Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.1 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹26.3 L+₹1.9 L (7.91%)Rejected-Finance 01 SARIYAPUR NAUBASTA LALGANJ PRATAPGARH UTTAR PRADESH 230129 | PRATAPGARH | UTTAR PRADESH | 230129 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹27.6 L+₹3.3 L (13.4%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹32.5 L+₹8.1 L (33.3%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹36.1 L+₹11.7 L (48.1%)Rejected-Finance D BLOCK D 57 BARRA 8 BARRA 8 BARRA 8 KANPUR NAGAR UTTAR PRADESH 208027 | KANPUR NAGAR | UTTAR PRADESH | 208027 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
27 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) GORAKHPUR
GE(AF) GORAKHPUR PIN-273008
COMPREHENSIVE MAINT AND DAY TO DAY REPAIRS INCLUDING SMART PERIODICAL SERVICES OF HANGERS (PREFERABLY THROUGH AUTHORIZED OEM) AND BUILDINGS AND E/M INSTALLATIONS AT 274, 756 SU MES AREA AT AF STN GORKHPUR
2022_MES_550823_1
8937/E8
Open Tender
Civil Works
Item Rate
GE(AF) GORAKHPUR
As per tender Documents
8 documents required · 8 mandatory
₹500
GE(AF) GORAKHPUR
₹60,000
Yes
22 Oct 2022
8 Sept 2022
28 Sept 2022
8 Sept 2022
27 Sept 2022
15 Sept 2022
Amount
M&L preparation of old plastered/unplastered surface of wall and applying one coat of white wash complete all as specified and directed.
All as per item No. 1 above but two coats of white wash.
M&L preparation of old plastered/unplastered surface of ceiling and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old distempered surfaces of wall pilasters, cornices etc by washing, rubbing down and stopping etc and applying one coat of oil emulsion distemper applying distemper with roller complete all as specified and as directed.
M&L preparing old decorated surfaces of wall by washing, rubbing down and stopping of painted surfaces and applying one coat of cement base paint complete all as specified and as directed.
All as per item No. 5 above but two coats of cement base paint.
M&L for preparation of old painted surface of wood and wood based material of any description area exc 10cm width or girth and applying one coat of synthetic enamel paint as directed.
M&L for preparing old painted surface of steel or iron of any description area exceeding 10cm width or girth and applying one coat of synthetic enamel paint all as directed.
M&L for one coat of exterior emulsion paint over old decorated surface of wall including preparation of surface of wall complete all as specified and as directed.
M&L for bee hives from overhead tank structure with adopting all safety measures at upto including 13.00 mtrs height complete all as specified and directed.
M&L for complete removal of existing treatment by washing, rubbing down and stopping old surfaces of wall including scrapping and applying two coats of oil emulsion distemper over a coat of 1mm thick Birla putty as base coat complete by using mechanised equipments as smart periodicals all as specified and as directed.
M&L for preparation of old painted camouflage pattern surface on walls and applying one coat of exterior emulsion paint in same pattern by using mechanised equipments as smart periodicals all as specified and as directed.
Taking down cement or cement lime plaster any description including racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick wall/ concrete surfaces and finished even & smooth without using extra cement complete all as specified.
M&L for rendering 15 mm thick in cement mortar 1:4 on any face of brick walls/ concrete surfaces finished even and smooth without using extra cement mixed with liquid WPC @ 3% by weight of cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately
Supply only liquid water proofing compound.
M&L for rendering 5mm thick in CM 1:4 on fair faces of brick/concrete surfaces of ceiling and finished even & smooth without using extra cement complete all as specified.
M&L for preparing new plastered surface of wall and applying three coats of white wash as directed.
M&L for preparing new plastered surface of ceiling and applying three coats of white wash as directed.
M&L for preparing new plastered surface of wall and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparing new plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified and directed.
Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed.
M&L for brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.
Taking up or down steel tubing and connections 15mm bore complete all as directed.
All as per item No. 24 above but 20mm bore.
S&F 15mm bore steel water tubes "medium grade" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed.
All as per item No. 26 above but 20mm bore.
Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed.
All as per item No. 28 above but 20mm bore.
S&F in repair 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.
S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.
S&F in repair rotational moulded polythylene water storage tanks 500 ltr capacity triple layered ISI marked (cylindrical vertical with closed top ) hoisted and fixed in position complete with ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 15mm bore (Minimum weight 142 gms) complete all as specified and directed.
M&L for mild steel flat iron for caging of PVC water storage tank of any size and similar work including locking arrangement of and necessary cutting, welding, bolting, bending, jointing complete all as specified and directed.
S&F in repair bib tap 15 mm bore brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed.
S&F in repair stop valves 15mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union. complete all as specified and as directed.
S&F in repair for 15mm bore stop valves fancy type chromium plated with long shank and concealed type screwed down high pressure with crutch handle complete all as specified and as directed.
S&F in repair stop valves 20mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union. complete all as specified and as directed.
