Construction of waiting shed at Murukkankudi PHC in Sirumathur Panchayat

Earthwork excavation and depositing on bank with initial lead and list in all classes of soils except hard rock reg. blasting etc., complete as per SS 20B for foundation.

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to work site etc., complete as per standard specification.

Supply and fixing in position of 80 x 40 x 4mm hollow section vertical support of size 5.00Rm etc., complete The hollow section vertical suport fitted to MS angle neatly welded, and necessary joint welded etc., including cost and cutting, drilling and fixing in position lifting over rafter correct alignment and one coat of red oxid primer etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two M.Sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Roofing with roof ridge sheet standard accessories Colour coated A1 Zn alloy coated steel (550 Mps) 0.50 mm TCT Conveyance loading, unloading best quality using J or U clamps with bitumen washers etc., complete as per standard specfication., etc., complete.

Earth work excavation in all classes of soil as per SS 20 B for narrow foundation etc. complete.

Pcc 1:4:8 mix using 40mm HBG metal including cost and conveyance of all materials and all labour charges etc. complete.

Supply and Erection of steel centering for sides and soffits including cost and conveyance of all materials to site and all labour charges etc., complete

Pcc 1:3:6 mix using 20mm HBG metal including cost and conveyance of all materials and all labour charges etc. complete.

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Providing and Laying Paver Block of 60mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete.

Provision for Name board charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}