REPAIRS TO SECURITY FENCING AND POSTS AT VARIOUS LOCATIONS AT KALIMPONG UNDER GE 867 EWS

Amount

Dismantling fencing posts (Wood, steel or RCC) embedded in concrete, any section, including taking out embedded portion and excavating in post holes for new post and removal of surplus excavated material to a distance not exceeding 50 m all as specified and directed.

M&L for plain cement concrete 1:3:6 mix, type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

S&F Fe-290 Gde E-165 mild steel angle or other sections as in posts and struts in fencing etc., and similar work including cutting tops to shape as directed,drilling holes, notching for wire, including all necessary drilling holes for bolting or riveting, etc., complete all as specified and directed by Engineer-in-charge.

S&F MS galvanised chain link fencing fixed to any type of standards, rails, posts, straining bolts etc., including provision of binding wire including dismantling of old fencing wire mesh any type complete all as specified and directed by Engineer-in-charge.

S&F mild steel machine made screw bolts exceeding 5cm and not exceeding 10cm long, 5 to 10 mm (diameter of neck) with hexagonal or square heads at one end and screwed the other, screwed end fitted with washers and one hexagonal or square nut complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel bar round bars 6 to 8 mm dia in fencing, cut to length, bent to shape required including cranking, bending, hooking ends and binding etc. conforming to grade I, IS-432 (Part I) all as specified and directed.

S&F for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm to 100mm spacing and straining and fixing to any type of standard rails straining bolts, incl securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., including dismantling old rusted barbed wire any type all as specified and directed.

M&L for factory made precast cement block masonry with solid blocks made of Plain cement concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) exceeding 10cm width and setting in cement mortar 1:6 including demolition of existing concrete block masonry complete all as specified and directed by Engineer-in-charge. Make : Shankar Saw Mills/Sangam Prefeb Products or equivalent make as approved by GE.

M&L for Providing reinforced cement concrete type B-1, 1:2:4 mix (using 20 mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts, etc., for fencing, average sectional area exc 100 Sqcm and not exc 250 Sqcm with or with out chamfered angles and flat, splayed, rounded or mitred tops and fixed complete all as specified and directed by Engineer-in-charge.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4, surface finished fair and even all as specified and directed by Engineer-in-charge.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engineer-in-charge. Make: LOVELYCEM/ SURYACEM/ JANATHACEM / LUCKYCEM or equivalent make as approved by GE.

M & L Plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to fair and even complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge.

M&L for preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer all as specified and directed by Engineer-in-Charge. Make for Item No. 13&14: ASIAN/ SHALIMAR/ BERGER/ JENSON & NICHOLSON/ IEL/ NEROLAC

Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for foundation, laying of pipe, cable etc., or for shafts, wells, cesspits, manholes, pier holes, etc., not exceeding 10 sqm on plan and getting out in soft/loose soil all as specified and directed by Engineer-in-charge.

M&L for Plain cement concrete 1:4:8 mix type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass-concrete etc., all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Removing surplus excavated soil to a distance not exceeing 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by Engineer-in-charge.

M&L for mild steel deformed TMT bars 10mm dia and above, as in reinforcement cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

M&L for mild steel deformed TMT bars 8mm dia and upto 10mm dia, as in stirrups & spacers, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as directed by Engr-in-charge.

Sub Total of Schedule 'A'

Schedule of Credit (Minus) Rs.80,910.00 B/F from Ser page No. 24(R) NOTE: Bidder shall insert credit amount as rate Rs. 80,910.00 in Green field under Col-M. If bidder does not insert the amount the same will be deducted from total amount of Schedule 'A' and accordingly total amount of tender will be considered in deciding the lowest tender.

Sub Total of Schedule of Credit

RAJU TAMANG

PRASAD PRADHAN AND SON

RAMESH GURUNG

DEEP CHANDRA JOSHI

JAYSHREE CONCERN

M/S G. K. SUTHAR

HEM RAJ GURUNG