ADDITIONAL WORK FOR WARUD VILLAGE (UNDER PIPRI AND 13 VILLAGES RRWSS) TO BE TAPPED FROM SEWAGRAM AND 5 VILLAGES RRWSS UNDER DISTRICT MINING FUND

Item No. 01 :- Excavation for foundation / pipe trenches in earth soil, of all types sand grael & soft murum, hard murum, soft rock and old cement and lime masonry foundation asphalt road etc including removing the excavated material upto a distance of 50 Metres and lifts as below, stacking and spreading as directed manual dewatering, preparing the bed for foundation & excluding backfilling etc.complete.

Item No. 02 :- Providing D.I. pipes (push on joints pressure pipes of D.I. of following class and diameters confirming to the I.S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality) excluding GST levied by GOI & GOM in all respet including Third party inspection charges of TPI agency approved by MJP, including transit insurance, railway freight, unloading from railway wagon, loading into truck, Transportion to departmental store unloading, stacking, etc.completed, as directed by engineer-in- charge.(IS-8329:2000 latest version for pipes and IS 158/1969 and IS 12820/1989 or Latest edition / revision with amendments for Rubber Gasket (IS:8329:2000 latest version}

200 mm dia. DI K7

Item No. 03 :- Providing and supplying ISI standard D.I. specials and fittings with sealing rubber gasket of S.B.R. complete with Cast Iron follower gland and M.S. nut bolts coated or otherwise protected from rusting and suitable for D.I. pipes including cost of labour, material and transportation to stores, loading & unloading excluding GST levied by GOI & GOM in all respect etc.complete as per IS-9523.

80 TO 300 MM DIA

Item No. 04 :- Lowering laying and jointing with SBR ruber gaskets D.I. S/S pipes of various classes with DI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber rings labour, etc. complete. . Note : Only SBR Rubber gaskets to be used as per IS-5382 and IS-12820

200 mm dia. DI K-9 Pipe

Item No. 05 :- Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. The rate under this item shall also include cost of retesting, if necessary and reinstating to original position using water supplied by the conrractor.

200 mm dia. DI K-9 Pipe