Providing, Supplying, erection, Testing and Commissioning of Transformer and Pole at Near Mohanpur toll ward No. 61 file No. 101/26X6/4

Supply of support for overhead line H-beam of I.S. standard including welding, drilling of required hole etc. complete as required. H-Beam 152x152mm , Std weight 37.1 kg per meter ( FOR HT LINE , ME , TRANSFORMER)

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 10 meters but not exceeding 13 meters in cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation , base padding & muffing including excavation and refilling etc. as required.(4.55 bags of cement/cmt.) (80 POLE FOR TRANSFORMER,LINE,ME )

Supplying and erection of galvanised stay set for 11kV overhead line complete with 19/20mm dia x 1.8 meters long stay rod, anchor plate of size 45cm x 45cm x 7.5mm thick, thimble, stay clamps, turn buckle (20mmx 600mm), 7/4.00mm dia G.I. stay wire and 11kV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40mm. nominal size) foundation including excavation and refilling etc. as required. (FOR HT END POLE & TRIANGLE)

Painting of pole bracket cable protecting pipe and its clamps in two coatings of All. enamel based primer as directed by Engineer-in- Charge. above 9 mtr.

Supplying of channel iron 75mm x 40mm x 7.14 kg/Mtr. V- shape cross arm for two 11 kV overhead line conductors complete with 50 mm x 6mm M.S. flat iron clamp, bolts and nuts including drilling holes for insulator pins, bolts and nuts etc. and painting with primer and finish paint as required. 11 KV V cross arm 65x65x6 mm angle type (FOR OVERHEAD LINE ERECTION OF CONDUCTOR)

M.S. Nuts and Bolts

Supplying of 50mmx 8mm M.S. Flat iron pole top bracket/cross arm for single 11/22/33kV overhead line conductor complete with fixing bolts, nuts and washers drilling holes for insulator pins, painting with primer and finish paint as required. top clamp (FOR OVERHEAD LINE)

Erection of pole top/straight two wire/V-shape two wire/angle iron/channel iron, Cross arm on steel tubular/Rail/Channel iron/PCC pole for 11kV/33kV as required. (ERECTION OF V CROSS AND TOP CLAMP)

Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire. (EARTHING OF PER POLE LT & HT)

Supplying and erection of 11kV pin insulator complete with large steel head G.I. pin, nut, washer etc. as required. (in 1 set 3 insulator) (FOR CONDUCTOR)