Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC | L1 | Accepted-AOC Awarded being 1st Lowest Bidder | |
| 2 | L2₹17.9 L+₹2.4 L (15.2%)Rejected-Finance HOUSE NO 8 589 BEHIND PHC HOSPITAL OLD BUS STAND KORBA KORBA CHHATTISGARH 495678 | 495678 | L2 | Rejected-Finance Awarded being 2nd Lowest Bidder | |
| 3 | L3₹19.7 L+₹4.1 L (26.3%)Rejected-Finance KOTHI NO 766 PHASE III MODEL TOWN BATHINDA PB | L3 | Rejected-Finance Awarded being 3rd Lowest Bidder | |
| 4 | L4₹23.8 L+₹8.2 L (52.9%)Rejected-Finance | L4 | Rejected-Finance Awarded being 4th Lowest Bidder |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
31 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vinod Kumar AE (Civil) AGE BR II Offg GE(S) Bathin
GE(S)Bathinda Bathinda Mil Stn
GE(S) BTD TOKEN NO 34 OF 2023-24 CERTAIN MISC BR REPAIRS TO CERTAIN BUILDINGS IN OTM ACCN OF SECTOR III UNDER AGE BR II UNDER GARRISON ENGINEER (SOUTH) BATHINDA AT BATHINDA MILITARY STATION
2023_MES_612030_1
GE(S)/BTD/TOKEN NO 34 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE(S)Bathinda
Class D
category a(i)
11 documents required · 11 mandatory
₹500
GE(S)Bathinda
₹80,000
Yes
5 Oct 2023
3 Aug 2023
2 Sept 2023
3 Aug 2023
31 Aug 2023
17 Aug 2023
Amount
Taking down chowkhats or frame with shutter (without taking off shutters from the frames) not exceeding 1.5 Sqm each and removal from site etc complete all as specified and directed.
Supply and fixing factory made PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, all as specified in Preamble 8B. 3.1 of SSR Part -II (2020) and all as shown on drawing of SSR Part-II (2020) including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site all as per instruction and drawing shown for item No 8080 of SSR Part II on Sl Page No 176. complete all as specified and directed.
Supply and fixing 100mm long (ISI Marked) extruded aluminium anodised butt hinges with galvanised mild steel screws etc complete all as specified and directed. .
Supply and fixing 150 mm long (ISI marked) aluminium anodised barrel tower bolts of extruded section, etc complete all as specified and directed. .
Supply and fixing 125 mm long, aluminium anodised handles, cast type, (ISI marked) etc complete all as specified and directed. .
Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but not exc 4 Sqm each etc complete all as specified and directed.
Supply and fixing Pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 etc complete all as specified and directed.
Supply and fixing for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.
M & L for PCC 1:3:6 type C1 (20mm graded stone aggregates) as in filling back of pressed steel door frames/chowkats and for fixing hold fasts, etc complete all as specified and directed.
Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and removal from site complete all as specified and directed.
Supply and fixing 2nd class HW 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed.
Supply and fixing 2nd class HW 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, gauze, etc.; sizes of members of shutters as specified in SSR Part I Section 8, Clause 8.24 (a) complete all as specified and directed.
Supply only mild steel Butt Hinges, 100 mm size, medium weight, cold rolled fixed with screws/welding to wooded/steel frames or chowkats, complete all as specified and directed.
Material and Labour for painting to new wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces etc complete all as specified and directed.
Supply and fixing MS galvanised mild wire cloth 0.56 mm nominal dia of wire and avarage width of aperture 1.18mm and fixed with tinned tacks to galvanised wire stapple etc complete all as specified and directed.
Supply and fixing in repairs Mild steel galvanised wire cloth 0.56mm nominal dia of wire and 1.18 mm average width of aperture fixed with tinned tacks or galvanised wire staple, complete all as specified and directed.
Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enameled black, with bright bolts not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on staple plate and fixed, complete all as specified and directed.
Supply and fixing mild steel barrel tower bolts, 200 mm long, stove enamelled black with bright bolts and fixed (ISI marked) complete all as specified and directed.
Supply and fixing mild steel pressed handles, 150 mm long, oval type, stove enamelled black (ISI marked) complete all as specified and directed.
Supply and fixing 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm in each pane complete all as specified and directed.
