AC corrugated, semi corrugated sheets in roof covering including ridge complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in roof covering fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPs as in ridge of roof fixed with self tapping screws or L-type or J-type or cranked hook bolts complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for removing of existing treatment (scrubbing, washing down etc) of old plaster or painted surfaces of wall complete all as specified and as directed.

Material and labour for 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15 mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of surface and applying two coats of oil bound distemper on new plastered surface over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of surface and applying two coats of cement based paint on old brick work surface complete all as specified and directed.

Material and labour for preparation of new plaster or painted surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1 / 2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified including taking down old plaster and two coats of cement based paint complete all as specified and directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and fixing factory made solid panel PVC moulded door shutter with particle board core 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded prelaminated PVC sheet on front face and 2 mm thick plain color PVC sheet on back face supply and fixing in frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned complete all as specified and directed.

Supply and fixing 35mm thick factory made wooden moulded panel door shutter with masonite facing on both side of (two, three or four panel design as approved) made of solid core using machine filled rigid expanded polyurethane foam. The door facing plate shall be 3.2mm thick complete all as specified and directed.

Supply and fixing 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as specified and directed.

Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and directed and shown on drgs No CEPZTD-324/07 Sh 1/3 to 3/3. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm iron flat 200 mm long. (iii)10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

Supply and fixing pressed steel frames (factory made) made out of 1.25 mm thick black MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete size of frame 105 x 60mm including bottom of each chowkat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side complete all as specified and directed.

Description all as per serial Item No. 22.00 here-in-before but size of frame 125 X 60mm for fixing of two shutters complete all as specified and directed.

Description all as per serial item No. 22.00 here-in-before but size of frame 60 x 40mm for fixing of two shutters complete all as specified and directed.

Supply and fixing structural steel / tubular section work as in roof trusses (framed), post, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections or MS tube pipe) including distance pieces, cleats etc Fe-410W (Gde E-250) quality 'A' including one shop coat of primer complete all as specified and directed.

Supply and fixing mild steel framed works such as grills, framed guard bars, etc and similar work as in cooler stands etc. conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Supply and fixing 18 / 19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice lamination and other side balancing with lamination complete all as specified and directed.

Material and labour for 6 mm thick teak wood lipping over prelaminated particle board, fixed with nails complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in back filling, bed block for hold fast, coping, benching on corner of joints etc complete all as specified and directed.

Supply and fixing 100 mm size butt hinges medium weight cold rolled stainless steel complete all as specified and directed.

Supply and fixing Aluminium handles 'D' type anodised 150 mm long ISI marked complete all as specified and directed.

Supply and fixing Aluminium handles 'D' type anodised 125 mm long ISI marked complete all as specified and directed.

Supply and fixing 150 mm long aluminium anodised barrel tower bolt of extruded section ISI marked complete all as specified and directed.

Supply and fixing 200 mm long aluminium anodised barrel tower bolt of extruded section ISI marked complete all as specified and directed.

Supply and fixing 300 mm long dia 16mm aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

Supply and fixing 100 mm hasp and staple safety type aluminuium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing 2nd class hard wood small fittings such as brackets of any type, shaped door and windows stops and the like article not exceeding 200 cu.cm each and fixed complete all as specified and directed.

Supply and fixing in repair galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Supply and fixing 3mm thick sheet glass, ordinary quality glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparing surface of old steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Providing & fixing in position suspended false celling system using 'E' Grid suspended celling Grid system. The size of grid shall be 600 X 600mm with GI frame work, main runner 39 X 24mm, cross tee 29 X 24mm and wall angle 22.2 X 22.2mm using 4mm thick high pressure stream cured non primered classic / designer variant E-Board ISI Marked IS No 14862-2000. Fibre cement 'E' board to be placed in the gird of 'E' grid suspended ceiling grid system duly suspended by 4mm dia GI bar hangers from the purlins of the roof with butterfly clips complete all as specified and directed.

Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finished in CM 1:4 complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick, edgeless, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade, pattern, laying etc of tiles complete all as specified and directed.

Material and labour 10 mm thick rendering in CM 1:3 on other than fair face brick work even and fair faces to receive tiles complete all as specified and directed.

