PROVN OF TOILET BLCOK WITH WCs, BATHROOM AND URINAL WHBs AT OTM AREA , PROVN OF INTERLOCKING TILES NEAR BLDG NO P 01, PROVN OF SOAKAGE WELL UNDER GE (SOUTH) AKHNOOR.

Amount

Total amount of Schedule 'A' Part- I (Building Work) Note:This Schedule is not pre-priced by MES and the Pre-priced rate indicated as Rs 0.00 under col 5 signifies this fact only.

Constn of Bathroom and Toilet Block alongwith allied infrastructure, Complete all as specified and as shown on Drawings. (Building Work)

The Schedule'A'- Part II to VI are pre-priced by MES.

Total Amount of Sch'A'-Part-II (INTERNAL WATER SUPPLY WORKS )

Total Amount of Sch'A'-Part-III (INTERNAL ELECTRIFICATION WORK)

Total Amount of Sch'A'-Part-IV (ROAD / PATH / CHEQUERED TILES WORK )

Total Amount of Sch'A'-Part-V (EXTERNAL WATER SUPPLY WORK)

Total Amount of Sch'A'-Part-VI (EXTERNAL ELECTRIFICATION WORK)

Sch 'A' Part-VII (MISC ITEMS) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "`. 0.00" under Col.5 signifies this fact only.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed by Engineer-In-Charge.

Machine pressed precast conctete interlocking paver block glossy finished any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade, laid over and including 30mm thick well rammed sand cushion laid over and including sub base of 50mm thick of plain cement concrete M-7.50 (1:4:8), type D-2 (using 40mm graded crushed stone aggregate), with grey cement and no pigment, complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete M-15(1:2:4), type B-1, (using 20mm graded crushed stone aggregate), nominal mix, as in kerbs, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and as directed by Engineer-In-Charge.

Excavation in trenches n exc 1.5 metre wide & n. exc 1.5 metre in depth for foundation etc or for shafts, wells, cesspits manholes, pier holes etc n. exc 10 Sqm on plan n. exc 1.5 metre in depth and getting out in any type of soil, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25Cm, complete all as specified and directed by Engineer-In-Charge.

Removing excavated materials/ soils, to a distance not exceeding 50mtrs and depositing where directed at a level not exceeding 1.50mtrs, complete all as specified and directed by Engineer-In-Charge.

Plain cement concrete M-7.50(1:4:8), type D-2 (using 40mm graded crushed stone aggregate), as mass concrete in foundation, complete all as specified and as directed by Engineer-In-Charge.

Extra for forming fair finished drain or channel 30 Cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc., complete all as specified and as directed by Engineer-In-Charge.

Plain cement concrete M-10(1:3:6), type C-2 (using 40mm crushed stone aggregates) as in bed to drain pipes of 200mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; after laying, complete all as specified and as directed by Engineer-In-Charge.

200 mm dia reinforced concrete hume pipe, class NP-3, laid & jointed with collars laid in trenches/ or across roads complete all as specified.

Mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engineer-In-Charge.

S&F Cast Iron manhole cover of size 600mm dia of Heavy-Duty and grade type HD-20 conforming to IS 1726:1991 , complete all as specified and directed by Engineer-In-Charge.

Construction of soakage well of size 3.0 mtrs dia and 3.0 mtrs in depth , below inlet pipe level (Depth from Pipe to Ground Level 45CM), excavation in any type of soil including plain cement concrete M-10(1:3:6), type C-2 (using 40mm graded crushed stone aggregates) in foundation and honeycombed brick masonry in cement mortar 1:4 and reinforced cement concrete cover slab, M-25, (using 20mm graded crushed stone aggregates), complete all as specified and as shown in drawing. Drawing No- CE/TD/1202/03 sheet 1/2 and 2/2 dated 09.10.03 revised 14.10.14 and 11.05.07.

T bulb curve, 12 Watt LED base B22 cool day light, complete all as specified and as directed by Engineer-In-Charge.

LED mirror light, including LED lamp capacity 5/6 Watt, wall mounted, 300mm long incl necessary wire for making connection, complete all as specified and as directed by Engineer-In-Charge. Make: Havells/ Philips/ Osram/ Crompton.

LED tube light fitting, 18 watt, indoor decorative aluminium extruded T5 LED battens, including LED lamp 18 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size , complete all as specified and as directed by Engineer-In-Charge. Make: Havells cat part No- E-Lite LED Pride Plus LHEXBLP5PN1W018/ Crompton cat part LCTL-18-CDL/ Bajaj product code-12410, luminaire type- BCLSB 18 NW.

LED security/ street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP65 protection, including LED lamps of 45 Watt and connecting up with twin core twisted flexible copper conductor cable of suitable size including House service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer , complete all as specified. Make: Make: Havells cat part No- Endura Pearl Neo SL45WLED757SASYTOPC/ Philips ordering code No- 910925866055 (Product Code- 871869634894900) or equivalent in Osram.

Exhaust fan, mettalic, sweep 250/ 230mm, superior rating for energy saving, mettalic blades, copper wounded motor complete with electronic fan regulator including hanging accessories i.e. U-clamp, down rod, canopy and nut bolts, washers, complete all as specified. Make: Havells cat part No- FHVDBMTGRY09 (Ventilair DB Neo)/ Crompton Greaves/ Usha/ Bajaj/ Orient.

Drilling, cutting and tapping CI/ DI/ GI water mains (in position) the existing pipe of 50mm for branch connections including inserting tee of 50X50X25mm size with all fittings complete all as specified and as directed by Engineer-In-Charge.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 4 of capacity as shown of size 1.5TR , complete all as specified and as directed by Engineer-In-Charge. Make: Voltas/ Carrier/ Blue Star/ Daiken/ Hitachi.

Voltage stabilizer for automatic operations, copper wounded, single phase, naturally air cooled, indoor type with copper wound, , working voltage range (input), 90 Volts to 270 Volts, with output voltage stabilizer at 230V current capacity upto 12 Amps, 4.0 KVA capacity, with accuracy of ±2.50%, complete all as specified and as directed by Engineer-In-Charge. Make: AE/ ElectricField/ Andrew Yule / Godrej.

Sub main wiring (concealed conduits to surfaces) for circuits/ submain wiring alongwith earth wire with two run of 6.0 Sqmm of fire resistance, PVC insulated copper conductor, single core cable, multi-stranded, FRLS, ISI marked, 1100 Volts grade and one run of 6.0 Sqmm, FRLS, PVC insulated copper conductor, single core cable, multi stranded, ISI marked, 1100 Volts grade as earth wire connected to earth terminal, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 25mm dia including all accessories concealed by chasing/ cutting grooves in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, complete all as specified and as directed by Engineer-In-Charge.

Sheet metal enclosures with socket plug top and MCB suitable for single pole and neutral including a two pin and earth plug and socket complete with one single pole MCB, single pole, 32 Amps, 240 Volts, complete all as specified and as directed.

Refrigerator, 310 to 320 Ltrs capacity, double door, single phase 240 Volts, 50 Hz, Five star rating in power savings, powder coated painted body for glossy finish, door lock system for restricted accessibility, frost free switch for faster cooling when needed, complete all as specified and as directed by Engineer-In-Charge. Make: LG cat part No- GC-B389SLCZ or Samsung/ Voltas/ Godrej.

Voltage stabilizer for automatic operations, copper wounded, single phase, naturally air cooled, indoor type, working voltage range (input), 170 Volts to 270 Volts, current capacity upto 12 Amps, 3.0 KVA capacity, with accuracy of ±2.50%, complete all as specified and as directed by Engineer-In-Charge.

