Restoration of Lab furniture, fume hood and exhaust system including scrubbers and blowers at Chemistry block, IISER, Pune.

Amount

Modular Lab Furniture with C farmes : Providing, design ,supply, Installation and commissioning of best quality factory made ready built Knock down type modular steel laboratory furniture with working height 750 mm to 900mm high as per architectural drawings, all surfaces zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM/ IS Codes, complete as per technical specifications given in the tender document. Rate shall be inclusive of cost of all materials and operations described in the item, drilling holes, necessary welding, required nuts and bolts for joining with the supporting members, rivets, pins including all part items complete as per approved shop drawings and directions of Engineer in charge. Laboratory furniture in general shall consists of under structure "C " frame and under bench suspended with sliding arrangement, sink units, Laboratory bench designed for carrying a loading of 300 Kg/sqm, regent shelves, wall rails, storage cabinets etc. consisting of the following: ( This is common referance for item no 1.01 to 1.23 ) (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

PART A- SUPPLY OF LAB FURNITURE : C Frame Structure : Providing, supply, installation, testing and commissioning of "C" frame and supporting structure or upright frame members for complete knock down type lab furniture comprising of 70mm x 50mm x 2 mm thick or required approved size hollow tubes manufacturered from prime quality CRCA steel 2 mm thick or standard hot finished welded type hollow tubes 2mm thick sections, screwed/ riveted/welded including all cross link members, zinc phosphated/degreased and epoxy powder coated to 60 to 80 microns thickness to pass the required ASTM standards complete as per technical specifications given in the tender document. Each C- frame should be provided with height adjusting plastic/cast feet approx. 30mm above the floor for easy cleaning, adjustable to a tolerance of -5/+5mm to compensate for uneven flooring. Work Top support of C frame assembly shall be of working height from 750mm to 900mm as per site requirements/architectural drawings. C frame should be provided with a suitable unistuds and angle frame to facilitate holding and sliding horizontally the under bench suspended cabinets. Rate shall be inclusive of cost of all materials and operations described, drilling holes, welding, nuts and bolts for joining the supporting members, rivets, pins, all taxes etc. complete as per approved drawings and directions of Engineer in charge. Finished "C" frames/upright frames of lab benches, fixed at site shall be measured in metres and multiplied by actual per m weight of finished member for calculating the net weight for payment. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

In general C frame height shall be 725 mm to 875 mm and 550 mm to 725 mm depth. Cross members length shall be 900 mm to 1800 mm as per required table size. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Vertical/uprights supports for adjustable regent shelves, wall rails or supports for adjustable tables/shelves, supporting frame manufacturered from prime quality CRCA steel 2 mm thick with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour, with height adjustment arrangement for every 25 mm height floor mounted or connected with C frames with nuts and bolts or wall mounted with dash through fasteners of required size complete as per direction of Engineer in charge. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Back/End/Side/ Modesty Panels/panel for service ducts/shutters panels for service ducts: Providing back/end/side panels, made of 1.0mm thick CRCA steel, all round edges folded and bent as per drawings, fixed/open able with snap fitting locking arrangements as per approved design, epoxy powder coated 60 microns thickness. All the electrical fittings, wires coming from mains to switches on service panels should be completely enclosed and all entry points of electrical/data/voice services wires/cables should pass through gland protected openings to avoid any accidental situations. All the accessories should have a very high temperature withstanding capacity and electrical insulation properties. Rate is inclusive of cost of all materials, wastages, edge moulded part of sheet, all fittings required for fixing and operations described below and in general specifications. Finished panel outer length and breadth of panel (out to out without considering the folded edge moulded sheet) shall be measured for working out the area in square meters for payment.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

18mm granite work top :Providing and supply of Table top 18mm thick mirror polished jet black granite with all-round overhang of 30mm from the under structure for table tops, all exposed sides shall be with full round bull nosing, for sink table tops surface V grooves for drainage of surface water along with outer edge 25 mm wide granite edge border properly moulded fixed with Araldite etc over the granite top so as to avoid any spill over of water from the surface of the granite in sink units tops or wherever required, maximum length of 2.4m with joints to suit the bench length, fixed above steel sub structure with 6mm thick neoprene levelling strips. Drip groove shall be provided 2-3mm wide and depth to avoid spillage. Rate is inclusive of cost of all materials and operations described in the item and in general specifications. Finished work granite top (out to out) shall be measured for working out the area in sqm for payment. Rate shall be inclusive of cost of all the materials, making cut-outs, opening in the platform, rounding the edges, V grooves and all operations. Samples of the jet black granite to be got approved from the Engineer in charge before taking up the work. Table top surface area of granite fixed shall be measured for payment.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Under Bench Suspended Units : Providing and supply of under bench suspended base steel cabinets. All cabinet bodies shall be flush front construction with intersection of vertical and horizontal case members, such as end panels, top rails, bottoms and vertical posts in same plane without overlap. Exterior corners shall be spot welded with heavy back up reinforcement at exterior corners. All face joints shall be welded and ground smooth to provide a continuous flat plane. The rate is inclusive of the cost of all materials, labour, Aluminium handle as per specifications. Finished work shall be measured in numbers. Suspended cabinets should have a horizontal sliding arrangement with heavy duty nylon rollers. a)Steel used in construction of cases shall be 1.2mm thk with chemical resistance epoxy powder coating 60 micron thickness matt finish of approved colour except as follows: b)Case and drawer suspension channels, 2mm thk. c)Top and intermediate front horizontal rails, table aprons, hinge reinforcements, and reinforcement gussets, 1.6mm thk. d) Drawer assemblies, door assemblies, bottom, bottom back rail, toe space rail, and adjustable shelves, 1mm thk e) Cabinets of 600mm length shall be provided with one shutter, cabinets of 900mm, 1200mm and 1500mm length shall be provided with 2 shutters. Rate is inclusive of cost of all materials and operations described in item and technical specifications except cost of "C" frame and upright frames which shall be paid for separately. Mode of measurement shall be in numbers as described below

SUSPENDED BASE UNIT 480(H)mmx560(D)mmx900mm(L) divided into 2 front door shutters with lock approved make(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

SUSPENDED BASE UNIT 480(H)mm x 450(D)mm x 600mm(L) with 1 front door shutter with lock approved make(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Overhead framed glass sliding door cabinets : Providing and installing wall storage units made of CRCA steel with chemical resistance epoxy powder coating (60 to 80 micron thickness matt finish) of approved colour and should be 1.2mm thick, double wall construction for side walls with sound dampening technology or side and back wrap around body with corner posts with holes to support shelf supports, shelves shall be provided, constructed from 1.0mm thick CRCA steel epoxy powder coated with all around 27mm strengthening edge, load capacity of 90 kg/ shelf , height should be adjustable to optimise the storage space in side the cabinet. Framed glass sliding door leaf shall be constructed from 1.2mm thick CRCA/ galvanized steel panels, bent to 20mm thickness all around, dampened with contact cushions with 6mm thick float glass with polished edges fixed to shutter frame with pvc gasket. A guide runner shall be provided at the bottom with plastic coated ball bearings or the shutter should be top hung, supported on a ball bearing nylon roller running in a track attached to the top of the cabinet with a guide rail at the bottom. All cabinets should have load carrying capacity of 90 kg per cabinet. All cabinets should have a magnetic label to show details about it’s content. All storage cabinets should be provided with interchangeable cylinder locks. Rate is inclusive of cost of all materials and operations described above and in general specifications. Mode of measurement shall be in numbers as described below.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Size: 900w X400d X 950h with 2 adjustable shelves(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Tall Reagent Storage Case : Providing, supply, installation, testing and commissioning of emergency shower systems with twin cup eye showers, designed and engineered to secure easy operation. This allows for “one-action” activation of the shower system ensuring immediate and continued flushing without any need for further action. This easy operation also allows the injured person to use both hands to keep his eyes open for effective flushing, to undress under the shower or just to help exposing the affected area for better and more expedient treatment. On the eye shower the nozzles are protected by rubber cups to keep the injured person from hurting himself unintentionally. The nozzles are also protected against dust and dirt by the caps which are removed automatically by the initial jet of water. All eye showers & safety showers are delivered with water regulating devices ensuring 11.5 lit/min for eye wash and 75 lit/min for shower, constant adequate water flow regardless of high water pressure and to be fitted with backflow preventer. Make :- Broen / Water saver. The rate is inclusive of the cost of all the materials and labour involved as per drawing and detailed specifications. Mode of measurement shall be in numbers.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Size- 600w x 400d x 2100h with 5 shelves

Sink and Accessories :Providing, supply, installation, testing and commissioning of black colour, acid and corrosion resistant PP sink with integral 50mm pipe threaded drain outlet as a one piece unit. Sink shall be injection moulded from pure polyolefins/ co-polymer material with inside corners coved, undercounter mounted. Size- 550w x 400d x 230h. Sink shall be provided with the following accessories in PP- 3 way wall/ deck mounted water tap with swivelling gooseneck spout ( as per detailed drawing and specifications), anti siphon bottle trap, reducing coupler as per the outlet dia, PP pipe lengths as required to connect to drain pipe at floor. Work includes making connections in CPVC, checking connections at pressure of 4kg for 24 hours and making water tight joints. Water inlet shall be minimum 25mm dia and drain shall be minimum 50mm dia. Price to include providing and supply of Pegboard ( drying rack) of size 300 x 300, made from I mm thick SS 304 sheet with 33 nos. projected polypropylene pins, adjustable with minimum spacing of 10mm between pegs, suitable to hold different sizes of glassware. A drip channel with drain tube shall be provided at the bottom for draining out water. Pegboards shall be fixed on wall or furniture at accessible height. Mode of measurement for sink with all accessories shall be in numbers.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Safety shower and Twin cup Eye wash: Providing, supply, installation, testing and commissioning of emergency shower systems with twin cup eye showers, designed and engineered to secure easy operation. This allows for “one-action” activation of the shower system ensuring immediate and continued flushing without any need for further action. This easy operation also allows the injured person to use both hands to keep his eyes open for effective flushing, to undress under the shower or just to help exposing the affected area for better and more expedient treatment. On the eye shower the nozzles are protected by rubber cups to keep the injured person from hurting himself unintentionally. The nozzles are also protected against dust and dirt by the caps which are removed automatically by the initial jet of water. All eye showers & safety showers are delivered with water regulating devices ensuring 11.5 lit/min for eye wash and 75 lit/min for shower, constant adequate water flow regardless of high water pressure and to be fitted with backflow preventer. Make :- Broen / Water saver. The rate is inclusive of the cost of all the materials and labour involved as per drawing and detailed specifications. Mode of measurement shall be in numbers.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Twin Cup Eye Wash: Providing, supply, installation, testing and commissioning of eye shower with two angled heads, hand held, with polyarylamide handles with integrated activation mechanism that continuously flush water @ 14 litres/minute from high performance spray heads, designed and engineered for easy operation. Rate is inclusive of cost of all materials and operations described above and conforming to drawing and general specifications. Mode of measurement shall be in numbers as described below. Make :- Broen / Water saver.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Providing, supply, installation, testing and commissioning of Acrylic Anti Splash Guard @ Sink Area: Providing and supply of Acrylic Anti Splash Guard @ Sink Area made from ACRYLIC . Rate is inclusive of cost of all materials and operations described above and in general specifications. Mode of measurement shall be in numbers.

ACRYLIC PARTITION OF 10mm THIC 400mm High x 1500mm Length

Spot Extractor: Providing, supply, installation, testing and commissioning of spot extractors made of Poly Propylene with articulating joints having large frictional diameter and supported with ball bearings. All metal parts that come in contact with airstreams shall be made from acid resistant stainless steel ( SS 316). Extraction arms shall be Φ75mm with 360° rotation, which shall be mounted with a m.s. ceiling bracket, chemical resistance epoxy powder coated. Arms are provided with dampers, tight down to under pressure of 3500pa & air temperature of -10° to 70°C, as per drawing and detailed specification. Mode of measurement shall be in numbers.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Service Fixtures : Providing, supply, installation, testing and commissioning of Service Fixtures for All Bench Mounted & Wall / Panel Mounted Needle Valves on Island Tables (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

WALL FITTING PRESSURE & FLOW REGULATOR FIXTURE, HIGH PURITY GASES (2-125 PSIG) WITH 1 VALVE FOR CARBON-DI-OXIDE

BENCH FITTING PRESSURE & FLOW REGULATOR FIXTURE, HIGH PURITY GASES (2-125 PSIG) WITH 1 VALVE FOR CARBON-DI-OXIDE

Providing, supply, installation, testing and commissioning of Service Dropper and Enclosure(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

SERVICE CHASE OF SIZE: 3000mm(H) X 40mm(D) X 179mm(L)

PART B- SUPPLY OF FUME HOOD ACCESSORIES :

Shifting, lifting, positioning, servicing, testing and commissioning of the existing fumehood of size 1800 mm to 2100mm fume hoods from IISER Pune stores to 2nd floor Chemistry block of main building (lead within the campus). Quoted rate shal be including checking of fume hood damper, repairs to sash mechanism, repairs to chemicalcabinate ducting including cost of piping, checking and repairs of consealed GDS, electrical, lighting, valves, cup sinks, connecting water and drain ine to the nearest supply point. The rate shall be quoted per fume hood and shall include the cost of all sundry, labour and taxes as per terms and conditions of bid document. Unserviceable item will be paid under respective head. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

FUMEHOOD CONTROL VALVE:Providing, supply, installation, testing and commissioning of gas and utility control valves, located in the end panels, controlled by extension rods and colour coated plastic handles. Mode of measurement shall be in numbers as described below.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

FH Front Control Valve for Compressed Air

FH Front Control Valve for Nitrogen

FH Front Control Valve for Vacuum

FH Front Control Valve for Raw water

FUMEHOOD INTERNAL PIPING : Providing, supply, installation, testing and commissioning of internal all Utility services piping in fume hoods, consisting SS 304 pipes of required dia and length, all pipes extended up to 150mm above the Fume hood top including making connections with control valves etc complete internal piping work. Fume hood sizes- 1200mm length- 25 Nos, 1800mm length- 81 Nos & 2100 mm length - 5 Nos. Control valve shall be paid separately. Rate is inclusive of cost of all materials, labour and operations. Mode of measurement shall be per each fume hood.

FUMEHOOD INTERNAL ELECTRICAL SYSTEM:Providing, supply, installation, testing and commissioning of fume hood internal electrical supply system, consisting of - 6/16A sockets 3+3 nos, with 16A individual control switch; DB on Top or at suitable location of the fume hood with MCB's for each circuit; FRLS wiring with 4 sqmm wires for power sockets; with Two rapid start, approved fluorescent light fixtures with Electronic ballast installed on roof, 1200mm tube for 1800hoods, 2x900mm for 2400 hoods light switches on Fume hood Fasica, 32 amp 4 pole MCB for main incomer, wiring should be done by using proper raceway/conduit. Socket should be provided with proper earthing with 4 sqmm FRLS wire. Rate is inclusive of cost of all materials, mode of measurement shall be each fume hood. ( Note the control box of fume hood should be placed in the front panel of fume hood for easy maintenance. Proto type sample to be got approved from the Engineer in charge before mass production.)(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

FUMEHOOD CEILING ENCLOSURES:Providing, supply, installation, testing and commissioning of vertical side panels, made of 1.2mm thick CRCA sheet, epoxy powder coated minimum 60 microns thickness -Ceiling Enclosures to fill the space between the top of the hood and the ceiling to get a finished appearance. False ceiling height to be considered up to 3 Meter Height from FFL. The Ceiling Panel to be provided with an Access Panel in the front for easy access to the light fixture, Electrical Junction Box, VAV Dampers etc. Rate to include cost of all materials and operations. Mode of measurement shall be perimeter outer boxing panel and height of panel shall be measured for working out the area in Sqm for payment. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

FUMEHOOD CEILING ENCLOSURES :CUP SINK: Providing, supply, installation, testing and commissioning of PP cup Sink 75mmX150mmX100mm including all accessories with PP bottle trap.(Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

FUMEHOOD CONTROL VALVE: Providing, supply, installation, testing and commissioning of VAV Digital Face Velocity Monitor + actuator power supply/Interface -giving controlled outputs for Damper Actuator control. Includes 2.8 Nm damper actuator with volumetric output and Bacnet/Modbus coms, fixed to front fascia of fume hoods and integrated with the fume hood controls. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

PART C : - CENTRIFUGAL BLOWER & ACCESSORIES Design, supply, installation, testing and commissioning of SISW DIRECT Drive PP Exhaust fans for Fume Hood Exhaust with the following capacity. Including suitably rated Drive Motor suitable to operate with VFD, TEFC Foot mounted, 3phase, 50Hz, 415Volts, IP-55 Protection Class F & Class B Temperature rise. For outdoor application with anti vibration cushy foot mounting, suitable clamp adapter, MS stand with painting and fasteners like bolts, nuts and washers, base frame, motor guard & accessories. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

GF-01 : 3725 CMH ( 2200 CFM ) : 60-80 mm wg SP

GF-01 : 4750 CMH ( 2800 CFM ) : 60-80 mm wg SP

GF-01 : 5090 CMH ( 3000 CFM ) : 60-80 mm wg SP

GF-01 : 9915 CMH ( 5850 CFM ) : 125-150 mm wg SP

GF-01 : 11500 CMH ( 6775 CFM ) : 125-150 mm wg SP

GF-01 : 11865 CMH ( 7000 CFM ) : 125-150 mm wg SP

Design, supply, installation, testing and commissioning of SISW DIRECT Drive PP Exhaust fans for Ventilated Cabinets Exhaust with the following capacity, Including suitably rated Drive Motor, TEFC Foot mounted, 3phase, 50Hz, 415Volts, IP-55 Protection Class F & Class B Temperature rise. For outdoor application with anti vibration cushy foot mounting, suitable clamp adapter, MS stand with painting and fasteners like bolts, nuts and washers, base frame, motor guard & accessories. ( No VFD to be considered) (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

CB-01 : 765 CMH( 450 CFM ) : 60-80 mm wg SP

PP-FRP DUCTING & ACCESSORIES : Design, supply, installation, testing and commissioning of PP-FRP ducting with glass lined ( GL) finish, FRP lining shall be of fire resistant Bisphenol resin. Duct pricing is inclusive of all necessary flanges, bends, entry branches, tapers, inspection door, gaskets for flanges, bolt & nuts, washers, support angle, hanger threaded rods with anchor bolts for fixing. Rate is inclusive of enamel painting for exposed surfaces. Mode of measurement shall be in sqm, measured as circumference x running length, extra will not be paid for accessories such as flanges, entry doors, inspection doors, gaskets etc. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Ducting up to 500mm Dia - wall thickness shall be 3 mm for PP and 3mm for FRP.

Ducting above 500mm Dia - wall thickness shall be 4 mm for PP and 4mm for FRP.

Supply & fixing of PP/FRP 315mm dia. single leaf damper, manually operated for Fume hoods

Supply of PP/FRP 600mm dia. single leaf damper, with both side flanges manually operated for Bypass

Supply & fixing of 325mm Dia flexible hose with 400mm Dia. Clips for Fume hood (Considered 0.5 mt as 1 No)

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes, the damper shall be spring return so as to close the damper in the event of fire. The spring return action shall be inbuilt mechanism and not externally mounted. .... Fire damper ( Material of construction is SS 304) Diameter of damper - 12 inches (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes, the damper shall be spring return so as to close the damper in the event of fire. The spring return action shall be inbuilt mechanism and not externally mounted. .... Fire damper ( Material of construction is SS 304) Diameter of damper - upto 8 inches (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

SCRUBBER SYSTEM & ACCESSORIES : Design, supply, installation, testing and commissioning of Scrubber Type: Vertical with integrated liquid tank, Material: PP/FRP, Airflow: As mentioned Below Temperature: 70deg C (max.), Pressure drop: 70mm wg (approx.), Scrubber Sink consisting of; PP sink of suitable Dia & Height not less than 750mm. complete with makeup water connection with control valve, water level indicator, drain with control valve, over flow pipe, scrubber recirculation pump with Mechanical seal, inlet flange connection with 'Y' Strainer,outlet flanged connections with non return valve (NRV), Ball valve with gaskets & bolt nuts , single stage PP packing rings & single stage PVC mist eliminator pad. One Sets of liquid spray nozzle system , Including Dosing Plug with Valve, Mounting Bolt & Nuts with Anti Vibration Pads,. Scrubber Pump of ~2 HP, 3phase 50Hz, 415Volts. Including all pumps cover, Ladders, Inspection, maintenance door & other accessories. All civil foundations including MS platform and ladder for exhaust blower required as per design, cutting of walls, core cutting whereever required, starter with overload relay of appropriate rating including cabling etc complete . (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

GF-01 : 9915 CMH ( 5850 CFM )

GF-01 : 11500 CMH ( 6775 CFM )

GF-01 : 11865 CMH ( 7000 CFM )

DRY SCRUBBER SYSTEM & ACCESSORIES FOR CHEMISTRY LABS : Design, supply, installation, testing and commissioning of PVC activated carbon filter box complete assembly for filtering of chemical fumes with optimum aeraulic efficiency, compact carbon plates and prefilter unit of for the protection of Activated carbon filters from the dust. Approved make is Plastifer - Italian. PVC activated carbon filter with good absorption capacity, Activated carbon plates approved from class AX and E having great adsorption capacity, lowest static loss, manufactured with acid proof material having pre-filter and easy & rapid installation procedures. complete as per manufacturer specifications suitable for the following range of capacities: Rate is inclusive of cost of MS painted stand, outter casing, filter frame, filters, access doors, inlet & outlet connection with matching flange & entire unit to be supported suitably to match blower centre line. Serrated Rubber pads below supports to be included. Details to be read as Dry Scrubber Tag Number, Air Volume & Name of connected area. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

5090 CMH ( 3000 CFM )

4750 CMH ( 2800 CFM )

3725 CMH ( 2200 CFM )

765 CMH (450 CFM )

Design, supply and fabrication of testing platform work at service shaft consisting of plates, angles, rods, pipes, ISMC etc. The rate shall be inclusive of design, supply, Fabrication to required size and shape, Welding, Cutting, erection, grouting, Anchor Bolts, Base plate, Gusset plates, brazing, GI Fasteners with washers, providing and applying of one coat of steel primer and two or more coats of epoxy paint of approved shade etc. complete as per direction of Engineer in charge. Weight of steel fixed at site shall be measured for payment. (Quoted rate shall be inclusive of all taxes, transportation, leads and lifts and nothing shall be paid extra on this account)

Please Note That Quoted rates are inclusive of all taxes, GST, loading, unloading, lead, lift, labour, transportation etc. Nothing Extra shall be paid be separtely.