Description all as per serial item No 47.00 here-in-before but as in skirting complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles (450 x 350 mm) x 7 mm thick as in dados, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specfied and directed.

Material and labour for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills cooking platforms and like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite including taking down old complete all as specified and directed.

Material and labour for screed bed or bedding layer of mortar 20 mm thick for laying floor finished in CM 1:4 complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick as in floor to match the shade of the slab including rubbing, polishing upto mirror finish complete all as specified and directed.

Material and labour machine cut kota stone slab flooring 20-25 mm thick as in riser in step, skirting / dado to match the shade of the slab including rubbing and polishing upto mirror finish complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing 15 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc, any type of pipe complete all as specified and directed.

Supply and fixing 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf / cm² fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Dismantling water tanks exceeding 500 and not exceeding 1000 ltr complete all as specified and directed.

Supply and fixing 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) five layers hoisted and fixed in position complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rest and 'P' or 'S' trap and connection to flushing pipe, anti-syphonage pipe complete including provision of cement concrete bedding complete all specified in SSR part I complete all as specified and directed.

Supply and fixing vitreous china wash down water closet pan pedestal pattern white including fixing bolts, including white coloured plastic seat cover, CP brass jet nozzle with 600 long PVC pipe complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and fixing in repair PVC valveless, symphonic action type, flushing cistern, 10 ltrs capacity, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

Supply and fixing in repair low density PVC connections commercial quality 15mm bore with PTMT nuts of length 450mm complete all as specified and directed.

Supply and fixing in repair low density polyethylene LDPE pipes of pressure rating 6 kgf/sq.cm 32 mm bore for flusing cistern complete all as specified and directed.

Supply and fixing in repair 15 mm bore bib taps long nose / long body, cast copper alloy CP fancy type with capstan head handle screwed down, screwed for brass, weight not less than 450 gms ferrule and fixed complete all as specified and directed.

Supply and fixing in repair 15 mm bore angle valves, cast copper alloy CP fancy type, half turn, screwed down, high pressure, with crutch or butterfly handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repair 15 mm bore brass stop cock, cast copper alloy CP with long shank and cup (concealed type), high pressure, with capstan head handle, weight not less than 450 gms screwed both ends for iron pipe or for unions complete all as specified and directed.

Supply and fixing in repair 15mm dia CP pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot or Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

Supply and fixing in repairs 15 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing in repairs 20 mm dia Gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and fixing in repairs shower rose brass chromium plated with swivel joint of size 125 mm cast copper alloy CP fancy type with CP neck 9" long made to shape, weight not less than 350 gms complete all as specified and directed.

Taking up or down CI / PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints and removing lead of 100 / 75 mm dia pipe complete all as specified and directed.

Supply and fixing cast iron soil, waste and vent pipe of bore 100mm in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

Supply and fixing cast iron soil, waste and vent pipe of bore 75mm in any length with or without ears with cement joints fixed to wall complete all as specified and directed.

Supply and fixing in repair 75 mm bore cast iron bends (any radius) with oval access doors complete all as specified and directed.

Supply and fixing in repair 75 mm bore CI branch pieces (Tee), single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches with oval access complete all as specified and directed.

Supply and fixing in repair cast iron vent cowl 100 mm complete all as specified and directed.

Supply and fixing in repair cast iron vent cowl 75 mm complete all as specified and directed.

Supply and fixing in repair stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 75 mm bore pipe complete all as specified and directed.

Supply and fixing in repair stack clamps out of 50mm x 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stay to walls or roof for 100mm bore pipe complete all as specified and directed.

Supply and fixing in repair 75 / 100 mm cast iron floor trap with stainless steel grating including jointing to waste pipe fixed in cement concrete B-1 (1:2:4) complete all as specified and directed.

Supply and fixing in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (min weight 210 gms) complete all as specified and directed.

Supply and fixing in repair brass CP towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and directed.

Supply and fixing in repair MS peg set of six power coated as approved by GE complete all as specified and directed.

