REPAIR TO DRAINAGE, CULVERT, PATH AT DHANSAL UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Demolition of cement concrete (unreinforced) in ground floor and in paving not exc.15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brick work/stone work built in cement mortar including all quoins arches, pillar etc but excl. ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for brick work with old size sub class 'B' burnt clay bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class 'B' bricks (except bricks), straight or curved on plan exc. 6 metre mean radius in cement mortar 1:6 complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching incl. weathering slightly rounded or chamfered angles as directed including necessary form work complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 using WPC as per manufacturer's instructions on brick or concrete surfaces finished even and smooth complete all as specified and directed. (Note: WPC shall be measured and paid separately)

Supply only integral water proofing compound complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement incl forms, moulds, mitred complete all as specified and directed

Add or deduct for each 25 mm girth or part thereof over or under 30cm girth in cement concrete complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6, type C-2 using 40mm graded stone aggregates as in sub base of floor, finished even and fair complete all as specified and directed.

M&L for 25mm thick sand cushioning for laying of paver blocks complete all as specified and directed. Note :- Punned thickness of sand shall be measured and paid.

S&F factory made, machine pressed precast concrete interlocking paver block any shape and size approved by EIC, ISI marked (IS:15658-2006) of 40 mm thick, M-35 grade (medium Traffic), with grey cement & pigment, complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in coping, benching incl. weathering slightly rounded or chamfered angles as directed incl. necessary form work complete all as specified and as directed.

M&L Machine pressed gloosy finish cement concrete chequered tiles of size 300x300x25mm, jointed and pointed in neat cement slurry with grey cement and pigments to match the colour of fills complete all as specified and directed.

M&L screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for two coats of cement base paint over a coat of primer incl. preparation of new plastered surfaces complete all as specified and directed.

M&L for stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and directed.

Stone walling (Except stone) of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4), complete all as specified and directed.

Extra over stone walling for hammer dressing to face granite stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses, hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc. 20mm complete all as specified and directed.

Raking out joints/ pointing to masonry or brick-work in single detached joints for flashing, etc. complete all as specified and directed.

M&L raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses complete all as specified and directed.

M&L providing pre-cast cement conrete type C-1 1:3:6 (20mm graded stone aggregate) as bonders in stone walling and set in CM 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F, mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L RCC hume pipe of dia 600 mm class NP-2 for culvert laid and jointed complete with collars complete all as specified and directed

M&L providing pre-cast cement conrete type C-2 1:3:6 (40mm graded stone aggregate) as filling of base and RCC hume pipes complete all as specified and directed.

M/S Mahajan Construction Co.

MandeepConstructionCo

M/s Vishwakarma Enterprises

Gupta Construction Company