Supply and fixing 3.0mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed..
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/springs clips complete all as specified and directed.
Material and Labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide or zinc chrome complete all as specified and directed.
S&F Vitrous china urinal half stall type white ( excluding flushing cistern, flush pipe and waste pipe ) including connections to flushing pipe and out going pipes etc complete all as specified and directed
Dismantling existing broken unserviceable PVC tank of capacity 500 Ltrs complete all as specified and directed.
Supply and fixing three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Supply and fixing 20mm bore (weight 210 gms Minimum) ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size complete all as specified and as directed.
Supply and fixing in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make : Prayag/parryware/Essco/Cera
S & F in repair plastic water closet seat cover, white/ivory colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fixing in repair tubular towel railbrass chromium plated 20 mm dia D type 60 cm long including end brackets complete all as specified and directed.
Dismantling floor, hearth or wall tiling/terrazzo finish etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed and directed.
Material and labour for joint free non-skid coloured ceramic tiles 7-8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match the shade of tiles over and including 15 mm thick screed plaster in CM 1:6 etc complete all as specified and directed. .
Material and Labour for joint free glazed ceramic coloured tiles of approved quality in vertical surfaces 450mmx300 mm x7mm/ 600mm x 300 x 7mm thick set jointed in neat cement slurry/paste and pointed in coloured cement to match with the tiles over and including 10mm thick plaster in CM 1:4 complete all as specified and directed.
Material and Labour for non skid floor tiles, colored, of size 600x600x7mm thick or of size as approved as in floors set and jointed in neat cement slurry and pointed in white cement with pigments to match over and including the provision of 15 mm thick bedding layer in CM 1:6 complete all as specified and directed.
Description all as per Ser item No 35 above but on vertical surfaces as in skirtings etc on 10mm thick back coat in CM 1:4, complete all as specified and directed.
M&L vitrified Paver Tiles 9-10 mm thick of size 300mmx300mm in floors etc set and jointed in neat cement sluury and pointed in coloured cement to match with the tiles over and incl 15 mm thick screed plaster in CM 1:6 complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L 75mm thik plain Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in subbase of floor incl finishing etc complete as specified and as directed.
M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment etc complete all as pecified and directed.
M & L for Sand filling 25mm thick under floors or in foundation complete all as specified and directed.
S & F Aluminium powder coated ventilator including provision of neccessary rubber gasket for fixing glass panes etc complete all as shown in drawing No CEBT/SK-936 sheet 1/1 complete all as specified and directed. Note: Glass panes and wiremesh shall be measured and paid seperately under respectively Items of BoQ.
M&L in repairs marble work (Udaipur green slabs) not less than 16 mm thick (table rubbed and polished) as in cooking platforms and urinal partions and like in cement mortar (1:4) in pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including rounding the edges complete all as specified and directed.
Supply and fixing in repair 15mm bore bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for complete all as specified and directed.
Supply and fixing in repair 15mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
Supply and fixing in repair stop valve for 15 mm bore dia of pipe, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferrule etc complete all as specified and directed.
Supply and fixing in repair 15 mm bore fancy type chromium plated stop valve cast copper alloy, with long shank & cup (concealed type) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fixing in repair PVC connections 15 mm bore, 600 mm length, heavy duty, with PTMT nuts etc complete all as specified and directed.
Supply and fixing in repair brass chromium plated shower rose 125 mm size, with swivel joints, including fixing to steel pipe or union,etc complete all as specified and directed.
Supply and fixing in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm including 40mm dia waste fittings,brass,chromium plated with long screwed and fly- nuts,flange end bedded in red lead cement and other end fixed etc complete all as specified and directed.
M&L for 25mm dia fancy type PVC coated in wooden finish on MS pipe coloured curtain rod with brackets and knobs at both ends with 6No rings in 1meter length as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed. Note:- The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
Taking down or up 15 mm bore galvanised iron tubing/PL-AL-PE pipes and connection complete all as specified and directed.
Taking down or up 20 mm bore galvanised iron tubing /PE-AL-PE pipes and connection complete all as specified and directed.
Supply and fixing 15mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed. and directed .
Supply and fixing 20mm bore GI tubing medium grade with all fittings and fixed to walls & ceilings or laid in floors, complete all as specified and directed. and directed.
Taking down AC eaves gutters and rainwater pipes (any size and pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.
Supply and fixing 110 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.
Supply and fixing 110 mm bore, PVC (SWR) fittings such as bends, tee, shoe etc; fixed to PVC pipes,complete all as specified and directed.
Supply and fixing in repair vitreous china (white) squatting pan 'Orissa' pattern, white, size 580 x 440x260 mm, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flush pipe, anti-syphonic pipe etc including making good to floor and including trap set, in and including lime concrete complete all as specified and directed.
Supply and fixing in repairs 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and directed.
Supply and fixing in repair Vitreous china wash hand basin, white, flat back, fancy type, size 550 x 400 mm including cast iron cartilever bracket 32 mm dia brass waste coupling and including PVC waste pipe of 32mm dia, fixing of waste fitting and union etc complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories etc complete all as specified and directed.
Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories complete all as specified and directed.
Supply and fixing cast iron sand cast soil waste and vent pipe 100mm bore with or without ears fixed with chemical cement joints fixed in walls complete all as specified and directed.
Supply and fixing cast iron sand cast soil waste and vent pipe 75mm bore with or without ears fixed with chemical cement joints l fixed in walls complete all as specified and directed.
Supply and fixing 100mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
Supply and fixing 75mm bore bends (any radius),diminishing pieces or tapers (larger bore measured) with heel rest including oval access door complete all as specified and directed.
Supply and fixing in repair 100mm bore branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including jointing to waste pipe fixed in sement concrete 1:2:4 type B 1 with oval access door bore complete all as specified and directed. and directed
Supply and fixing in repair cast iron floor trap, 75mm dia with grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including CP gratting of suitable size complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specied and directed.
Material and labour for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces and finishing even & smooth but without using extra cement & with using integral water proofing compound complete all as specified and directed.
Supply only of Liquid water proofing compound of approved make complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar in (1:6) on other then fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick in cement mortar in (1:3) on ceiling and finishing the surface even & smooth without using extra cement complete all as specified and directed.
M & L for preparation of new plastered surafaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as per manufacturer instructions and all as specified and directred.
Material and labour for applying three coats of white wash on newly plastered or unplastered ceiling surfaces including preperation of surfaces, complete all as specified and directed.
Material and labour three coats of white wash on newly plastered surface of wall including preparation the surface of on walls complete all as specified and directed.
Material and labour for applying two coats of cement base paint over a coat of primer on newly plastered wall surfaces including cornices & pillasters etc as per manufacturer's specifications & instructions including preparation of surface, complete all as specified and directed.
Demolition of brick work or stone / boulder masonary, built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed.
M&L brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
Supply and fixing in repairs bib cock PTMT standard 15 mm dia of any colour high pressure screwed for iron pipe & fixed ( male or female as required) complete all as specified and directed.
Supply and fixing in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
Supply and fixing in repair PVC Syphon Kit (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed.
M & L 40mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement on mud phuska , incl dismantling or brick tiles or rerracing tiles single layer on roof and disposal of retrieved material out of MOD land complete all as specified and directed.
M & L 40mm thick brick tiles on mud mortar and joints grouted flush and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement on mud phuska but except brick tiles (old serviceable brick tiles to be reused after proper cleaning and washing) incl dismantling of brick tiles or terracing tiles single layer on roof etc complete all as specified and as directed.
M & L Rendering 15mm thick C:M 1:4 mixing with WPC @ 200ml/bag of cement on fair faces of concrete/brick tile surfaces on roof slab after wire brushing and cleaning top surface all as specified etc complete all as specified and directed.
M & L for cleaning of old roof top / comcrete surfaces incl uprooting all grass / plants etc & applied a coat of bituminous primer over cleaned surface Q 0.30Ltrs/Sqm followed by APP based polymeric membrance 3mm thick, minimum wt 3.00 kg/Sqm reinforced with polyester non-wove fabric (weighing not less than 150gms/Sqm) laid on primed roofs and flashing by forced application using Butance torch and sealing all joints and finished with aluminium paint @ 0.10 kg/Sqm etc complete all as specified and directed.
M & L in repair PCC 1:2:4 for PCC type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc complete all as specified and directed.