Supply and fixing in repair drapery curtain rod of metallic 20mm dia covered with PVC coating including MS bracket, end ball, rounded block (coated with brown / cherry / golden colour) of approved pattern and shade fixed in position by drilling holes in walls and fixed the brackets with rawl plug and steel screws complete all as specified and directed.

Supply and fixing in repair Glass shelf rectangular size 450mm x 150mm, 5 mm thick glass with stainless steel bracket as per sample kept in AGE B/R office complete all as specified and directed.

Supply and fixing in repair cabinet mirror of PVC moulded size 600 x 450 mm as per sample kept in AGE B/R office complete all as specified and directed.

Demolition of cinder concrete of any description and in any position and removing the rubbish from work site complete all as specified and directed.

Material and labour for preparing surface of sunken slab and applying 15 mm thick cement plaster in CM 1:4 with liquid water proofing compound Pedilite LW plus @ 200 ml per 50 Kg of cement both on floor and wall finished surface even and smooth. The surface shall then be cured and filled with water for 48 hours and allowed to dry then apply APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm) laid with 75 mm side overlap and 100 mm overlap on primed surfaces by forced application as per manufacturer's instructions over one coat of industrial bituminious 85/25 grade at the rate of 1.20 Kg/Sqm over the plastered surfaces of sunken floor / wall and applying a course of a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm over bitumen felt and sunken floor shall be filled with graded cinder concrete upto top level to receive to flooring complete all as specified and directed.

Material and labour for GI spout 25mm dia light grade, fixed to walls complete all as specified and directed.

Supply and fixing 0.63mm thick mild steel plain black sheet water troughs / eaves board, cut to size edges, fixed to steel members (welded) including bending, turning up, etc complete all as specified and directed.

Supply and fixing 0.56mm plain Aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the pieces can be cut) as in crumple joint complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Material and labour for 100mm thick cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

Material and labour for 60 mm thick machine pressed precast concrete interlocking paver block (M-35 grade) any shape and size using grey cement and pigment confirming to IS-15658-2006 complete all as specified and directed.

Material and labour 50mm thick sand cushioning for machine pressed precast concrete interlocking paver block complete all as specified and directed.

Demolition of concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 gde and three parts of sand (all by weight) complete all as specified and directed.

Supply and fixing in repairs, mild steel enamelled helical door spring 150 mm (ISI Marked) size including roller and roller plate, fixed to wooden / steel frames by any means as required complete all as specified and directed.

Dismantling of old steel as purlin and trusses complete all as specified and directed.

Material and labour for prepartion of surface and applying one coat of oil bound distemper on old surface complete all as specitied and directed.

Material and labour for preparation of old plaster or painted surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

Material and labour rendering 20mm thick in CM 1:4 on concrete surface such as chajjas, upward fascias, roof surfaces and similar items including two or more dubbing coat, surface finished even and fair without using extra cement including mixing of liquid water proofing compound (LWPC shall be measured and will be paid separately) upto height of four storeyed building with all necessary formwork, scaffolding, lifting arrangement for external surface upto 4 storey buildings complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in hard / dense soil complete all as specified and directed.

Material and labour for treating the bottom and sides of excavation at the rate of 5 litres of emulsions per square metre of surface area complete all as specified and directed.

Material and labour for treating the top surface of filled area at the rate of 5 litres of emulsions per square metre of surface area complete all as specified and directed.

Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of perimeter wall complete all as specified and directed.

Material and labour PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in mass concrete in foundation complete all as specified and directed.

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete all as specified and directed.

Material and labour brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in CM 1:4 as in (half brick) partition walls complete all as specified and directed.

Material and labour RCC M-25 (using 20mm graded crushed stone aggregate) type B-1 as in foundations / plinth beams complete all as specified and directed.

Material and labour RCC M-25 (using 20mm graded crushed stone aggregate) type B-1 as in columns, pillars complete all as specified and as directed.

Material and labour RCC M-25 (using 20mm graded crushed stone aggregate) type B-1 as in chajjas complete all as specified and as directed.

Material and labour for reinforced cement concrete, type B-1, M-25 (using 20mm graded crushed stone aggregate) as in lintel beams, roof beams supported on walls as for roof slabs, lintel etc complete all as specified and as directed.

Material and labour for reinforced cement concrete, type B-1, M-25 (using 20mm graded crushed stone aggregate) as in slabs and shelves etc complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter complete all as specified and as directed.

Formwork to sides and soffits of roof beams, tie beams, etc. also splays between floors and beams, etc complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions square / rectangular complete all as specified and as directed.

Formwork to soffits of slabs including supports, overhangings etc, for fair finished surfaces of concrete complete all as specified and as directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

Formwork to edges of roof slab of thick not exceeding 20cm wide and as in similar work complete all as specified and as directed.

Material and labour for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Material and labour for TMT bars 5 to 8mm dia as in stirrups, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified as in stirrups and as directed.

Material and labour rendering 10mm thick on fair faces of brick surfaces built in CM (1:6), finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour rendering 15mm thick in CM 1:4 with WPC @ 3% by weight of cement on other than fair faces of brick surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick finished fair and smooth without using extra cement in CM 1:4 in ceiling surfaces complete all as specified and as directed.

Material and labour for rendering 10mm thick with WPC @ 3% by weight of cement finished fair and smooth without using extra cement in CM 1:4, on roof surfaces complete all as specified and as directed.

Material and labour for preparing plastered surface and applying two coats of weather coat paint over a coat of same quality primer on wall surfaces complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in each layers hard / dense soil complete all as specified and directed.

Removing excavated materials in soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above the starting point all as specified and directed.

Material and labour hard core of gauge of broken boulders exceeding 63mm but not exceeding 100 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed.

Supply and fixing 15 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors or in trenches complete all as specified and water tightness test as directed by Engineer-in-Charge.

Supply and fixing 20 mm bore steel tubing, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floors or in trenches complete all as specified and water tightness test as directed by Engineer-in-Charge.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) five layers hoisted and fixed in position complete all as specified and directed.

Supply and fixing vitreous china corner wash basin, white, size 350 x 420 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets, waste coupling cutting, waste pipe for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and fixing aluminium powder coated four track sliding window / ventilator shutters (two tracks for glazed shutters and two tracks for fly proof shutters). Glazing with 5.5mm thick plain sheet glass and gauging with aluminium wire mesh of dia 0.45mm and aperture 1.40mm with sections of minimum 2mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, handle, tower bolts, screws etc. complete all as specified and as directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Material and labour for surface dressing not exceeding 15 cm deep in hard dense soil complete all as specified and directed.

Material and labour for chequerred cement concrete tiles with grey cement and pigments of size 250 x 250 x 22mm thick set and pointed in neat cement slurry in floors over a screed bed of 15mm thick in CM 1:6 complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation of manholes complete all as specified and directed.

Material and labour concrete bed to 150 mm bore pipe (1:4:8) type D-2 including haunching against the sides of pipes complete all as specified and directed.

Supply and fixing 150mm RCC pipe class NP-2 laid and jointed complete with collars in trenches complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary formwork and moulds etc and set cement mortar 1:6 complete all as specified and as directed.

E/M portion: - Material and labour for point wiring one light point / one fan point controlled by one switch complete with 1.50 sqmm copper conductor multistranded PVC insulated FRLS and unsheathed cable in existing PVC rigid concealed conduit with new cast iron / pressed steel sunk terminal box covered with 3 mm thick laminated sheet hylam brand IS-2036 marked with continuous PVC insulated multistranded copper wire 1.50 sqmm dia FRLS PVC insulated complete all as specified and directed.

Description all as per serial item No 149.00 here-in-before but for multi 5 pin 5 amp socket outlet on same board complete all as specified and directed.

Description all as per serial item No 149.00 here-in-before but for multi 3 pin socket outlet 5 amp socket on independent board complete all as specified and directed.

Description all as per serial item No 149.00 here-in-before but for multi 3 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistranded cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20 / 25 mm dia and unsheathed copper conductor multistranded cable 2.5 Sqmm as earth wire FRLS PVC insulated in green colour all as directed by Engineer-in-Charge complete with new CI / pressed steel sunken black with hylum top sheet cover all as specified.

Supply and fixing socket outlet 5 Pin, 5A, flush type complete all as specified and directed.

Supply and fixing for switch piano, flush type single pole one way 5 Amp, 240 volts complete all as specified and directed.

Supply and fixing ceiling rose, 3 Phase / PVC / polycarbonate isolated body complete all as specified and directed.

Material and labour switch piano flush button single pole one way 15 Amp complete all as specified and directed.

Material and labour socket outlet 3, 5 pin and 15 Amp multi purpose shuttered type complete all as specified and directed.

Material and labour for fan regulator stepped electronic type suitable for AC, 240 V complete all as specified and directed.

Material and labour for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Material and labour self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and directed.

Supply and fixing LED lights fitting 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and directed.

Material and labour for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length including taking down old wiring complete all as specified and directed. Note : Wiring shall be done in proper colour coding.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep minimum air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single phase, 230V of size 300m sweep with blades and frame and louvers complete all as specified and directed.

Material and labour of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Material and labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1, pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube floor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion all as specified and as directed.

Supply and Laying and testing cable XLPE Insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 25 Sqmm, 4 core in and including taking out old one all as specified and directed.

Material and labour sand filling in cushioning bed of cable and consolidation complete all as specified and directed.

Supply and laying comman burnt clay building sub class `B' bricks, laid over sand cushioning laid at right angle along with cable complete all as specified and directed.

Supply and laying GI tubing tight graded including all accessories for encasing cables for mechanical protection, laid under plinth / floors / path culverts with complete accessories such as bends / sockets / reducers / saddles including necessary threading / drilling works of sizes (MS work will be measured under separate item in schedule) 40 mm complete all as specified and directed.

Labour for cutting to existing GI Pipe line of size 40 to 100 mm in position for addition / alteration or insertion of branch connection / Tee complete with Excavation, Returning filling, removal, cutting, existing GI Pipe line threading or drilling / bore in pipe line complete with MS clamp and jointing material i.e. Tee 40 X 20mm, nipple 40 mm clamp all as per site requirement complete all as specified and as directed.

Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Description all as per serial item No 149.00 here-in-before but for one light point controlled by two 2 way switches, with cable 1.5 Sqmm complete all as specified and directed.

Description all as per serial item No 149.00 here-in-before but for One bell / buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sqmm size complete all as specified and directed.

Supply and fixing in replacement of modular switch two way 6 amps, 1 module complete all as specified and directed.

Supply and fixing in replacement for bell push, flush type single pole, 5 Amp, 240 volts complete all as specified and directed.

Supply and fixing in replacement Calling bell Ding Dong / buzzer AC 230 Volts, single pole complete all as specified and directed.

Supply and fixing in replacement LED light fitting 1 x 9W / 1 X 10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Taking down existing unserviceable ceilling fan repair / maint including replacement unserviceable spare parts i.e. bearing, bush, PVC connector, PVC clamp, canopy, capacitor, including painting, rewinding of any make / type and size (1200 / 1400 mm sweep) with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfacory RPM as per manufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Taking down existing unserviceable Exhaust fan repair / Maint including replacement unserviceable spare parts i.e. bearing, bush, PVC connector, PVC clamp, canopy, capacitor, including painting, rewinding of any make / type and size with super enamelled copper wire of appropriate gauge as existing to obtain the specified and satisfactory RPM as per manufacturer's specification, including replacement of all insulation materials, varnishing, heating, drying, assembling of stator / rotor, connection and testing complete all as specified and as directed.

Supply and fixing in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing 12 No's MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar all as specified and directed including taking down old unserviceable DB / MCB any type. Note: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) Rate includes MCB SP 40 Amps 12 Nos 10 KA. (iii) TPN DB, MCB and MCCB should be of same make.

Taking down unserviceable electric meter along with existing angle iron steel box from the wall and refixing electric meter in position after repair replacement of MCB TPN box including replacement of PVC flexible conduit for cable protection complete with making the existing wall neat and clean including patch work, plaster, brick work and white wash as per site requrement complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

GENESIS INDIA

M/S PRITHIVI RAJ AND SONS

Bidder Name

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S PRITHIVI RAJ AND SONS

GENESIS INDIA