COMPREHENSIVE MAINT AND REPAIR TO PLUMBING, SANITARY FITTING AND ALLIED WORKS IN MD ACCN OF N4 AREA AT AF STATION CHAKERI KANPUR

Amount

Dismantling floor, heath or wall tiling including cement mortar bedding and removing rubbish from the MD land complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. laid over and including 15mm thick screed bed in cement mortar (1:6) including jointing in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x450mmx 6 to7 mm thick as on walls over and including 10mm thick rendering in cement mortar (1:4) and jointing in neat slurry and pointing in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. laid over and including15mm thick screed bed in cement mortar (1:6) including jointing in neat cement slurry and pointed in coloured cement to match with shade of tiles complete all as specified and directed.

Cutting chases on brick wall for concealed water tubing and making good to facings where required and pointing in CM (1:3), cutting not exceeding 10 CM girth complete all as specified and directed.

S&F Green marble work 16 to 18mm thick (One pieces, table rubbed and polished) in cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade cutting, polishing and slightly mounding open edge and including over and including 15 mm thick screed bed in CM (1:6) etc. complete all as specified and directed.

M&L for RCC (1:2:4) type B-1using 20 mm graded stone aggregate as in plateform slab, shelves etc. complete all as specified and directed.

S&F TMT MS bars 8mm dia and above bars cut to length bent to shapes required including cranking bending spirally for hooping for columns and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for form work of sides & soffits to shelves & plateforms etc. complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x47mm made out of 5mm single side pre-lam PVC sheet reinforced with M.S. Square tube, fixing in opening as per specification & drawings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (styles), consisting of frame made out of M S tubes for top and bottom rail. M.S. frame shall be covered with heat moulded laminated PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of single side prelam sheet to be fitted in the M.S. frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, fixing in frame at site as per specification & drawing complete all as specified and directed.

S & F 100 mm size butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

S & F 150mm long Aluminium, barrel tower bolt of extruded section complete all as specified and directed.

S & F Aluminium, anodised handles extruded type of 125 mm size complete all as specified and directed.

Demolition of cement concrete in ground floors and paving’s n.exc. 15cm thick below or above ground level including tiles etc. complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise provided for all as specified and directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M & L for brick work with fly ash bricks straight or curved on plan to any radius in half bricks built in cement mortar (1:4) complete all as specified and directed.

M & L for brick work with fly ash brick straight or curved on plan exc 6.0 mtr mean radius built in (1:6) cement mortar using of old size bricks complete all as specified and directed.

Labour only brick work with sub class 'B' brick straight or curved on plan not exc 6.0 mtr mean radius built in CM complete all as specified and as directed by Engr-in-charge.(Old serviceable brick obtained from item 17.00 here-in-before).

Taking up or down 15 mm dia old serviceable /unserviceable steel tubing any grade and connection cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down 20mm old serviceable/ unserviceable steel tuning any grade and connection including cleaning for removal to store complete all as specified and directed.

M & L for 15mm bore steel tubing medium grade, galvanized with all fittings such as bend, elbow, socket, tees fixed to wall or in ceiling or in floors including cutting, threading and making forged bends on pipes MS hooks etc. complete all as specified and directed.

M & L for 20mm bore steel tubing medium grade, galvanized with all fittings such as bend, elbow, socket, tees fixed to wall or in ceiling or in floors including cutting, threading and making forged bends on pipes MS hooks etc. complete all as specified and directed.

Re-fixing of 15 mm bore old steel tubing and connection in new or old position fixed in wall or floor, ceiling etc. complete all as specified and directed.

Re-fixing of 20 mm bore old steel tubing and connection in new or old position fixed in wall or floor, ceiling etc. complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces etc complete all as specified and directed.

M & L for 15mm thick plastering on fair faces of brick wall or concrete surfaces in CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M & L for preparation of new plaster surfaces of wall and applying three coat of white wash on walls complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coat of oil bound distemper including one coat of primer over and including 2mm thick wall care putty complete all as specified and directed.

M&L for 10mm thick plastering on ceiling or concrete surfaces in CM (1:6) finish even and smooth without using extra cement complete all as specified and directed.

M&L preparation of new plaster surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

S & F in repair of 15 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight should not be less than > 142 gms) complete all as specified and directed.

S&F in repair of 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (Minmum weight should not be less than > 210 gms).complete all as specified and directed.

S&F in repair 15 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe complete all as specified and as directed.

S&F in repair 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe complete all as specified and as directed.

Dismantling water tanks of cap exc 250 Ltr and n exc 500 Ltr complete all as specified and as directed.

S&F 500 ltr rotational moulded polyethylene white colour water storage tanks (cylindrical vertical with closed top) triple layer construction, arrangement to screwed the lid cover, ISI mark hoisted & fixed in position complete all as specified and directed.

S&F 300 ltr rotatational moulded polyethylene white colour water storage tanks (cylindrical vertical with closed top) triple layer construction, arrangement to screwed the lid cover ISI mark hoisted & fixed in position complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern 580x440mm with integral foot rest “white” with P or S trap (excluding flushing cistern and flush pipe) but including connecting to trap and flush pipe, anti-syphonage pipe etc. making good to floor complete all as specified and directed.

S & F in repairs PVC dual flushing cistern low level 10 Ltr capacity with inlet ball, float valve, handle, flush pipe Make- Prayag, cat part No- 502 or equivalent make in Cera/ Essco as approved by GE complete all specified and directed.

S&F in repairs PVC internal kit for flushing cistern, 10 Ltr capacity with inlet ball, float valve, handle complete all as specified and directed.

Repairs to high / low level flushing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend including replacing of rubber washer cheek nuts plunges/flush pipe etc. for any type of flush complete all as specified and directed.

S & F in repairs 1 mm thick stainless steel kitchen sink with drainage board of over all size 914X460X203 mm and bowl size 405 mm X 354 mm X 203 mm with plug washers and wastes including bedding in CM (1:3) to dwarf wall or including fixing cantilever brackets, waste pipe and connecting union to pipe complete all as specified and directed.

S & F in repairs vitreous china wash hand basin, white, flat back of size 550 X 400 mm excluding taps, wash, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F 32 mm waste coupling of PTMT half or full threaded (minimum wt 45 < gm) complete all as specified and directed. Make - Prayag, cat No- 103/101 or equivalent in Cera/ Essco as approved by GE.

S & F in repairs waste coupling for steel sink complete all as specified and directed. Make - Prayag, cat part No-SA-03 or equivalent make in Cera/Essco as approved by GE.

S & F in repairs 32mm PVC waste coupling for WHB complete all as specified and directed. Make- Prayag, cat part No- 103/101 or equivalent make in Cera/ Essco as approved by GE.

S & F 32mm PVC waste Pipe for WHB/sink complete all as specified and directed. Make- Prayag, cat part No- 3272 or equivalent make in Cera/ Essco as approved by GE.

S & F in repairs 32mm PVC waste Pipe for WHB/sink complete all as specified and directed. Make- Prayag, cat part No- 3272 or equivalent make in Cera/ Essco as approved by GE.

S & F pillar taps of PTMT any colour screwed for iron pipe ans fixed (Min Wt >110 Gm) complete all as specified and directed.

S & F in repairs pillar taps of PTMT any colour screwed for iron pipe and fixed (Min Wt > 110 Gms) complete all as specified and directed.

S & F in repair PVC Connection 450 mm long with two PTMT nuts complete all as specified and directed.

S & F in repairs 15mm dia stop valves of PTMT any colour high pressure screwed for iron pipes (Min Wt > 90 Gm) complete all as specified and directed.

S&F in repairs 15mm dia angle valves of PTMT any colour high pressure screwed for iron pipes (Min Wt > 90 Gms) complete all as specified and directed.

S&F in repairs 100 mm dia grating of PTMT(Min Wt > 25 Gms). Make - Prayad Cat no 111 or equivalent make as approved by GE complete all as specified and directed.

