REPAIR MAINT TO PLUMBING SANITARY FITTINGS IN SINGLE OFFRS JCOS ORS ACCN IN ZONE A AREA INCLUDING REPAIR REPLACEMENT OF GI PIPE LINE AND ALLIED WORKS FOR EXTERNAL WATER SUPPLY AT GMS UNDER GE I GOS

Amount

S&F in repair PVC waste pipe for WHB etc complete all as specified and directed.

S&F in repairs 32 mm bore dia waste coupling of (min weight 32 gm - 45 gm of PTMT) (half or full threaded) etc complete all as specified and directed

S&F in repair CP grating 100 mm bore with waste hole (minimum weight 40 gm) complete all as specified and directed

S & F in repair CP Jet spray for 15 mm bore complete all as specified and directed.

S & F in repairs Hand shower (Health faucet) with 1 mtr long Easy flex tube in crome finish & wall hook complete all as specified and directed.

S & F in repair bottle trap chromium plated for WHB as per approved quality complete all as specified and directed.

S&F in repairs for vitreous china wash basin, white,flat back, size 550 x 400 mm including supply & fixing of brass chromium plated coupling 32 mm etc complete all as specified and directed.

S&F in repair Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs plastic water closet seat cover, closed pattern with recessed bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs vitreous china squatting pan , ‘Orissa’ Pattern, size 580 X 440 mm white, with integral foot rests etc. complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litre capacity hoisted and fixed in position including dismantling of old u/s water tank and removing to store complete all as specified and directed

S&F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 1000 litre capacity hoisted and fixed in position including dismantling of old unsv water tank and removing to store complete all as specified and directed.

S&F ball valves for 20 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F ball valves for 25 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S&F in repairs ball valves for 20 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gms) complete all as specified and directed.

S&F in repairs ball valves for 25 mm bore of pipe high pressure of PTMT with Epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 gms) complete all as specified and directed.

S & F in repair PVC Tank cover for 500 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

S & F in repair PVC Tank cover for 1000 Ltr capacity fixed in position with nuts and bolt complete all as specified and directed

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of washer only for 15 mm bore size without replacing spindles complete all as specified and directed.

Taking down bib tap /wash basin tap/pillar tap/stop cock/mixture tap and refixing the same after repair and replacement of spindles for 15 mm bore size complete all as specified and directed.

S&F in repair Chromoium plated Bib taps 15 mm bore fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Chromoium plated fancy type angular stop cock for 15 mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Chromoium plated Two-way angular stop cock for 15 mm bore complete all as specified and directed.

S&F in repair, 15 mm bore stop cock, cast copper alloy with long shank and cup (concealed type) fancy type chromium plated screwed down high pressure with crutch & butterfly handle screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm bore stop cock, cast copper alloy screwed down high pressure with crutch & butterfly handle fancy type chromium plated screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure with or without lettered hot or cold with long screwed shanks and ply nuts 15 mm dia complete all as specified and directed.

S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed.

S& F in repair 1 mm thick stainless steel plate rack of size 900X750X200 incl fixing with rawal plug and screws complete all as specified and directed.

S & F in repair Toilet Paper Holder with Flap complete all as specified and directed.

S&F in repair Single door PVC cabinet mirror of size 300 mm x 450 mm with internal shelves complete all as specified and directed.

S & F in repair sheet Glass Shelf assembly consisting of 5.5 mm glass sheet shelf 12 cm wide with cromium plated bracket guard and railing 60 cm long complete all as specified and directed..

S & F in repair Brass chromium plated wall mixer non-telephonic shower arrangement with connecting legs & wall flanges for 15 mm bore of pipe complete all as specified and directed.

S & F in repair Brass chromium plated hole bidet mixer (Basin mixer) with pop-up waste system with 300 mm long braided hoses complete all as specified and directed.

S & F in repair Brass chromium plated Sink mixer with raised J shaped swinging spout (Wall mounted model) with connecting legs & Wall flanges complete all as specified and directed.

S&F in repairs, PVC valveless syphonic action type low level flushing cistern, 10 ltrs capacity with inlet, ball valve, float and handle including bracket complete all as specified and directed.

S & F in repair internal fitting for low level flushing cistern (Syphon) complete all as specified and directed.

S&F in repairs flush pipe 32 mm dia of polyethylene of low or high density or PVC, for low level cistern complete all as specified and directed.

S & F in repair 125 mm dia chromium plated shower rose of with or without swivel joint incl fixing to steel pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm bore, 450 mm long complete with both ends unions complete all as specified and directed.

S&F in repairs CP anodised tubular tower rail, 20 mm dia, D type, 60 cm long between flanges etc complete all as specified and directed.

S & F in repair 75 mm PVC(SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore of pipe complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends (ISI marked) for iron pipe of 25 mm bore of pipe complete all as specified and directed.

S & F in repair Soap dish any type fixed to plug with chromoium plated brass screw complete all as specified and directed.

S & F in repair corner glass shelf with brackets complete all as specified and directed.

S & F in repair double coat hook complete all as specified and directed.

S & F in repair chromium plated towel ring with bracket complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in Bricks/ stone Masonary wall complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade (ISI marked) with all fittings fixed complete to walls, ceilings or laid in floors of 20 mm bore of pipe complete all as specified and directed.

S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified and directed.

Making connection of PPR distribution branch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 15 mm bore of pipe complete all as specified and directed.

Refixing old steel tubing and connections in new or old position (wall, floor, ceiling etc) of 20 mm bore of pipe complete all as specified and directed.

Excavation in trenches in any type of soil n.exc 1.5 M wide and n.exc 1.5 M in depth for taking out/laying of pipe lines and getting out forming bottom surfaces to required gradients complete all as specified and directed.

Returning, filling in and including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed

Removing excavated surplus materials to a distance not exceeding 50 Mtrs and deposited where directed at a level not exceeding 1.5 Mtr. above the starting point complete all as specified and directed.

Taking up or down existing GI/CI/DI pipe line 100 mm dia and connection in new or old position (walls, trenches, ceiling and floors etc.) complete all as specified and directed.

All as per Item No 62 above but GI pipe line 90 mm bore.

All as per Item No 62 above but GI pipe line 63 mm bore.

All as per Item No 62 above but GI pipe line 50 mm bore.

All as per Item No 62 above but GI pipe line 40 mm bore.

All as per Item No 62 above but GI pipe line 32 mm bore.

All as per Item No 62 above but GI pipe line 25 mm bore.

S&F 3-layer PP-R polypropylene random copolymer concealed pipe (PN 16/SDR 7.4) UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings, floors or in trenches etc of size 110 mm OD complete all as specified and directed.

All as per Item No.69 above but of size 90 mm OD.

All as per Item No. 69 above but of size 63 mm OD.

All as per Item No. 69 above but of size 50 mm OD.

All as per Item No. 69 above but of size 40 mm OD.

All as per Item No. 69 above but of size 32 mm OD.

All as per Item No. 69 above but of size 25 mm OD.

S&F in replacement of sluice valve 100 mm bore class PN-1.6 with flanged and iron wheel head, shut and open directed cas on it and including jointing materials, rubber gasket suitable size nut bolts and washer etc complete all as specified and directed. Make: Upadhay/Zoloto/Kirloskar or equivalant of higher cost.

All as per Item No. 76 above but 80 mm bore.

S&F in repair PP-R gate valves (brass inlet) as per requirement of size 63 mm OD complete all as specified and directed.

All as per Item No. 78 above but 50 mm OD.

All as per Item No. 78 above but 40 mm OD.

All as per Item No. 78 above but 32 mm OD.

All as per Item No .78 above but 25 mm OD.

S&F in replacement and making connection of PP-R distribution branch with PP-R main of size (16 to 40mm) by providing and fixing tee including cutting and making fusion joint etc as per required at site.

S&F in replacement and making connection of PP-R distribution branch with PP-R main of size (50 to 75 mm) by providing and fixing tee including cutting and making fusion joint etc complete all as specified and directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142 gms/ 20 mm-210 gms./ 25 mm-455 gms/ 40 mm - 690 gms) of size 20 mm dia complete all as specified and directed.

All as per Item No. 85 above but of size 25 mm bore.

M&L painting to MS/Steel surface in any description as required in ground after preparation of old surface with two coat of anti corrosive paint over one coat of zinc chrome primer as per colour code complete all as specified and directed.

S&F in repair mild steel work for angles supports clamps, fabricated from structural steel section including nuts,bolts, washers welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat one under coat and one finishing of paint including taking out existing unserviaceble MS work of open well channel and MS ladder etc complete all as specified and directed.

Taking down / removal of any damaged water point line from the position and connecting the pipe line 15 mm/20mm/25mm bore by providing new GI nipples, GI unions and GI sockets including exacavation and earth work , filling & good distributed surfaces complete all as specified and directed.

M&L cutting hole in RCC service tank removing rusted GI nipple of any size, providing new GI nipple of same size of providing pipe, making good to service tanks, making service tanks leak proof complete all as specified and directed.

Boring across the road/hard surface with machanical boring equipments not less than 80 mm bore complete all as specified and directed.

Dismantling of old unserviceable and M & L for Construction of Brick masonry valve chamber of size 600x600x600mm (internal dimension) chamber depth to be reckoned from the top of PCC foundation to top of brick wall, including PCC1:4:8 type D2 in foundation PCC 1:2:4 type B1 in coping, brick work in cm 1:4, plaster 15 mm thick in CM 1:4 flush pointing externally as the work proceeds, MS Sheet cover 3.00 mm thick with handle and locking arranging and angle iron frame of size (25 x 25 x 5 mm) including painting with two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed

M/s Bapujee Builders and Traders

M/S K MURALIDHARA PATRA

M/s Ats Electricals

R K Traders

HARAGOURI SUPPLIERS

M/s MAA BHAIRABI ENTERPRISES

G.KRISHNA MURTHY AND PARTNERS