S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 15mm bore (Minimum weight 142 gms) complete all as specified and directed.
All as per item No. 39 above but of 20mm bore (Minimum weight 210 gms).
S&F in repair Vitreous China water closet squatting pan, 'Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed.
S&F in repair vitreous china wash hand basin white flat back size 550x400 mm including two Nos bracket, complete all as directed.
S&F in repair Vitreous china wash down water closet pan (pedestal pattern) with any type of 'P' or 'S' trap excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device. complete all as specified and as directed.
S&F in repair CP soap dish/tray fixed with wall complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450 complete all as specified and directed
S&F in repair PTMT grating doom 125mm dia complete all as specified and directed.
S&F in repair PVC 10 Ltrs valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed.
M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.
S&F in repair for 15mm bore stop valves fancy type chromium plated and concealed type screwed down high pressure with crutch handle complete all as specified and as directed.
S&F in repair vitreous china urinal half stall size 590x390mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.
S&F in repair urinal spreader of PTMT of any colour for fixing with 15mmdia pipe complete all as specified and directed.
S&F in repair stainless steel sink with drainage board made out of 1mm thick steel sheet for kitchen with plug, washer waste pipe, MS cantilever bracket, connection union overall size 915x460mm with bowl size 410x310x160mm complete all as directed.
Taking down chawkhats or frame with shutter (without taking out shutter from the frame n.exc 1.50 Sqm each and removing from site complete all as specified and directed.
All as per Item No. 54 above but exc 1.50 Sqm and n.exc 4 sqm each.
Taking down shutter of any description n.exc 1 Sqm each and removing from site complete all as specified and directed.
All as per item No. 56 above but exc 1 Sqm and n.exc 2 sqm each.
S&F 2nd class hard wood (sal) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete as directed.
M&L for second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/gauge etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I (2009)
M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, with sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(b) of SSR part-I (2009)
M&L for 35 mm thick IInd class hard wood plain framed, paneled shutter (two panel or more) with lock rails and panel of 9 mm thick B.W.P. commercial ply or 12mm veneered particle board with commercial veering on both faces. The size of rail and style as per I.S. 1003(Part-I) 2001 complete all as specified and directed.
M&L for preparing surfaces of chowkhat of new or old, of any description and girth not otherwise described, treating ends of posts, back of chowkhats, etc area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed.
M&L for Preparation of surfaces of wood and wood based materials, steel and iron work, new or old, of any descriptions and girth, treated with tar or coal tar black paint to treating small articles such as stop, covers, gully gratings, hold fasts, ends of posts, backs of chowkats etc area n exc 0.1 Sqm complete all as specified and directed.
S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.
S&F 30mm thick flush shutter, factory made, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.
S&F 200 mm long aluminium anodized barrel tower bolt, complete all as specified.
S&F aluminium anodized pressed handle, cast type of size 150mm, complete all as specified.
S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as directed.
M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F steel windows, ventilator with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
All as per item No. 71 above but without glazing bars.
S&F prelaminated particle board, 18/19 mm exterior grade, prelaminated two side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
S&F 100mm size mild steel hasp and staple stove enamelled black including bolt to hinge plate and fixed with screws complete all as directed.
S&F continuous piano type hinges MS bright finished or electro galvanised width of flap 30mm all as specified.
S&F in repair 200mm long aluminium anodized barrel tower bolt, complete all as specified.
S&F in repair 150 mm long aluminium anodized barrel tower bolt, complete all as specified.
S&F in repair aluminium anodized pressed handle, cast type of size 125mm, complete all as specified.
S&F in repair aluminium anodized pressed handle, cast type of size 150mm, complete all as specified.
S&F 250 mm long mild steel sliding door bolt, plate type, stove enamalled black with bright bolt not less than 12mm dia with and including a minimum 6 bolts & nuts, four on bolt plate and two on staple plate complete all as specified and as directed.
S&F in repair curtain rod/ rail with steel rod fancy type 20 mm dia complete al as specified and directed.
S&F in repair for bracket for curtain rod complete al as specified and directed.
S&F mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of water tanks etc ant type of work conforming to Fe 290, grade E-165 complete all as directed.
S&F mild steel framed work as in door or gates of angle or other sections with gusset plates, rails, braces etc, as in cattle traps, U channel for framed work, reinforced hinges, with ends of bars shoulders, framed guard bars and similar works complete conforming to fe 410-W (Gde E-250) quantity 'A' complete all as specified and as directed.
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, galvanised wire staples fixed in wooden/steel frame complete all as specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, galvanised wire staples, complete all as specified and directed.
Taking down of old steel door rolling shutter of area not exceeding 15.00 Sqm each of any description and re-fixing the same in the same opening after repairing by greasing ,oiling including one coat of synthetic enamel painting, welding, forging, riveting, greasing, oiling including changing of members/spare parts as required complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
Demolition of cement concrete un-reinforced in ground floors and paving not exc 15 cm thickness below or above ground level complete all as specified and as directed.
