REPAIR TO INTERNAL ROAD AT POCKET 9 IN AGE B/R-III AT SAHARANPUR UNDER GE ROORKEE

Amount

Repair to pot holes and depth n exc 1 Sqm each including sweeping free from dust & mud, or water, scoring sunken surfaces in roads path etc. cutting around edges to least 25mm in depth and makinggood by applying tack coat @ 5 kgper 10 sq m, putting in premixed bituminous macadam, wellrammed and sealed with binder9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3mm size and again well rammed(including supply of premixedmacadam, binder and chippings).depth of potholes exc 30 mm complete all as specified and directed.

M&L for preparing black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and appling evenly a priming/tack coat with bituminous prime of paving bitumen VG 10 Grade @ at 5 kg per 10 sqm complete all as specified and directed.

M&L for Premix bituminous, macadam using paving bitumen laid, rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4% binder (paving bitumen VG-30) complete all as specified and directed.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. Applying evenly a tack coat with paving bitumen @ 5 Kg per 10 Sqm VG-10. Bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content VG-30 by weight of total mix, rolled and compacted to required camber and gradient with 8 to 10 ton power roller complete all as specified and as directed.

M&L for thermoplastic reflective paint as in road marking 2 mm thick single coat as in centre line or edge line road marking of 100/150 mm width using HOT MARK thermoplastic paint ( Hot application) white by indigeneous modern propelled raod marking machine as directed including all ingredients such as binder glass beads Titanium-diaoxide calcium carbonate lintar fillers thermoplastic requirement for glass beads shall be as per the table No. 800-4 specification including spraying of glass beads instrucions complete all as specified and as directed. Note: Make of paint STP, ASIAN or equivalent as approved by GE

Supply and Fixing Solar cat Stud, Exterior Aluminium, Interior; Bullet proof PC, Weight : 950 Gm Approx , Power Supply: Mono Crystalline Solar Cell (5V 60MA), Power Storage Device: Lithium iron battery (3.3V 500 MAH), Lighting Mode: Flash or Steady lighting, LED No : Single side 3 pcs , double side 6 pcs , Dispaly Colour: Red, Visual Distance: 1000m approx , Working Tempreture: -10 Degree Celcius~ 70 Degree Celcius,Starting Intensity : 300 Lux~ 600 Lux , Size 125x60 complete all as specified and as directed.

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. (Green/Yellow/Red colour) complete all as specified and as directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PAMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height above graund and 200mm below ground duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed.

GAYATRI CONSTRUCTION (BID ID -3204934)

ACE BUILDERS AND CONTRACTORS (BID ID -3207007)

RADHA ENTERPRISES (BID ID -3206625)