Point wiring for 3-pin, 15 Amps, switch socket combination on independent board with 2.50 Sqmm, PVC insulated, unsheathed, single core, multi-stranded, copper conductor cable, FRLS, 1100 Volts, using colour coding, drawn in and including non metallic medium grade rigid PVC conduit, fire resistance, ISI marked, 20mm dia including all accessories concealed by chasing/ cutting in the surface of walls/ floors/ ceilings and making good the disturbed surface matching to existing descriptions/ specifications, with and including sunken type pressed steel/ welded mild steel terminal box 1.20mm thick coated with anti corrosive paint with bakelite laminated sheet top cover 3.0mm thick and including FRLS PVC green insulated unsheathed 2.50 Sqmm copper earth continuity wire connected to earth dolly, complete all as specified and as directed by Engineer-In-Charge.

Switch socket combination 2-in-1, 3-pin, 5 and 15 Amps, flush type, complete all as specified and as directed by Engineer-In-Charge.

Supply and fixing Energy efficient inverter security light 45 watt with RTC having the following Technical Specifications including taking down old UNSV security lights complete all as specified and directed by Engineer-in-Charge:- Housing Material: Aluminum PDC, Top maintainable Front Cover: Clear toughened glass Lens: Suitable high efficient secondary lens LED: LM80 certified LED LED Lumen Maintenance: 50,000 hours @ L70 Control Gear: Isolated, Electronic, CC driver RTC enabled Internal Wiring: Insulated Cu wire Hardware: SS & MS Zinc plated and passivated Ingress Protection: IP66 Impact Resistance: IK05 Operating Voltage: 140V~270V Operating Temperature: -10ᵒC~ 50ᵒC Emergency Light Output: Initial Lumen at Battery mode will reduce to 15-20% Emergency time: 1.5-2 hours Max. (Battery Back-up with Li-ion Battery), ncluding House service bracket for mounting light fittings House service bracket any type complete with 1.50mtr long galvanised iron pipe 40mm dia medium grade, bent to required shape including mild steel clamps of flat iron 40x6mm, hook, stay, nut, bolt and washer including painting with two coats of synthetic enamel paint over one coat of red oxide primer, , complete all as specified and as directed by Engineer-In-Charge.

S&F Ceiling fan, mettalic, sweep 1200mm, with BLDC Motor, high speed, inclduing necessary fitting/fixtures such as Hook and clamps etc including connectig wire of suitable size and length from ceiling rose to fan connector, complete all as specified and as directed. Make: Havells / Crompton Greaves/ Usha / Orient Electric energy star

Desert cooler, electric driven copper wounded motor, single phase, 500mm metallic sweep cooler fan, 1400 rpm, 230 Volt, 50 Hz, air delivery capacity 5000 Cum/Hr, three speed regulator (high/medium/low) with metallic blade and mild steel body, duly painted with synthetic anti-corrosive oven cured paint, submersible pump 40 Watt (approx.), 230 Volts, 50 Hz and including wood wool pad of proper thickness and 2.50Sqmm three core copper wire with connecting top plug including steel work using Angle iron of 50x50x6mm and flat members of size as directed and of appropriate height in stand and making necessary arrangements for fixing of stand in wall by making holes and PCC/mortar work for grouting and making good disturbed surfaces and apply same finishes as exsiting, complete all as specified and as directed by Engineer-In-Charge. Make of motor: Khaitan/ Usha Lexus/ Orient/ Crompton. Note : Cost of steel and framed work shall deem to be included in the quoted rates.

Supply and fixing galvanised iron pipe, medium grade of 15 mm bore including all fittings and cutting/making thread to the existing GI pipe including insertion of new tees/sockets of size as directed etc fixed to walls/ceiling/floors by means of clamps and making necessary connection with existing pipe line complete all as specified and directed. Make : Tata / Swastik / Jindal.

Gate valve with new gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 15mm bore pipe line, complete all as specified and as directed by Engineer-In-Charge.

M/s Shivam Construction Co

CHOPRA CONSTRUCTIONS