S&F 60cm long tubular towel rail of PTMT fixed with screws and wooden/plastic cleats (min wt 60 gms) in repairs complete all as specified and directed. Make-Prayag, Cat NO-200 or equivalent make as approved by GE.

S&F PVC lid for water storage tank suitable for 500/1000 ltr capacity complete all as specified and directed.

S&F PVC lid for water storage tank suitable for 300 ltr capacity complete all as specified and directed.

S & F in repair MS kitchen sink/WHB bracket fixed in CM (1:3) or PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and directed.

S&F in repairs 15mm dia Bib tap standard of PTMT, any colour screwed for iron pipes (Min Wt 90Gms) complete all as specified and directed. Make-Prayag,Cat part No-123-C or equivalent make as approved by GE.

S & F in repair 15 mm bore Swivel shower of PTMT any colour (Minimum weight 40gms) complete all as specified and directed.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc. capacity exe 250 litre but nexe 500 litre complete all as specified and directed. (Note-Date of cleaning should be mentioned over each tank by synthetic enamel paint and no extra payment shall be made on this account).

Easing of door shutters for easy closing / opening, tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc. complete all as specified and directed.

Easing of window shutters, kitchen cupboard shutters, show case shutter drawers including fixing of screws adjusting handles, knobs tightening piano hinges including misc small adjustments complete all as specified and directed.

S & F in repair 75mm long double legged door stopper of aluminium alloy with rubber gasket complete all as specified and directed.

S&F in repair aluminium anodized hasp & staple safety type with mild steel hinge pin including bolt to hinge plate fixed with screws of 100mm length complete all as specified and directed.

S&F in repairs mild steel cold rolled medium weight butt hinges 100mm size by welding to angle iron chowkhat complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified & directed.

Hacking out old broken glass (any size, quality or description) from wooden or steel frames complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares of any size complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed.

M&L for 40mm thik PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floors finished even & smooth using extra cement in patches complete all as specified and directed.

Supply only 3mm thick and 38 mm wide glass dividing strip complete all as specified and directed.

S&F in repair curtain rods of cromium plated mild steel conduit pipe 19/20mm dia with wall thickness 1mm including chromium plated bracket holders for holding of rods and fixed with screws to pelmet boxes/wall complete all as specified and directed.

Dismantling timber scantling of size 40 Sq cm and over in section in framed work any position complete all as specified and directed.

M&L for scantling in 2nd class H/W clean sawn fixed with nails in timber frame work complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semi corrugated etc.) sheet in roof covering complete all as specified and directed.

S&F for 6mm thick asbestos cement sheets corrugated or semi corrugated fixed with 'L' type or 'J'' hook and washers as in roof covering in paches etc. complete all as specified and directed. (Note- Minimum 120 sqm area should be fixed over kitchen, bath and toilet roof).

Fixing only old asbestos cement (corrugated or semi corrugated) sheets fixed with and including M&L for 'L' type, 'J' type hook or cranked bolt and washers complete all as specified and directed. (Old AC sheets obtained from item No.79.00 here-in-before).

Dismantling of plain galvanised steel sheet any type and any size situated over AC sheet roofing complete all as specified and directed.

S & F 0.63 thick plain galvanised steel sheeting with 120 gm Zinc (spelter) coating per sqm both sides including as in ridges, hips, valley gutters drip and straight flashing fixed with L or J type hook and washers complete all as specified and directed.

Fixing only for old plain galvanised steel sheeting as in ridges, hips, valley gutters drip and straight flashing fixed with L or J type hook and washers complete all as specified and directed.(Old AC sheets obtained from item No. 82.00 here-in-before).

M&L for providing cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping, benching, roof curb, rounded or chamfered on edges finished top surface even and smooth without using extra cement at any height complete all as specified and directed.

Removing of excavated/demolished materials exc 1.50km but nexc 5 km and depositing where directed by Engr-in-Charge.

Dismantling mild steel Work of any description fixed in any position not otherwise provided complete all as specified and directed.

M&L framed MS work as in steel doors including gusset plate, rails, bracket, MS plate etc. and similar works conforming to FE 410 complete all as specified and directed.

Fixing only old wind ties obtained from item No 87.00 here-in-before complete all as specified and directed.

Dismantling wall or ceiling boards (fibre, pulp insulation etc.) of any thickness & at any height complete all as specified and directed.

Dismantling timber scantling not exceeding 40 Sqcm in section in framed work in any position complete all as specified and directed.

M & L plain fillets rectangular in section, clean sawn, secured with nails and sectional area exc 3 & nexc 6 sqcm, using IInd class HW complete all as specified and directed.

S&F 4mm thick AC sheet plain building board fixed to timber framed work screws at any height complete all as specified and directed.

Fixing only old AC sheet plain building board fixed to timber framed work fixed with screws at any height complete all as specified and directed.

Taking down chowket or frame n.exc 1.50 sqm with shutters (without taking of shutter from frame) etc. complete all as specified and directed.

Ditto all as per item No 95.00 above item but exc 1.50 Sqm but n.exc 4.00 Sqm complete all as specified and directed.

Taking down shutter n. exc. 1.0 Sqm complete all as specified and directed.

Taking down shutter exc. 1.0 Sqm not exc.2.0 Sqm complete all as specified and directed.

S&F plain solid straight chowkhat or frame rebated on the solid rounded or chamfered put together with glue pinned at joints in 2nd class HW complete all as specified and directed.

S&F 35mm thick of IInd class HW factory made glazed and skelton shutters open rebated sand prepare to receive glass/gauge etc, without sash bars, edges of framing plain chamfered or rounded, fitted without mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick of IInd class HW factory made glazed and skelton wndow/ventilator shutters open rebated sand prepare to receive glass/gauge etc, with plain chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain chamfered or rounded, fitted cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part 1 Sec 8 clause 8.20 (b) complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 75 mm size but hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 75 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repair 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S & F in repairs mild steel helical door spring 300 mm ordinary rat tail type including roller and roller plate fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F in repair mild steel helical door spring 150 mm ordinary rat tail type incl roller and roller plate fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed.

S & F 250mm long, mild steel sliding door bolt stove enameled black with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.

S & F in repair 250 mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 150 mm long mild steel barel tower bolt stove enameled black with bright bolt complete all as specified and directed.

S & F in repair 150 mm long mild steel barrel tower bolt stove enameled black with bright bolt complete all as specified and directed.

S & F 125 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

S & F in repair 125 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

S & F 100 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

S & F in repair 100 mm MS pressed handle oval type stove enameled black complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc. 10cm width or girth complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description exc. 10cm width or girth complete all as specified and directed.

Taking down steel chowkhat or frame with shutters (without taking of shutter from frame ) of any description etc. complete all as specified and directed.

S & F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified and directed.

S&F Steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges steel peg stay complete all as specified and directed.

M&L for MS work such as grills, grating etc. with end of bars shouldered and/ or riveted or forged in to spikes framed guard bars barred iron doors, ladders, framed balusters, walk ways railing, framework of water tanks and similar works conforming to FE 410 Gde-310 complete all as specified and directed.

M&L for PCC (1:2:4) type B1 using 20mm graded stone aggregate as in bed block for fixing of angle iron post and the similar work complete all as specified and directed.

M&L for preparation of old decorative plastered surface of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorative plastered surface of walls and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorative plastered surface of walls and applying one coat of oil bound distemper complete all as specified and directed.

M&L for complete removal of existing treatment on walls including preparation of surfaces, even & smooth by using of sand paper and applying two coat of oil bound distemper over one coat of primer over and including 1-2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description exc 10cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down eaves, gutters and rain water pipes including all fittings of any size and pattern complete all as specified and directed.

S&F in repair PVC SWR pipes 110 mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 110 mm dia bore (in fitting) PVC (SWR) bend any radius complete all as specified and directed.

S&F in repair 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F 75 mm dia bore (in fitting)PVC (SWR) bend any radius complete all as specified and directed.

P.N. BROTHER

SHASHI CONTRACTORS

Jain Builders