M&L for 40mm thick PCC 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate as in floor finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for 100mm thick PCC 1:2:4 type B1 using 40mm graded mechanically crushed stone aggregate as in hardstand ding/pavement finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all specified and directed.
S&F non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm and n.exc. 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
S&F Glazed ceramic coloured tiles in vertical surface 300x200x7mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
M&L for 20 mm thick granite (of any type) (work table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms etc fixed in CM 1:3 and pointing with white cement 1:2 using marble dust admixture to pigment to match the surface complete all as specified and directed.
Dismantling asbestos cement plain or corrugated sheeting incl ridges any gauge/thickness nainital or similar pattern as in roof covering complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting incl ridges any gauge/thickness nainital or similar pattern as in roof covering complete all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/ blankets, any thickness, including cover filets complete all as specified and directed.
S&F mild steel work as in hold fast, handrails, balasters, nosing to steps incl embedding in concrete, wind tie for roof, post shape incl all necessary drilling, bolting & riveting etc & similar work conforming to fe-290 Gde E-165 complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixing with self tapping screws complete all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick (BMT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixing with self tapping screws complete all as specified and directed.
S&F for 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type or cranked hook bolts complete all as specified and directed.
M&L for aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I. wire (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expansion hold fasteners 12.50mm dia 40mm long complete all as specified and directed.
M&L for non asbestos 4mm thick fiber cement building boards fixed or laid/inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping complete all as specified and directed.
Repair/easing/readjusting of aluminium door/ window shutters by taking down shutters from frame and dismantling members of shutters like, glass, rails and style by necessary cutting, grinding of members etc and refixing same including rubber gasket, hinges, handle screws etc complete all as specified and directed.
M&L anodised aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 4 mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed .
S&F aluminium chequered grill weight exc 2.5 kg and n.exc. 3.5 kg per sqm with all fittings & fixture complete all as specified and as directed.
M&L anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50 mm and bottom rail150.00X 44.50 X 2.50 mm and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortise lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stopper 01 Nos, jointing cleats, glazing cleats, rubber packing , anodised aluminium shape beading, screws etc with paneling in two parts with 12mm thick prelaminated particle board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc. complete all as specified and directed.
S&F in repair aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.
S&F in repair aluminum handle American type anodized size 150 mm long, complete all as specified and directed.
S&F in repair 5.5mm thick, sheet/ tinted glass, ordinary quality to be fixed with aluminium beading and rubber gas kit in aluminium frame work as in door/ window/ partition etc complete all as specified and directed.
M&L for 4mm thick both side aluminium decorative sheet laminated partition panel for fixing in aluminium door shutters by taking out old ply/ board from existing aluminium door shutters complete all as specified and directed.
S&F in repair aluminum glazing clips / beading for aluminum door and window, complete all as specified and directed.
S&F in repair rubber gasket for packing/ beading for aluminum door and window, complete all as specified and directed.
S&F mild steel rolled work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.of Fe-410 W (grade E-250) quality-B complete all as specified and directed.
Dismantling wrought iron or MS work of any description not otherwise provided for complete.
M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of concertina coil 600mm dia any shape including razor wire of six link etc complete all as specified and directed. Note:- Concertina coil and six link razor wire shall be measured as one RM.
Fixing only existing serviceable concertina coil and razor blade complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling or mass concrete complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as directed.
M&L for chequered cement concrete tiles 20cmx 20cmx 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment including screed bed 20mm thick in CM 1:6 complete all as specified and directed.
M&L for 60-62mm thick, rubber moulded precast concrete interlocking tiles M-35 grade, factory made, over and including 30mm thick sand cushioning and joints filled with fine sand incl leveling tamping & sweeping complete all as specified and directed.
S&F 250mm long aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
M&L for complete removal of existing treatment by washing, rubbing down and stopping old surfaces of wall including scrapping and applying two coats of exterior emulsion paint camouflage pattern over a coat of primer upto 6.5 mtrs height complete by using mechanised equipments as smart periodicals all as specified and as directed.
M&L for complete removal of existing treatment by washing, rubbing down and stopping old surfaces of wall including scrapping and applying two coats of exterior emulsion paint camouflage pattern over a coat of primer more than 6.5 mtrs height to upto 13.0 mtrs height complete by using mechanised equipments as smart periodicals all as specified and as directed.
S&F 4mm Sheet glass in metal frame, ordinary quality n exc 0.5 sqm in each pane complete all as specified and directed.
M&L for machine cut Pre Polished Kota stone slab 18 to 20mm thick (minimum size 30cmx45cm) as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.
M&L for machine cut pre polished Kota stone slab 18 to 20mm in thick single piece in stair case as in skirting/ dado or on vertical surfaces laid over and including cement screed bed 10 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified and directed.
GANGA TRADERS
M/ s J S Kapoor And Sons
M/S NITISH ASSOCIATES
M/s Pandey Trading Company
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .