Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.5 LAccepted-AOC | L1 | Accepted-AOC Accepted due to L1 | |
| 2 | L2₹21.7 L+₹22,320.50 (1.04%)Rejected-AOC | L2 | Rejected-AOC Higher rate | |
| 3 | L3₹24.8 L+₹3.3 L (15.4%)Rejected-AOC B 101 3RD FLOOR JHILMI COLONY DELHI 110095 | DELHI | EAST DELHI | DELHI | 110095 | L3 | Rejected-AOC Higher rate | |
| 4 | L4₹29.6 L+₹8.1 L (37.8%)Rejected-AOC WZ 199 LAJWANTI GARDEN GALI NO 4 NEW DELHI 110046 | NEW DELHI | DELHI | 110046 | L4 | Rejected-AOC Higher rate |
Tender Value
Refer Docs
EMD Value
₹68,000
Closing Date
9 Nov 2021, 6:00 pmClosed
GE NEW DELHI
GE NEW DELHI
WELCOME MAINTENANCE AND PERIODICAL SERVICES IN CERTAIN BUILDINGS AT RAKSHA BHAWAN AND NDC AND REPAIR MAINT OF SEWER LINE, MANHOLES AND CLEANING OF SEWER APPURTENANCES AND SEWAGE LINE IN SANGLI APPARTMENT, LODHI CAMP, NDC RAKSHA BHAWAN IN THE AOR
2021_MES_480037_1
GE/ND-54/2021-22
Open Tender
Civil Works
Item Rate
270 days
GE NEW DELHI
WELCOME MAINTENANCE AND PERIODICAL SERVICES IN CERTAIN BUILDINGS AT RAKSHA BHAWAN AND NDC AND REPAIR MAINT OF SEWER LINE, MANHOLES AND CLEANING OF SEWER APPURTENANCES AND SEWAGE LINE IN SANGLI APPARTMENT, LODHI CAMP, NDC RAKSHA BHAWAN IN THE AOR
7 documents required · 7 mandatory
₹500
GE NEW DELHI
₹68,000
Yes
18 Dec 2021
6 Oct 2021
13 Nov 2021
6 Oct 2021
9 Nov 2021
20 Oct 2021
Amount
M&L for preparation of old decorated surfaces of walls and applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceilings and applying one coat of white wash complete all as specified and directed.
M&L for applying 1.5 mm thick wall putty as per manufacturer's instructions, surfaces to be finished even and smooth complete all as specified and directed.
M&L for preparation of old decorated distempered surfaces of walls and applying one coat of oil bound distemper including cornices, etc. complete all as specified and directed.
M&L for preparation of old decorated distempered surfaces of ceilings and applying one coat of oil bound distemper including cornices, etc. complete all as specified and directed.
M&L for preparation of old painted surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of plastic emulsion paint on wall/ceiling complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls and applying one coat of exterior emulsion first quality of approved colour including preparation of existing treated surfaces complete all as specified and directed.
M&L for preparation of old painted wood or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted steel or iron based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for one coat of touch wood polishing including cleaning and preparing the surfaces filled with wood filler in disturbed surfaces wherever required on old wood works complete all as specified and directed.
Taking down cement plaster on brick wall surfaces including racking out joints, hacking for key scrubbing down with water, etc. including removal of debris out of defence land complete all as specified and directed.
M&L 15mm thick ready mix plaster on brickwork or concrete surfaces of wall (internal and external surfaces or in patches) in two layers (thickness of each layer not more than 10 mm) finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.
M&L 10mm thick ready mix plaster on brickwork or concrete surfaces of ceiling finished even & smooth. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surface & applying two coats of cement base paint over a coat of white wash on walls complete all as specified and directed.
M&L for preparation of new plastered surface & applying two coats of distemper oil emulsion on walls over a coat of alkali primer over 1.5 mm thick wall care putty complete all as specified and directed.
M&L for preparation of new plastered surface & applying two coats of distemper oil emulsion on ceilings over a coat of alkali primer complete all as specified and directed.
Polishing and grinding only on old marble surfaces with mirror finishing stone of any description like steps, floor, cill, wall, etc. including cleaning with detergent and water complete all as specified and directed.
M&L for cleaning existing chequered concrete tile/ paver blocks and providing PU coating of approved colour pattern and finished to glossy/glare finish complete all as specified and directed.
Cleaning, Flushing off chocked and desilting of outdoor sewage lines n. exc 300mm internal diameter of any depth upto three meter. The cleaning shall be carried out with mechanized operation by means of diesel/electric operated vehicle mounted hydraulic operated high pressure suction cum jetting machines fitted with pump of requisite capacity and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precautions, equipments and with strict supervision complete all as specified and directed. Note:- (a) The service provider/contractor during the mechanised operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower, etc along with the sewage cleaning truck mounted suction/jetting machine. (b) Manual cleaning operation/scavenging is prohibited. (c) The unit rate quoted by the contractor shall deem to include the cost of providing skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc.
Desludging of existing manholes of depth upto 2 mtr (vol of MH exc 0.20 cum but not exc 2.88 cum) for liquid, solids and slurry material by mechanical means using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skilled driver and operator and supervising Engineer including provision of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc removed to outside the MoD land/premises at any distance all as directed by engr-in-charge including loading, unloading, digging out pit of any size in any type of soil, scouring sludge/silt/spoil/mud, etc. into the pit and spraying bleaching powder over the entire surface complete all as specified and directed. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower, etc. along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour and (skilled/unskilled), tools and plants and requisite quantity of water for the entire operation and transportation arrangements.
