Special Repairs to Bldg No. CL-13 (Offrs Md Accn) of 4 Assam at Dagshai Cantt under GE Kasauli

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

Non skid ceramic coloured tiles 7mm to 8mm thick (squre/rectangular) area of each tile exc 0.11sqm but not exc 0.18 sqm in floors , set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:4 complete all as specified.

Glazed ceramic coloured tiles 450X300X7mm thick,laid in vertical surfaces, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

Coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge

Coloured Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in wall skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified directed by Engr-in-Charge

Demolition of stone slabs of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified.

16 to 18 mm thick granite stone machine cut (table rubbed & polished) in one piece as in steps,jambs,pillars,windows cills,cooking platform and similar work bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing including making hole in platform and screed bed for bedding 20 mm thick in cement mortar 1:6 ,complete all as specified.

16 to 18 mm thick granite stone machine cut as in skirting / Dado/riser laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including grinding and polishing and rendering 10mm thick in CM 1:4 complete all as specified.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, including making hole by drilling for gas pipe and other similar situations all as specified and directed

Taking down cement plaster on brick or stone wall, Ceilling etc including raking out joints, hacking for key scrubbing down with water etc to receive new plaster etc. all as specified and directed

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified and directed.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified

Rendering 5 mm thick in CM 1:3 on concrete surfae as in ceilling complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of Chalk whitening etc complete all as specified.

Preparation of newly plastered surfaces of walls and applying two coat of oil bound distempering over a coat of Chalk whitening etc complete all as specified.

Preparation of newly plastered surfaces of ceilings and applying two coats of oil bound distempering over a coat of Chalk whitening etc complete all as specified.

Complete removal of existing treatment of walls and applying two coat of oil bound distempering etc complete all as specified.

Complete removal of existing treatment of ceilings and applying two coat of oil bound distempering etc complete all as specified.

Complete removal of existing treatment of walls and applying two coat of cement base paint etc complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm but n.exe 4.0 Sqm each complete all as specified.

Taking down shutter of any description exe 1 Sq.m but n.exe 2.0 Sqm each complete all as specified.

Taking down shutter exc 2.00 Sqm each complete all as specified and as directed.

Mild steel cupboard shutter with frame Godrej pattern, made out of 22 gauge mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type, size 65mm, 4 levers with escutcheon pushes and two keys) with & including two coats of spray painting with synthetic enamel paint with approved tint over a coat of red oxide primer including fixing with 6 Nos 12mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed.

2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

35 mm thick factory made, 2nd class hard wood, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated etc complete, all as specified .

35 mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats complete all as specified.

Soild PVC door frame of size 50mm x 47mm made out of 5mm but single side prelam PVC sheet and edges will be painted to match with prelaminated sheet reinforced with MS tube as per specification & drawings.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and both side prelam PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable both side prelam PVC sheet beading and joined together with solvent cement,and stile and rails feathered at edges etc as per specification and drawings.

18/19 mm Pre laminated block boards,exterior grade,prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with nails fixed in repair complete all as specified.

Continuous (piano) hinges, brass, bright finish, width of flaps(when open) 30 mm fixed in repair complete all as specified.

100 mm long aluminium handle fabricated type anodised, complete all as specified.

40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified.

Hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size complete all as specified.

Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staple etc complete all as specified.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples etc complete all as specified.

100 mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed.

50mm long medium weight Butt Hinges cold rolled mild steel and fixed complete all as specified and directed..

Small fitting such as bracket of any type latch hinge blocks shaped door and window stops and the like including all necessary labours articles n.exc 200cu.cm each complete all as specified and directed.

Mild steel work as in hold fast and similar articles conforming to Fe-290 Gde-165 complete all as specified and directed.

PCC 1:3:6 type C-I using 20mm graded stone aggregate as in bed block and filling of chowkats etc complete all as specified.

Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed complete all as specified and directed.

Aluminium anodized 150 mm long barrel tower bolt of extruded section and fixed complete all as specified and directed.

150mm long aluminium anodized handles fabricated type complete all as specified and directed.

300mm long Aluminium alloy anodised sliding door bolt with hasp and staple(bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.

Mild Steel 300mm, ordinary rat tail rod patttern springs including roller & roller plate complete all as specified and directed by Engineer-in-charge.

Coloured sheet glass 5mm thick tinted fixed with window frames of area of each pane not exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge

Coloured sheet glass 5mm thick tinted fixed with window frames of area of each pane exc 0.50 Sqm complete all as specificed and directed by Engr-in-Charge

Preparation of new surface by applying two coats of synthetic enamel paint , over a coat of red oxide primer , on steel Surfaces of any description, over 10cm in width or girth , not other wise described, including complete all as specified and directed.

