Providing Light Roof structure for 4 Nos. type-I and II qtrs. and painting and finishing outer walls and replacement of existing staircase of type-I qtrs. at DIC residential colony Hamirpur Distt. Hamirpur (HP).

Amount

Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to all heights, in:- (a). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.

Providing and laying cement concrete 1:2:4 (one cement :Two sand :four graded crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work in reinforcement for reinforced concrete work in Supended floor roofs, landing and shelves and thier support balconies, beams, girders, bressumers and contilever upto floor two level. including carriage of materials upto all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat with reguler modified polyster (RNP) organic coated of 20 microns over 5 micron primer coating to back coat of polyster of 5 microns over 5 micron primer coating i/c fixing with prepainted limpet & rubber washers complete with all accessories as required as per the direction of Engineer incharge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins, MS angle, Tee, channel, hollow section in building including carriage of material in all leads and lifts.

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat with reguler modified polyster (RNP) organic coated of 20 microns over 5 micron primer coating to back coat of polyster of 5 microns over 5 micron primer coating i/c fixing with prepainted iron J or L hooks, Bolts, and Nuts 6mm dia & prepainted G.I limpet and bitumen washers complete with all accessories as required as per the direction of Engineer incharge.

Providing and fixing of M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of the Engineer-in-charge. (base members of steel work shall be measured & paid separetly) including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge..

Painting two coats (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brusing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within all lead and lifts.

15mm cement plaster in singale coat on the Fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth and cement primer complete.

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with enamal paint other than white including carriage of materials upto all leads and lifts.

Demolition above G.L. upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from RCC / RB works RCC work.

Providing form work with steel plates (3.15mm) three point fifteen milimetre thick welded with angle iron in frame (30x30x5mm) ( Thirty x thirty x five milimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4mtr. - (a). Beams, cantilevers, girders and lintels. i. Sides and soffits of beams, beam haunching, cantilevers, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor.

(b) Flat surfaces such as soffits of suspended floors, roofs, landing and the like (i) floors etc. upto 200mm (two hundred milimetre) in thickness.

© Stair cases with slopping or stepped soffits excluding landing

Providing and laying cement concrete 1:1.5:3 (One cement : one point five sand :Three graded crushed stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (a) Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers in all floor levels.

(b). Stair cases (except spiral stair cases) excluding landing but including preparing to the surface and finishing of nosing in all floor levels.

Providing and laying matt finished vitrified tiles of size 300 x 300 x 9.8mm having with water absorption less than 0.5% and conforming to IS : 15622 of approved make in all colours and shades in for outdoor floors laid on 20mm thick base of cement mortar 1:4 (1cement: 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-charge i/c carriage of materials in all leads and lifts.

Providing mild steel/tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all floor levels (a). Tor steel. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1 Cement : 3 Sand: 6graded stone aggregated 20mm nominal size) under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials upto all leads and lifts.

AJAY KUMAR GOVT. CONTRATOR

Ankita Dubey

Onkar Chand

Amar Singh

nitin thakur

Sandeep Kumar