PROVN OF CERTAIN SRW AND MINOR WORKS UNDER GE AWC MHOW.

Amount

M & L for Cement concrete foundation filling and mass concrete type D-2 1:4:8 (40mm graded Aggregate)

S & F for MS angle iron Hand rails, including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165

M & L cement concrete Type B-1 1:2:4 (20mm graded Aggregate) in bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including neccecery formwork as directed

S&F IInd class hard wood 35mm thick Factory made plain framed panelled shutter any number of panels of with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I), kiln seasoned and chemically pressure treated.

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20mm width stuck inside with solvent cement for tiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement supplying & fixing in the frame at site all as specification and drawing for item No 879 in SSR part II 2004

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforsed with M\S squre tube supplying and fixing in opening as per specification & drawing

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.barrel tower bolts of extruded sections complete all as specified and directed.

S&F Aluminium handle 150mm long complete.

S&F butt hinge size 100mm extruded Aluminium alloy with galvanised mild steel hinges pin,anodised and fixed type

M&L for preparation of new wooden surfaces of any description not otherwise described over 10cm width or girth priming coat with pink primer and applying two coat of sythentic enamel paint all specified.

M&L preparation of new steel surfaces of any discription over 10cm width or girth not otherwise described and apply two coat of synthic enamel paint over one coat of red oxide primer

M&L for cement plaster 15mm thick in CM 1:4 on stone wall etc finished even and fair with mixing WPC as per manufacturer intructions. The WPC shall be paid supply only rate under respective item.

M&L for cement plaster rendering 15mm thick in CM 1:6 on fair faces of brickwork or concrete surface as on wall finished even and smooth with thin layer of sagol complete all as specified and directed.

Supply only Integral waterproofing compound

M&L for prepation of new plastered suface of walls and applying one coat of primer and two coat of cement base paint on walls all as directed by Engr-in-Charge

S&F coloured glazed cermic tiles size 300x450x7 mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 on stone wall/concrete surface/brick wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the tiles.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles and including 15 mm thick screed bed in CM 1:6

M & L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering

M & L Cement concrete Type C2 1:3:6 (40mm graded stone aggregate) 100mm thick

M & L Hardcore of broken stone or boulders guage exc. 63 mm but n exc. 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled / rammed to a true surface

S&F in repairs fancy type cromium plated bib tap 15mm bore cast copper alloy with crutch or butterfly handles, screwed down screwed for iron pipe or for brass ferrule and fixed all as directed by Engineer-in-Charge

S & F Tubes, 'medium grad', galvanised, with all fitting; laid in trenches 20mm bore

S & F Tubes, 'medium grad', galvanised, with all fitting; laid in trenches 15mm bore

S & F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S & F 110mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 75mm dia PVC (SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F for PVC (SWR) bends with access door any radius 110mm bore complete all as specified and as directed

S & F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

S & F for PVC (SWR) branch piece, double 'Y equal or unequal 110mm bore complete all as specified and as directed

S & F for PVC (SWR) branch piece, double 'Y' equal or unequal 75mm bore complete all as specified and as directed

M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard / dense soil complete all as specified and as directed.

M & L Granite (of any type) tiles / slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 20mm thick in CM 1:6

M & L Granite (of any type) tiles / slab 20mm thick machine cut, in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed 15mm thick in CM 1:3 complited all as specified and as directed.

Rounding to edges of stone slabs one edge / nosing such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S& F in repair angle cock copper alloy chromium plated fancy type screwed down high pressure fixed with iron pipe or ferrule directed by Engineer in charge.

S&F in repair PVC flushing cistern 10 ltr capacity high / low level white with inlet ball valve float and handle including bracket complete

S & F brass CP towel rail, 20mm dia, D type, 60 cm long between flanges fixed in repairs complete all as directed.

S&F in repair vitreous china wash basin water closet padestal pattern white with 'P' or 'S' trap including PVC white seat cover.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Removing excavated material n exc. 50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required all as specified and directed complete.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates and similar work complete all as specified and directed.

M & L Cutting chases, pinning in.stone concrete block or slab walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed complete.

Supply only liquid water proofing compound as specified.

Surface excavation n. exc 30cm depth and averaging 15cm deep and getting out in soft/loose soil.

M&L for 150 mm spread thick soling with broken boulders or quired stone, interstices filled , surface formed and rolled and consolidated to required gradient and camber.

Rolling to Soling of broken boulder or quirried stone n.exc. 15 cm thickness using 8 to 10 ton Power roller

M&L PCC (1:4:8) D-2 40mm graded aggregate in sub base 150 mm thick

Prepainted galvalume aluuminium zinc cooting GI based plans teeel sheet 0.50mmthick ofany cluynr havening tensile str of 550MP as in roof covering cladding to wall fixed with self tappering screws as required

M&L Cement concreate type B-0 1:2:4 12.5mm grade aggregate finishing cement concret surface even and smooth 40mm thick

Exavation in post hole or smilar holes each n exe 0.5 cum, getting out in ramming earth or broken rubble mixed with earth around in layers n exe 25 cm watering and removing surplus soil to a distance n exe 50 m and making good surface in soft /loose soil

S&F roof trusses(framed), trussed, posts, purlins, ratters, crane grantries, railes and fastenings and heavy bracket framing (Beam, tee, angel channel or flat sections) including distance piece cleat etc

M/S Ashish Construction