Preparation of surfaces by applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Dismantling wall as ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

GI metal suspended ceiling system, GI lay in plain of 600x600x0.5mm (TEGULAR) edge tiles in globel white colour to be laid on strong 24mm Tee section flanges colour white having rotary stiching on the main runner with web height of 38mm complete all as specified and directed Note- (i) To comprise main runner spaced at 1200mm centres securely fixed to the structural soffits at 1200mm maximum centre. The first/last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200mmx600mm module. Cut cross tees longer than 600mm required independent support. 600mmx600mm module to be found by fittings 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trime to be wall angles of size 3000mm x 19mm x 19mm secured to walls at 450mm maximum centres. (ii) The HCL sleeve anchor fastener of thread size 6.50mm x 25/5 with soffits cleat made of galvanised steel of size 27x37x25x1.6mm and level clip in dimensions of 85x30x0.8mm with 4mm GI wire complete all as specified and as directed.

Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device fixed in repair complete all as specified and directed.

Powder coated Curtain rod of dia 25 mm decorative pattern with bracket stops & roller including all necessary fittings etc fixed in repair complete all as specified and directed.

50mm PCC 1:3:6 type C-1 using 20mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection etc complete all as specified.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm etc fixed in repair complete all as specified.

Stainless steel plate rack of size 24"x36"x10" with shelves,hooks and railing to keep plates vertically and horizontally,including necessary fixing arrangement.etc fixed in repair complete all as specified and as directed.

Stop valve 15 mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for union 15mm dia and fixed in repair complete all as specified and as directed.

All as per item No. 64 Above but 20mm bore complete all as specified and as directed.

Bib taps cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for iron pipe or for bruss ferrule 15 mm dia fixed in repair complete all as specified and as directed.

Vitreous China wash hand basin white with pedastal flat back size 580x450 mm including brackets, fixed in repair complete all as specified

15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc fixed in repair complete all as specified.

PVC bath cabinat with mirror , fixed in repairs complete all as specified.

Chromium plated shower rose with or without swivel joints and size including fixing to steel pipe or unions mixing valve including three joints to steel pipes or union and plugging and screwing to walls fixed in repairs complete all as specified.

Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,) complete incl making good to floor to match with adjoining surfaces all as directed by Engr-in-Charge

10 ltr capacity PVC valveless syphonic action type flusing cistern low level white with inlet ball valve float and handle including bracket fixed in repair complete all as specified and directed.

PVC connector 15mm bore with PTMT nuts of length 450mm fixed in repairs complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 20 mm bore complete all as specified and directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs etc complete all as specified.

Towel rail 600mm long chromium plated fixed in and including chromium plated brass screws and wooden/plastic cleats etc fixed in repair complete all as specified.

Rotational moulded polythene water storage tanks (cylindrical or vertical with closed top) hoisted & fixed in position all as specifed in SSR Part-I 1000 Ltr capacity incl dismantling old water tank etc complete all as specified.

Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe having bore dia 20 mm ( Minimum weight 20mm-210gm) and fixed in repair complete all as specified and directed.

75 mm dia PVC (SWR) floor trap, with grating including jointing with solvent cement etc fixed in repair complete all as specified.

75 mm dia PVC(SWR)'P' trap including jointing with solvent cement etc fixed in repair complete all as specified.

Demolition of cement concrete in sunken portion and floor complete all as specified.

12 mm thick rendering in CM 1:4 on faces of sunken portion complete all as specified.

Lime concrete 1:2 using 40 mm graded brick agg as in sunken portion complete all as specified.

Supply only water proofing compound.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified.

Mild rolled steel straps in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410W (Gde E-250 Quality-A) all as specified and directed

Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified

Brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius in cement mortar 1:6, complete all as specified.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in position not otherwise specifically provided for complete all as specified and as directed.

Precast RCC (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregate as in landing cover slab for manholes , septic tank set in cement mortor ( 1:6) including necessary form work complete all as specified and as directed. (Reinforcement shall be measured separately)

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.5mm dia or securing with clips quality confirming to deformed or twisted bars complete all as specified and as directed.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repair complete all as specified and as directed by the Engineer-in-Charge

110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, fixed in repair complete all as specified and as directed by the Engineer-in-Charge

75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, fixed in repair complete all as specified and as directed by the Engineer-in-Charge

75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, fixed in repair complete all as specified and as directed by the Engineer-in-Charge

PVC (SWR) bend 110mm dia bore complete all as specified and directed by Engr-in-Charge

PVC (SWR) bend 110mm dia bore with access door complete all as specified and directed by Engr-in-Charge

PVC (SWR) junction single(Single T) equal or unequal 110mm dia bore with access door complete all as specified and directed by Engr-in-Charge

PVC(SWR) vent cowl110mm dia bore complete all as specified and directed by Engr-in-Charge

PVC(SWR) bend 75mm dia bore complete all as specified and directed by Engr-in-Charge

PVC(SWR) bend 75mm dia bore with access door complete all as specified and directed by Engr-in-Charge

PVC(SWR) junction single (Single T) equal or unequal 75 mm dia bore with access door complete all as specified and directed by Engr-in-Charge

PVC(SWR) vent cowl 75 mm dia bore complete all as specified and directed by Engr-in-Charge

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 fixed in repair complete all as specified and directed.

Welded steel wire fabric to wood or steel members per square meter not exceeding 4 Kg., fixed in repair complete all as specified.

Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

Powder Coated Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified.

Powder Coated Anodised aluminium window and ventilator shutters, side hung type without sash , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such as peg stays 150 mm long (1 no) hinges type B-1 100 m long(2 Nos) suitable handle(1 Nos) complete all as specified.

Applying 1 mm thick white cement based wall care putty on walls etc complete all as specified.

Applying 1 mm thick white cement based wall care putty on ceiling etc complete all as specified.

Taking down carefully existing copper/Aluminum point wiring any type (light,socket or power) complete including fittings such as switches, ceiling roses, pendents, sockets, boxes, light fitting etc and removing from site and making good disturbed surfaces of walls, floors etc complete all as specified.

Concealed point wiring using approved colour coding as per IS with unsheathed PVC insulated multi stranded copper conductor single core 1.5 Sqmm FRLSH in heavy duty PVC concealed conduit and its fittings, ISI marked, with sunken box 1.5 mm steel sheet including 3mm thick plastic laminated sheet properly cut for fixing switches and sockets etc, incl PVC insulated and unsheathed stranded copper conductor single core of size 1.5 sqmm as earth continuity conductor to common earth and connecting to earth dolly (switch and sockets to be measured and paid separately) proper colour coding will be maintained complete all as specified and as directed for the followings.

One light/Fan/Bell point controlled by one way switch 6 Amp .

One 3 pin socket outlet 5 Amps on the same board with other switches

One 3 pin 5 Amp socket out let controlled by one switch on independent board

Point wiring for Power point contolled by one 15 Amp switch independent with PVC insulated and unsheathed multistranded FRLSH single core 4.0 Sqmm (nominal area) cable using approved colour code as per IS drawing in and incl heavy duty PVC concealed conduit and its fittings, ISI marked as per directed by MES deputed rep with all accessories including providing sunk cast pressed steel terminal boxes of size made out of 1.5mm thick MS sheet duly painted with black bitumen paint over a coat of red oxide primer and providing 3 mm thick plastic laminated bakelite sheet (HYLAM BRAND) top cover or PVC switch board of required size as per site requirement alongwith copper earth wire PVC insulated & unsheathed multistranded (FRLS) copper conductor cable of size 4.0 Sqmm as continous earth wire connected to common earth and earth dolly complete all as specified and as directed.

Switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts after taking down unsv complete all as specified & directed.

Switch piano flush type (ISI marked), single pole, one way 16 Amps, 240 Volts after taking down unsv complete all as specified & directed.

Socket outlet 2 in 1, 3 pin, 6 Amp piano complete after taking down unsv all as specified & directed.

Socket outlet, 2 in 1, 3 pin 16/15 Amp, piano flush type after taking down unsv complete all as specified & directed.

Lamp holder insulated body with back plate suitable for batten fittings after taking down unsv complete all as specified & directed.

Ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals after taking down unsv complete all as specified & directed.

Bell push piano type one way 5/6 Amp, 240 volt complete all as specified & directed.

Bell electric AC 240 volt, 50 HZ complete all as specified & directed.

LED Tube light fitting, 20 watt, CDL, 230 Volts, 4 feet long, complete with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm twin core copper flexible conductor cable incl LED lamp with 100 lumen/watt after taking down unsv complete all as specified and directed. Make: Product Description LCTLN-20-CDL in Crompton or its equivalent in the makes mentioned in Appendix 'B'

Wall mounted Mirror light LED fitting LED Batten, Extruded thermoplastic body with PC diffuser in unique square shape, 12 Watt, 2 Feet long, CCT 6500K incl dismantling taking down unsv fitting any type complete all as specified and directed. Make: Crompton or its equivalent in the makes mentioned in Appendix 'B'

Surface mounted LED bulk head fittings (indoor/outdoor type)10W luminaire with ABS body & polycarbonate diffuser incl lamp after taking down unsv complete all as per specified and directed. Make: Product Description LBHP-10-CDL in Crompton or its equivalent in the makes mentioned in Appendix 'B'

LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF not less than 0.9 (min) after taking down unsv complete all as per specified and directed . Make: Product code of LLP0101404 in Polycab or its equivalent in the makes mentioned in Appendix 'B'.

Building security LED light 25 Watt energy saving LED ASTRA NEO street light made up of pressure dia cast housing with toughened glass and high power LEDs with option of secondary optic with IP66 protection, efficacy : 110LM/W after dismantling taking down unsv one all as specified and directed. Make: Product description LSTS-25-CDL-M in Crompton or its equivalent in the makes mentioned in Appendix 'A'. (Note for item No 126 to 129) : (a) Make of fitting and driver shall be same. (b) Power factor shall be 0.95 and above.

Building security light bracket made out of galvanised steel light grade pipe of 25/40mm dia as per dia of light, 1.5 mtr long bend to an angle of 120 degree with 02 Nos clamp made out of 50mm x 5mm flat iron and 04 sets of nuts, bolts and washers painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable and depositing to E/M Store complete all as specified and as directed. Make : Cat Ref Fresher ES Metal in Polycab or its equivalent in the makes mentioned in Appendix 'A'

MCB, single pole 'B' series having braking capacity 10 KA, 6 to 32 Amp, 240 volts, after taking down unsv complete all as specified & directed. Make: Product description SB201 M-C6 to C32 in ABB or its equivalent in the makes mentioned in Appendix 'A'.

MCB SPN having braking capacity 10 KA, 32-40 Amp, 240 Volt, 'B' Curve after taking down unsv complete all as specified and directed. Make: Product description SB201 M- C32 NA in ABB or its equivalent in the makes mentioned in Appendix 'A'.

MCB SPN having braking capacity 10 KA, 40-63 Amp, 240 Volt, 'B' Curve after taking down unsv complete all as specified and directed. Make: Product description SB201 M-C40 to C63 NA in ABB or its equivalent in the makes mentioned in Appendix 'A'.

MCB TPN having braking capacity 10 KA 63 Amp, 240 Volt 'B' Curve after taking down unsv complete all as specified and directed. Make: Product description SB203 M-C63 NA in ABB or its equivalent in the makes mentioned in Appendix 'A'.

Sheet metal enclosure with double door for DBs conforms to IS:8623.III, IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 8 way, SPN 240 Volt incl blanking plate as per requirement after taking down unsv complete all as per specified and directed. Make: Product description 1SYM011608C001 in ABB or its equivalent in the makes mentioned in Appendix 'A'.

Sheet metal enclosure with double door for DBs conforms to IS:8623.III, IP:43 protection, shrouded neutral link & earth bar and cement spill protector, 6 way, TPN 415 Volt in blanking plate as per requirement after taking down unsvcomplete all as per specified and directed. Make: Product description 1SYM021606C001 in ABB or its equivalent in the makes mentioned in Appendix 'A'.

Supply and Install, testing and commissioning of electrical operated single phase, water storage heater (Geyser) of capacity 25 Ltrs with Ultra Diamond Glass line coated with magnesium rod, 8 bar working (Heavy Duty) heating element and including taking down unserviceable and deposit to MES Store Yard. Note:- Geyser will be fitted with fasteners-04 Nos including bolts washers etc and making good disturbed surface complete all as specified and as directed.

Surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC casing caping/PVC conduit size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces after taking down unsv complete all as specified and directed. Note:- (a) Two run of cable with one run of earth wire and one run of casing capping/conduit will be measured as one length.

Earthing complete with galvanised steel earth electrode plate of size 600x600x6.3 mm thick, buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below nomal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and including earth pit in cement concrete 1:2:4 type B-1, precast RCC cover in 1:2:4 reinforced with expanded metal, with suitable handle, excavation and earth work in any type of soil and including light grade GI watering pipe 20 mm bore with funnel wire mesh and medium grade GI wire protection pipe 15mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point including taking out existing unsv earthing complete all as specified and testing on completion complete all as specified and directed .Note - The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 20 mm GI pipe (light grade) for watering 15mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and 40mm thick RCC cover for pit etc & no extra payment will be made.

Supply and laying LT UG cable 4 core 16 sqmm XLPE Insulated sheathed armoured 1100 volts grade laid in trenches incl out door and indoor joint properly with clamping etc complete all as specified and directed by Eng-in-Charge.

Supply and laying Double wall corrugated HDPE duct pipe 50mm outer dia confirming to IS: 14930 (Part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge.

Babu Ram Sud and Sons

RAJESH BUILDERS

Vishal Builder

Sagar Builders