Dismantling existing broken unserviceable PVC tank of capacity 1000 Ltrs complete all as specified and directed.
Supply and fixing three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and directed.
Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .
Supply and fixing powder coated Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .
Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.
S&F 100mm size moritice lock of brass, vertival type, 4 levers, complete all as specified and directed.
S&F in repair anodized aluminium Partition powder coating of any color ( thickness of powder coating not less than 50 micron) fixed type w/o sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubbers packing, anodised aluminium snap beading, screws etc complete all as specified and directed.
S&F 12 mm prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations complete all as specified and directed.
S & F 5.50mm thick sheet glass ordinary quality and glazing with beads fixed with metal pins complete all as specified and directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed.
S & F 595x595mmx6mm thick Gypsum board laminated with PVC Sheet as in false ceiling including supply and fixing 'Tee" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed
S&F for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.
S&F hollow PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on including PVC frame including PVC beading on edges & top etc as per specifications complete all as specified and directed.
S&F in repairs white vitreous china wash down water closet pan (pedastal pattern) with and including plastic water closet seat white black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device incl flush pipe and fixing bolts ( excluding flushing cistern) etc complete all as specified and directed.
M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
Taking down shutters any description exc 1 Sqm but n.exc 2 sqm each, and refixing in the same opening including easening and adjusting complete all as specified and directed.
Taking down shutters any description exc 2 sqm each, and refixing in the same opening including easening and adjusting complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and as directed.
M & L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 etc complete all as specified and directed.
M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete etc complete all as specified and as directed.
M & L for Kota stone slab 20-25mm thick in skirting, dado and pillar laid over cement screed and jointed etc complete all as specified and directed.
M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces for reciveing Kota stone in CM 1:4 etc all complete as specified and as directed.
S & F in repair Jet spray, CP, brass body with wall hook and 1 mtr SS pipe complete all as specified and directed.Make Essco/Prayag/Cera/parryware
M/L for half brick work with sub-class 'B' bricks, straight or curved on plan exc 6m mean radius built in In cement mortar 1:4 etc complete all as specified and directed.
Material and Labour for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in cooking plateform/slab including necessary formwork and setting in mortar set in cement mortar (1:4) etc complete all as specified and as directed.
M&L for TMT bars 10 mm dia and over cut to length and bent to shape required including cranking, hooking ends and binding with and MS wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S & F 20 mm thick granite slabs for wash hand basin/ cooking slabs over 15 mm thick screed bed in CM 1:6 including moulding and nosing of corners/ edges complete all as specified and directed.
Taking down old unserviceable rolling shutter of any size upto 36 Sqm area incl hood cover complete with all accessories and making good disturbed surfaces with CM 1:4 complete all as specified and directed.
S&F Steel rolling shutter without ball bearing as specified including top cover and 1 mm thick lath anchoring rod hasp and staple and gear operated type with bevel gear box and crank handle and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed.
Taking down rolling shutter of size not exceeding 10Sqm each from any position, any location including fittings and fixtures. Repairing / replacing of unserviceable componenets and re-fixing on same opening in its original position after complete overhauing, greasing and oiling for smooth function and apply one coat of synthetic enamel paint complete all as specified and directed.
Supply only saftey lever locks of size 150mm mild steel with 4 levers with two keys for rolling shutters approved/best quality complete all as specified and directed
Supply only ball bearing for rolling shutter to match the existing complete all as specified and directed .
Supply only steel helical wire or flat spiral spring for rolling shutters to pull out the shutters including proper greasing for smooth movements/ function complete all as specified and directed .
Supply only MS pulley / wheel made with flat iron 25 x 6 mm of 160mm dia for revolving of rolling shutter in shaft complete all as specified and directed .
M&L for preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of Oil Bound distemper on walls complete all as specified and directed.
M&L for preparation of old plaster surfaces of wall by brooming down or steel wire brushing or by using mechanical sander and applying two coat of cement base paint on walls complete all as specified and directed.
Supply and fixing powder coated Anodised aluminium window side hung shutter,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
Note:- Net contract sum shall be calculated after deduction of Sch of credit.
M/S BHAGWATI CONSTRUCTION COMPANY
M/S KARTIK BUILDERS
M/s Kamal Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .