Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical ACCEPTED |
| 2 | Accepted-Technical | Accepted-Technical ACCEPTED |
| 3 | Accepted-Technical VILL P O HATWAS TEHSIL NAGROTA BAGWAN DISTT KANGRA HP | Accepted-Technical ACCEPTED |
Tender Value
₹5.5 L
EMD Value
₹10,983
Closing Date
30 Mar 2026, 1:30 pmClosed
EXECUTIVE ENGINEER
JAL SHAKTI DIVIISON CHOWARI
Providing LWSS for Sihunta and Other Multi villages Rural piped WSS for the part of Block Bhattiyat Distt Chamba HP SH Providing and making distribution manifolds and by pass arrangement of 20 Nos Tank. Balance work
2026_HPIPH_132231_1
NIT NO 21597-21696 DATED 20-03-2025
Open Tender
Civil Works - Water Works
Item Rate
60 days
CHOWARI CHAMBA HP
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
₹10,983
2 Jun 2026
23 Mar 2026
30 Mar 2026
23 Mar 2026
30 Mar 2026
23 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation in foundations trenches etc. in earth work in all kinds of soil such as pick work, jumper work, blasting work in hard/ soft rocks, chiseling / wedging out of hard /soft rock including dewatering in saturated soil up to all leads and lifts stacking the excavated soil / materials not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15 centimeter layers when required into plinths side of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts as per the direction of Engineer-in -Charge. | |||||
| 2Providing and laying cement concrete 1:3:6 (1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charge. | |||||
| 3Providing form work with steel plates 3.15 millimeter thick welding with angle iron in frame 30x30x5 millimeter, so as to give fair finish including centering, shuttering strutting and propping etc. with wooden battens and bellies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for in-situ-reinforced concrete and plain concrete work in:- | |||||
| 4Vertical surfaces such as walls (any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like within all leads and lifts as per the direction of Engineer-in Charge. | |||||
| 5Fixing of Fencing Pannel size 1.80x1.20 wide in brick pillars within all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. | |||||
| 6Manufacturing & supply & Fixing fencing panel of size 1.80 x1.20 meters of jali 25 x25 mm welded to MS Black Tibe 32 mm dia of 14 gauge with MS Flat cover 20 x3 mm , MS Hold Fast 7 No. made out of MS Flat 32x5mm including cutiing. Welding . Painting two coat of red oxide paint complete in all respect. Toatl Length 7.75=4 No's panel ( 1.80 mtr. wide) and within all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. | |||||
| 7Steel work welded in built-up section, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of red lead paint in beams joists channels, angle cleats as in main and cross beam, hip and jack rafters, purlins connected to common rafters, steel gate and like within all leads and lifts as per the direction of Engineer-in- Charge. | |||||
| 8Painting two coats (excluding priming coat) over new steel and other metal surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with enamel paint other than white.within all leads and lifts as per direction of Engineer-In-charge. | |||||
| 9Providing and fixing of Glove Ball valve superior quality confirming to IS :1879 ISI complete in all respect within all lead lifts as per the direction of Engineer -in- Charge. | |||||
| 1020 mm dia | |||||
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.70 MB
FORM68.pdf
Tender Documents • 2.11 MB
BOQ_195532.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .