REPAIR MAINT OF BITUMINOUS ROAD INCLUDING ROAD FURNITURE AND ROAD MAKING UNDER GE M INF SCHOOL MHOW

Amount

Scarifying or picking up gravelled,macadam or bituminous macadam surface in area not exceeding 400 Sqm and depth not exceeding 100 mm deep and removing to a distance not exceeding 50m and all removed from site etc complete all as specified and directed.

M&L for 75mm thick (compacted thickness) water bound macadam (WBM), with Granite, trap or basalt of grading 2 (63 to 40mm size), spread, rolled and consolidated with 8-10 tonne power roller to required gradient and camber complete all as specified and directed.

M&L for preparing surfaces of WBM surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 10 kg / 10 sqm over WBM surfaces and M&L for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed.

Note1 :- Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.

M&L for preparing surfaces of existing black top surface with wire brushes for removing caked mud etc and sweeping with brooms and finally fanning to clean the surfaces with gunny bags to remove all loose dirt etc and M&L for applying evenly a tack coat with bitumenous primer using paving bitumen VG-30 at the rate of 10 kg / 10 sqm over WBM surfaces and M&L for premixed hot mix Asphaltic Semi Dence Concrete using 5.5% binder content (VG-30 Grade paving bitumen) by weight of total mix and with thickness of 30 mm (consolidated Thickness) including rolling with 8 to 10 tonne power road roller to uniform and smooth surface and consolidation to required gradient and camber all as specified and directed. directed.

Note1 : Cement shall be used as filler at mininum 2% by weight of total mix in event of variation in design mix the percentage of filler content shall be on plus side adopted. (b)SDAC shall be as per MORTH specification Note2: - (i) Laying shall be done by means of self-propelled mechanical paver, finishing with electronic sensor and hydraulic controls with suitable speed and capable of laying, spreading, tamping and finishing. (ii) Mix shall be obtained from computerized hot mix plant and spreading shall be done by using mechanical paver only) (iii) The mix shall be designed by job mix formula and approved by GE. (iv) Cost of testing charges, materials and transportation etc for job mix formula and Independent testing during execution of work shall be inclusive in the unit rate quoted and no extra payment shall be made on this account.

M&L for premix bituminous macadam (consolidated thickness not more than 75 mm) with 4% binder content of paving bitumen of grade (VG-30) by weight of total mix laid and rolled with 8-10 tonne power roller to required gradient and camber up to outer edges of roads on existing black top surfaces complete all as specified and directed. NOTE: - (i) Cost of testing charges, materials and transportations etc for job mix formula shall be inclusive in the unit rate and no extra payment shall be admissible on this account. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver only.

Material and labour fo repair to pot holes not exceeding 1 sqm area including sweeping free from dust and mud or water scoring sunken surface in road,path etc cutting around edges at least 30mm in depth & making good by filling in ,screened and graded road metal,watering and well ramming (including supply of road metal) and making good by applying tack coat @ 10 Kg/10 Sqm of VG-30 ,Grade paving bituminous binder,complete all as specified and directed.

Demolition of cement concrete of any description and in any position etc removal from site up to 500M complete all as specified and as directed.

M&L for PCC (1:4:8), type D-2, using 40mm graded stone aggraegate as in foundation ,mass concrete and filling complete all as specified and as directed.

M&L for machine presses precast concrete interlocking paver block any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment including 30mm thick stone dust cushioning complete all as specified and direction.

M&L 80 mm thick Machine Pressed Precast concrete interlocking Paver block glossy look any shape and size as approved by GE conforming to IS 15656 2006, M-40 grade with grey cement and pigment dry & joints filled over and including 30mm thick stone dust cushioning complete all as specified and directed.

M&L two coat synthetic enamel paint over a coat of primer including preparation on newly brick or contrecte surfaces of any description over 10cm width or girth ,not otherwise described complete all as specified and directed

M&L one coat synthetic enamel paint over a coat of primer including preparation on old brick or contrecte surfaces of any description over 10cm width or girth ,not otherwise described complete all as specified and directed

Surface excavation not Exc. 15cm deep and averaging 10cm deep and removing surplus soil to a distance n exc 50M complete all as specified and directed.

M & L for Hard core broken to gauge n. Exc. 63 mm as in filling in foundation, sub base etc complete all as specified and directed.

M & L for laying for moorum / Red bajri filling in road side berms, laid in layers n exc 15 cm thick, spread, levelled and rammed including consolidated to required gradient and camber etc complete all as specified and directed.

M&L for making lines, dashes, arrows, letters etc not exceeding 15 cm wide on bituminous surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST & BIS specification, not less than 2.00 mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufacturer's instructon inccluding preparation of surface i.e. cleaning of surface by removing all dust, dirt, oil grease etc complete all as specified and as directed.

Supply and fixing in repair Delineators Supplying and installation of delineators 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectengular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming tolRC-79 and the drawings complete all as specified & directed. NOTE : 1. Excavation, removal of surplus soil of pcc pit is 200mm x 200mm x 200mm filled with pcc 1:2:4 type B-1. rate quoted shall be included above. (Make - Dark Eye or equivalent of 3M/Alcolite/solar/SUNEYES).

S&F stainless steel (Grade 304) railing, posts, shed, chairs, sign board frame, and making frame structure etc. As design approved for fixing sign board with top mounted round baluster made of requied dia made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the ralling with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size on the top of floor or the side of waist slab with suitable arrangement completed all as specified and directed.

S&F direction sign board of any size with 4mm thick aluminum composite panel comprising both side high intensity prismatic grade retro reflective sheeting of 3M as base and with cut out massage (legends borders letters / numerals / logo etc ) ht. Of letter up to 150 mm & letter up to 40 nos./sqm as directed with high intensity prismatic grade retro reflective sheeting both side of boards with epoxy powder coating, including fixed over framed work of stainless steel completed all as specified and directed

S&F in repair flexible spring parking post which are made of specialy PU material with 3 white reflective tapes, it can quickly restore to its original state without damaging the vehicle, tensile strength and UV stablizers enables it to withstand the harsh weather conditions including fixing with epoxy adhesives and metallic bolts/MS stud/Anchor colts are used for installation on road. Ht. not less than 730 mm, Dia not less than 75 33 et. not less than 1.0kg; to be installed as per directed. Make :- Model- Dark Eye-DA 963/ Ladwa/KTI/Pioneer-PS932 or equivalent.

S&L in repair plastic speed bump which are highly resistant to severe impacts and harsh weather condition. Its interlocking sub units make it bind perfectly into a one firm bump the per-colored materials 9Black/Yellow) and UV stabilizers keep themperperually colorful, Studded with reflectors on either side, hey are clearly visible to the motorists during night. It is made of PE plastic material. Its fixing with metallic bolts/MS stud/Anchor fashner and suitable adheshive are used for installation on road. Available in Yellow and Black colours. Dimensions : L=730mm, width 245mm & Height=70mm, to be installed as per the directions of Engineer-in-Charge. (Make :- Model- Dark Eye- DA 1006/ or equivalent of SUNEYES/ 3M/Alcolite/solar).

S&F in repair Cat Eye as (Road Stud) two way reflective type of aluminium alloy body of size 110mm x 120mmx 24 mm and weight of 435 gms in Red, Amber or white in colour fixed with and including all necessary items as per manufactures instructions complete all as specified and directed. (Make - Dark Eye Model No DA 972.0 or equivalent of 3M/Sun Eyes)

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechsrgeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructon etc all as specified and directed complete all as specified & directed. Make - SUNEYES/ Dark Eye / 3M/Alcolite/solar

S&F in repair road Solar delineator made of 50 mm round MS pipe 80 to 100 cm high above ground level with high four quality LED flashing light of red or yellow in colors with operating tme of 3-4 consecutive days (with full charge) complete all as specified and directed as per manufactures instructions complete all as specified & directed. . NOTE : 1. Excavation, removal of surplus soil and size of pcc pit is 200mm x 200mm x 200 mm filled with pcc 1 :2:4 type B-1. rate quoted shall be included above. Make - Dark Eye (Model No : DA 112 ) or equivalent of SUNEYES/ 3M/Alcolite/solar

M&L stone dust under floors or in foundations including watering and consolidation spreading and levelling in layers n exc. 25 cm thick. complete all as specified.

M&L providing precast cement concrete in type B1 1:2:4 (20 mm graded agg) in kerbs and eding to road divder and footpath etc incl necessary earthwork with plain fair faces incl chamfered wheathering throating etc and setting in cement mortar 1:4 complete with joints to match all as specified and directed.

M/s ESS KAY Construction

Narayandas Phoolchand Mishra Infrastructures Pvt. Ltd.

Krishna Constructions

M/s Bijender Singh

Vee kay construction