Construction of Septic tank, sewer 110/22 KV SS at Maravanmadam in Tuticorin District

Amount

In hard stiff clay stiff black cotton hard red earth shales murram gravel stoney earth earth mixed with small size boulders and hard gravelly soil with initial lead of 10m and lift of 2m.

In soft disintegrated rock,laterite not requiring blasting.

In mediun rock and dense medium rock not requiring blasting.

PCC 1:4:8 mix using 40mm HBG machine crushed metal for foundation with out form work including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RR masonry in CM 1:6 mix using HBG stone for foundation and basement including cost of all labour materials, lead, lift, curing etc., complete. Sulpha resistance cement to be used

Brickwork in CM 1:5 mix using IInd class chamber burnt brick of size 9"x 4 1/4"x 2 3/4" including cost of all materials labour, lead, lift, curing etc., complete. Sulpha resistance cement to be used

RCC 1:1.5:3 mix using 12mm to 20mm HBS metal (machine crushed) for continous lintel, tier slab, bed blocks, cover slab for staircase, water tank slab with formwork including all cost oc labour, materials, lead, lift, curing etc., complete but excluding cost of steel reinforcement (By using mixer machine and vibrator) Sulpha resistance cement to be used

Supplying and fixing precast RCC slabs in CM 1:1.5:3 mix concrete using 12 to 20mm HBG metal for cover slabs, baffle wall including cost of all materials, lead, lift, labour, curing etc., complete.

Plastering with CM 1:3, mix 20mm thick over the flooring with smooth finish and thread lined immediately after laying flooring concrete including all cost labour materials lead lift curing etc complete.

Plastering with CM 1:5, mix 12mm thick for inside and outside walls including all cost labour materials lead lift etc complete.

Supplying and fabricating and placing in position MS/RTS (ACR) steel reinforcement for RCC works including labour for cutting bending tying and Fixing in position as per specification including cost all materials, lead, lift, cost of binding wire etc., complete.

Manufacturing and fixing in position of anodised aluminium glazed door using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with everite/ Poineer floor gear glazing clips rubber beadings hinges handle 5mm thick CGL make cooling glass including cost of materials labour lead lift etc complete. Door size 1.20 x 2.40m (single leaf).

Manufacturing and fixing in position of anodised aluminium glazed sliding window of size 2.20 x 1.20m as per ISS 1038-1958(1245 ISS) using 50x50x2mm and 25x25x2mm section glazing clips rubber beadings hinges handle 4mm thick sun cool glass pannelling, alu. grill including cost of materials labour lead lift etc complete.

Manufacturing and fixing in position of anodised aluminium partially glazed door using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with glazing clips rubber beadings hinges handle, hydraulic door closer etc & bottom with 12mm thick one side laminated MDF duratuff exterior Board and top with 5mm thick CGL make cooling glass etc complete single leaf of door size 1.0x2.20m.

Manufacturing and fixing in position of anodised aluminium panneled door using 100x44x2mm box section for frame and 95x44x2mm for shutter bottom style and 65x44mm section for other side style with glazing clips rubber beadings hinges handle with 12mm thick one side laminated MDF duratuff exterior Board single leaf of door size 1.0 x 2.20m.

Supplying and fixing PVC door shutter made of chamber hallow plastic sections of size 200mmx20mm thick and PVC extracted shutter frame of size 24mmx50mm including necessary hard make PVC shutters including cost of oxidised aluminium fittings as per drawing and specification including cost of all materials lead lift etc complete. size 0.80 x 2.00m

Supplying and fixing of steel ventilators of size 0.75x0.45m fully glazed louver type as per standard specification with MS angle 35x35x5mm for frame and glass 4mm thick including providing 12mm dia bar including cost of all materials lead lift etc complete as per standard drawing and specn as well as as per the direction of Engineer at site. Ventilator of size 0.75x0.45m.

Supplying and fixing 600x450mm mirror including all cost of materails lead lift etc complete.

Supplying and fixing of wash basin of size 500x400mm of approved quality Neycer/ Parry ware including cost of wash basin with pedestal cock fixing with rug bolt and nuts, 15mm dia PVC connecting hose and outlet using 40mm dia PVC waste pipe , CP valve, tap etc complete.

Providing inspection chamber of size 0.60 x 0.60 x 0.60m to a max depth of 0.90m with CI manhole cover including all cost of materails lead lift etc complete.

Supplying and fixing of 110 mm dia PVC pipe including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC bend including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC TEE including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of 110 mm dia PVC pipe of 3m height with cowl for ventilation shaft including cost of all materials, lead, lift, labour for fixing etc., complete.

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size 90cm and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete

Supplying and fixing of PVC shower and Nickle control valve complete

Supplying and fixing in position of 15mm dia brass screw down bib cock of best quality including cost of materials lead lift labour etc complete.

Supplying and fixing musical quartz type wall clock of size 30cm in dia of approved quality such as Ajantha/Seiko/Citizen etc including cost of transport fixing charges etc complete.

Supply and fixing of 4'x36W single industrial type flu. fitting complete with Electronic choke and condenser with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube. (SD 87)

Supply and fixing of 18 W CFL point. (SD 77)

Supply and fixing of Stree light fitting with CFL with complete set

Supply and fixing of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD 112)

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/ usha/bajaj including cost of all materials lead lift etc complete.

Colour washing two coats with approved cement paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats with approved exterior emulsion over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats with Oil Bound Distember over one coat of white cement primer for inside wall including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats with water based plastic emulsion over one coat of white cement primer for inside wall including cost of all materials, labour, lead, lift etc., complete.

White washing two coats with best quality of shell lime and robin blue bigments over primer coat for ceilings, beams, slabs and sunshades including cost of all materials, labour, lead, lift etc., complete.

Painting two coats to the all exposed faces of steel works over one coat of primer with approved enamel paint including cost of all materials, lead, lift etc., complete.

Supplying and filling with 40 mm metal as per STD specification including cost of all materials, lead, lift etc., complete for dispersion trench.

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) S Type chair (Local rate)

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Three drawer steel table

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Steel side rack open type 4 self

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Steel half bench

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) Operator Table 6'x5'

Supplying steel furniture manufactured by TANSI or any other ISI make including cost of all materials, labour, lead, lift etc., complete (Sample to be approved by Department Engineer) PVC Chair of reputed make

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

S.RADHAKRISHNAN

GANAPATHY AND CO

KUMAAR ENTERPRISES