SPECIAL REPAIRS TO PERIMETER FENCING AND OFFICE TOILETS AT STN HQ DEHU ROAD

Dismantling posts of struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground (Natural ground/concrete, brick work) full length of post to be measured complete all as specified and directed by Engineer-in-Charge

Dismantling of chain link fencing wire mesh or any type including barbed wire fencing, folding servicable fencing for reuse complete all as specified and directed by Engineer-in-Charge

Excavation in post holes (or similar hole) each n. exc. 0.5 cum, getting out, returning filling and ramming earth or broken rubble mixed with earth around in layers n. exc. 25cm watering and removing surplus soil to a distance n. exc. 50cm and making good surface in soft and loose soil complete all as specified and directed by Engineer-in-Charge

M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation concrete for fencing post complete all as specified and directed by Engineer-in-Charge

S & F for angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410-0 or Fe 310-0 anyu size.for doors, balusters, nosing to steps including embeding in concrete and screwing etc.complete all as specified and directed by Engineer-in-Charge

S & F for MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 5 to 10mm dia of shank etc complete all as specified and directed by Engineer-in-Charge

Supply only chain link MS galvanised fencing incl line wire 50x50mm mesh (12 gauge) size and any type of strands, rails, straining bolts etc incle provn of binding wire all complete all as specified and directed by Engineer-in-Charge

Fixing only chain link fencing any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and directed by Engineer-in-Charge

M&L for round bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips etc.complete all as specified and directed by Engineer-in-Charge

M & L for two coats of synthetic enamel paint to new steel surfaces over a coat of red oxide primer surfaces of any description exc 10 cm in witdth or girth complete all as specified and directed by Engineer-in-Charge