Providing and fixing Retro Reflective Signages boards on various roads under Sub Division-IV, SWR-I,New Delhi Under MLALAD Scheme.

Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m: All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. a) Hot finished welded type tubes.

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. a) On steel work.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Modified Estimated cost after correction factor on on DSR 2023 on account of GST @ 0.973 on DSR Items

Manufacturing, supplying and fixing retro reflective sign boards sheet made up of 4mm thick aluminum composite panel material consisting of 3mm thick mineral core sandwiched between two Aluminum sheets (each 0.5mm thick), face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956 01(3M, Avery Dennison, Orafol and like brands ) in blue and silver white or other colour combination including subject matter, message, symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets to existing back support frame, backside of aluminum composite sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, sizes , specification and direction of Engineering-charge.

Manufacturing, supplying and fixing retro reflective sign boards Sheet/tape on existing boards, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 495601(3M, Avery Dennison, Orafol and like brands ) in blue and silver white or other colour combination including subject matter, message, symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 etc. complete as per drawing, sizes , specification and direction of Engineering-charge.

Credit for dismantled item received from the side in any condition and as available by dismantling. The Materials may only be remove from the site after measurement and inspection done by Engineer-in Charge. This dismembering / separation of different value items will be done by the contractor as per direction of Engineer in-Charge: MS Bar/ sections / structural steel/ RC jail/tubes/CGI sheet and similar items.

Please Enable Macros to View BoQ information