Desludging including dewatering of septic tank/soak well in dia/ depth and manholes above 2 mtr in depth for liquid and slurry material and removing the sludge from the tank by mechanical using hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of minimum 5000 ltr and suction tank capacity of 300 ltrs and 260 LPM with minimum 145 bar suction flow of 10200 LPM including skiled driver and operator abd supervising Engineer including provition of water for jetting and removal of sludge/silt/liquid/mud and sand (in foul position) etc outside the MoD land/premises at any distance all as directed by Engr-in-Charge including loading, unloading digging out pit of any size in any type of soil, scouring sludge/silt/spoil/mud tec into the pit and spraying bleaching powder over the entire surface complete. Note:- (a) The service provider/contractor during the mechanized operation shall be equipped with gas monitor, nylon rope ladder, torch light and compressor blower etc along with the sewage cleaning truck mounted suction/jetting machine. (b) The cleaning shall be carried out with mechanised operation by means of jetting machines and the sludge sucked out with super succer machine of required capacity and sent to storage tanks for further disposal to the authorised disposal site. (c) Manual cleaning operation/scavenging is prohibited. (d) The unit rate shall deem to include for all material, labour 9skilled/unskilled) tools and plants and requisite quantity of water for the entire operation and transportation arrangements. (e) The measurement shall be included with depth of water and sludge/silt/mud.
Cleaning of manhole and removing the blockage sludge from manhole manually with the help of bamboos/rods/pipes including rodding and flushing the water and dispose off the sludge outside of MoD land, for any size, description of manhole up to 1.5 m internal depth complete all as specified and directed.
Cleaning of sewer line and removing the blockage manually with the help of bamboos/rods/pipes including rodding and flushing the water and dispose off the sludge outside the MoD land upto 200 mm dia pipes complete all as specified and directed.
Cleaning of Gully trap, Nahani trap, Floor trap, WC, WHB, Urinal and sink by removing the sludge manually or mechanically, cleaned with water, disposed off the sludge out of defence land complete all as specified and directed.
Excavation in trenches in any type of soil n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation for manholes/shafts or sewer lines etc. n. exc. 10 sqm on plan & n. exc. 1.5 m in depth & getting out any type of soil complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floor and pavings not exc. 15 cm in thickness, below or above ground level, complete all as specified and directed.
Demolition and breaking up 100mm dia drain pipes (salt glazed ware, AC or reinforced concrete)set in cement mortar & removing demolished material outside defence land complete all as specified and directed.
M&L for SGSW drain pipe grade 'A' 100mm bore (internal) including laying in trenches and jointing in cement & sand mortar 1:2 & testing complete all as specified and directed.
M&L for PCC (1:3:6) type C-2 (using 40mm graded crushed stone aggragate) as in bed including packing under & haunching against sides of SGSW drain pipe 100mm bore after they are laid & tested complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming soil in layers n. exc. 25 cm thick complete all as specified and directed.
Removing excavated materials/surplus soil outside of defence land up to a total distance of 1.5 km complete all as specified and directed.
Demolition of brickwork or stone/ boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed.
M&L for brickwork with sub class B bricks straight or curved on plan exc. 6 meter mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in benching, copings, channels, slightly chamfered or rounded on edge including necessary use of formwork complete all as specified and directed.
S&F in repair wash down water closet (pedestal pattern) pan and trap incl connection to drain (or outgoing pipe) and to flushing pipe anti syphonage pipe etc complete all as specified and directed.
Demolition of RCC manhole cover slabs and similar suspended work (including reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L for MS framed brackets of angle iron or of flat iron with hold fasts etc incl necessary welding, etc. for manholes and covers confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.
S&F precast RCC 1:2:4 manhole covers slabs any size, thickness with 3 mm thick FI around cover slab, polycrete including reinforcement as per manufacturer's design with frame complete all as specified and directed.
Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming channel (1/2 or 3/4 section) in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, finishing smooth and reforming benching as required for 150/200 mm dia pipes complete all as specified and directed.
S&F in repair Cast Iron trap ''P'' for cast iron pipe of size 100mm complete all as specified and directed.
S&F in repair Cast iron floor trap of size 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4:) complete all as specified and directed.
S&F as in repair salt glazed stoneware gully trap of size 180X150 mm square or rounded mouthed, type "P" complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipe 100&75mm bore, jointed in cement mortar and taking out of trenches if required complete all as specified and directed.
S&F Cast iron soil, waste and vent, sand cast pipes pipes in any length with or without ears, with cement joints, laid in trenches or in floors of size 100 mm bore complete all as specified and directed.
S&F Cast iron soil, waste and vent sand cast pipes in any length with or without ears, with cement joints, laid in trenches or in floors of size 75 mm bore complete all as specified and directed.
S&F Cast iron bends (any radius) with ducks foot or heel rest for 100mm bore of pipe complete all as specified and directed.
S&F Cast iron bends (any radius) with ducks foot or heel rest for 75mm bore of pipe complete all as specified and directed.
S&F in repair stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 75mm bore pipe complete all as specified and directed.
S&F in repairs stack clamps size 50mm x 5mm, flat iron and 16mm dia round iron stays, including bolt and nut and securing ends of stay to wall or roof 100mm bore pipe complete all as specified and directed.
M/S SONU ENTERPRISES
BEHAL TRADERS
M/S MSD & Associate
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .