REPAIR/POLISHING AND PAINTING OF WOODEN CHAIR OF VARIOUS TYPES AND OTHER WOODEN/STEEL FURNITURE AT BSO PANAGARH UNDER GE PANAGARH

Amount

FD-1031/ Sketch 'V' Job No- 3052 Almirah steel large

Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting. All as directed by Engineer-in-Charge and shown on drawing

Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge/GE.

Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing.

Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg.

Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg.

Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Removing the worn out paint from internal/external surface of almirah steel large by scraping. Necessary preparation of surface for painting duly dented/pitted and smoothen the surface by putty and painting the internal and external surface with two coat of synthetic enemalled paint over a coat of primer Metal to bring the surface to a glossy shine as directed by Engr-in-Charge.

FD-1032 / Sketch 'X' Job No- 3053 Almirah Steel Medium (Size 1260x760x420mm)

All as per item No 1.01 mentioned here-in-above but for Almirah steel medium.

All as per item No 1.02 mentioned here-in-above but for Almirah steel medium.

All as per item No 1.03 mentioned here-in-above but for Almirah steel medium.

All as per item No 1.04 mentioned here-in-above but for Almirah steel medium.

All as per item No 1.05 mentioned here-in-before but for Almirah steel medium.

All as per item No 1.06 mentioned here-in-before but for Almirah steel medium.

All as per item No 1.07 mentioned here-in-before but for Almirah steel medium.

FD-229 / Sketch 'PQ' Job No- 3051 Repair/Re-canning of chair Easy Remove of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Front Legs

Front rail of seat frame

Side Rail

Back Rail

Arm Rest

Removing the existing unserviceable canning and supply and weave with 2 mm thick new white plastic cane oval shape Godrej pattern and beading with 4mm thick new white plastic cane as approval by GE and providing new hard rubber shoes on legs below of chair Easy.

Preparation of surface by Remove of existing polishing mark scratches from all exposed wooden surface to make clean and smooth with required grade of sand paper and finish with polish to bring the surface to require glossy finish and as directed by Engr-in-Charge here-in-before but for Chair easy.

FD-277/ Sketch 'Y' Job No- 3209 Repair to Peg Table

Removing the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 30x50x362mm high and fixing the same in its original position as per drg.

Removing old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20mm x 40mm x380mm and fixing the same in its original position as per drg.

Removing the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on peg table in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs. Size of particle board shall be 450mm x 300 mm.

All as per item No 3.07 mentioned here-in-above but for peg table.

FD-1029/ Sketch 'W' Job No- 3050 Locker Steel/ Locker Bed Side

Taking out of broken door shutter from Locker Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

Removing old broken/damaged hasp of locker steel and S&F new hasp & stappples of size 150 mm long chromium plated to the shutters of locker steel.

Removing old broken handle of locker steel and S/F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel.

Removing old broken hanging rod of locker steel and S&F new hanging rod made out of 20mm dia chromium plated pipe 500mm long of locker steel.

All as per item No 1.07 mentioned here-in-above but for Locker Steel.

FD-165(M)/ Sketch 'X' Job No- 3049 Table dining ORs / Table dining (Size 1800x900x750mm)

Removing the unsv top and fixing new 19Mm Thick Particle Board Bonded with phenol formaldehyde/ 19mm MD Fiber board exterior grade BWP type with 1.5 mm thick decorative laminate fixed on one side shall be used (rose wood of formica shade or sungloss shade) or equivalent.

Removing the existing unsv steel long rail from Table Dining ORs and S & F new steel long rail of size : 25mm x 25mm x 1.6mm thick, 1575mm long. All as shown on drg and directed by Engineer-in-Charge.

Removing the existing unsv MS legs from Table Dining ORs and S & F new leg made out of 25mm x 25mm x MS tube 1.6mm well thickness. All as directed by Engineer-in-Charge and as shown on drg.

Removing the existing unsv stiffner bottom and S & F new stiffner bottom made out of 25mm x 25mm, MS tube of 1.6mm well thickness. All as directed by Engineer-in-Charge and shown on drg.

Removing the existing unsv stiffner Top and S & F new stiffner top made out of 25mm x 25mm, MS tube of 1.6mm well thickness. All as directed by Engineer-in-Charge and shown on drg.

Removing the existing unserviceable shoes from Table Dining OR's and and S & F new PVC Shoes suitable for 25x2mm MS tube. All as directed by Engineer-in-Charge and shown on drg.

Painting (Removing the existing worn out paint from Table Dining OR's and applying one coat of synthetic enamell paint black over a coat of primer. All as directed by Engineer-in-Charge and shown on drg.

FD-280 / Sketch 'X' Job No- 3051 Repair/Re-canning of Chair Writing Removing of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drg.

Front Legs

Rear Legs

Front rail of seat frame

Side Rail

Long Stiffener

Back rest batten

Arm rest

Removing the existing canning and supply and weave with 2mm thick new white plastic cane oval shape godrej patern and beading with 4mm thick new white plastic cane as apporeved by GE and providing new hard rubber/PVC shoes at the bottom of the chair.

All as per item No 3.07 mentioned here-in-before but for chair writing.

FD-274/ Sketch 'PP' Job No- 3051 Repair to Table Centre.

Removing the old unserviceable leg and providing the new leg made out of 1st class teak Wood seasoned of size 60x30x356mm high and fixing the same in its original position as per drg.

Removing old broken top rail and providing the new top rail made out of 1st class hardwood teak of size 20x50x900mm and fixing the same in its original position as per drg.

Removing old unserviceable top short rail and providing the new top rail of size 20x50x450mm and shape made out of 1st class HW well seasoned teak and fixing the same in its original position as per drg.

Removing the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing the same on peg table in its original position as per drawing and providing new hard rubber/PVC/Nylon shoes to the bottom of legs. Size of particle board shall be 450mm x 300 mm here-in-before but for Table centre.

All as per item No 3.07 here in before but for Table centre

TP /Sketch 'U' Job No- 3252 Chair Revolving

Removing the old unsv back frame and S & F with Dimensions as shown on drngs. Back shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra conform with PVC lapping all arounds complete all as specified and directed.

Removing the old unsv back frame and S&F Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete all as specified and directed.

Removing the old unsv back frame and S&F Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed

Removing the old unsv back frame and S&F Pedestal assy injection moulded in black 30% glass filled nylon. A 10.5mm dia forged bright sinc plated MS castor pin is of press fitted into each prong for holding the castor. It is 600mm pitch centre dia complete all as specified and directed.

Removing the existing unserviceable/broken Hydraulic from chair Revolving and supply & fixing the new Hydraulic existing size in its original position all as shown on drg and directed by Engr-in-Charge.

All as item No 9.05 mentioned here-in-above above but for tilt locking machanism assy.

FD/MAP/II/05 / Sketch 'Y' Job No- 3049 Repair of Chair Dinning

Removing the existing unserviceable/broken PVC seat from chair dinning and supply & fixing the new PVC seat 4mm existing size in its original position all as shown on drg and directed by Engr-in-Charge.

Removing of existing unserviceable under mentioned members and providing the new one made out of 1st class HW well seasoned (Teak) and fixing the same in its original position as per drawing.

Front Legs

Rear Legs

Front rail of seat frame

Side Rail

Back Rail

Short stiffener

Back rest batten

All as per item No 3.07 mentioned here-in-above but for Chair Dining

FD-1029/ Sketch 'W' Job No- 3208 Locker Steel (Size 3000x800x1200mm)

Taking out of broken door shutter from Locker Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing

Removing old broken damaged hasp of locker steel and S/F new hasp & stappples of size 150 mm long chromium plated to the shutters of locker steel.

Removing old broken handle of locker steel and S/F new handle of size 100 mm long 'D' Type chromium plated to the shutters of locker steel.

Removing old broken hanging rod of locker steel and S/F new hanging rod made out of 20mm dia chromium plated pipe 500mm long of locker steel.

All as per item No 1.07 mentioned here-in-above but for Locker Steel.

FD-97(M)/1023 Sketch 'W2' Job No- 3912 Shoe Rack (Shelter) / Tray steel 3/4 spaces

Removing of old unsv fillowing parts of Rack Shoe Steel & fixing new parts of following:

Replacement of unsv leg angle iron 25x25x750x5mm

Replacement of unsv Shelf 1mm MS Sheet fixing with nut bolt

All as per item No 1.07 mentioned here-in-above but Shoe Rack

FD/E6/MAP/12 / Sketch 'PP' Job No- 3053 Chair Visitor

S&F Back frame with Dimensions as shown on drngs. Back shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam. The back frame shall be designed with contour lumber supports for extra comfort with PVC lapping all arounds complete all as specified and directed.

S&F Seat frame of size 510x470x60. seat shall be of 18/19mm thick hot presed ply wood upholstered with fabric and moulded polyurethane foam complete all as specified and directed.

S&F Hand Rest with Black intergral skin polyurethane reinforced with MS insert. It shall be scratch and weather resistant complete all as specified and directed

Removing the worn out paint by scraping from the steel surface, necessary preparation of surface for painting and welding wherever required, two coat of spray painting with synthetic enamelled paint black over a coat of Metal primer after dent/bent portion.

FD/MAP-II/15® TableBed Side (MAP )

Removing old broken damaged top of TableBed side and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top. here-in-before but for TableBed side

Removing the US handle of table Bed side and providing the new one chromium plated 75 mm ' D' Type as approved/directed by Garrison Engineer and fixing the same in its original position.

Removing old & u/s Hard rubber / PVC Shoe from Table Bed Side and supply and fixing new hard rubber / PVC Shoe to Table bed side at the bottom of legs complete all as directed & shown on drg.

Removing the US ply wood from the back of the table bed side MAP and providing the new one made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg.

Tightening of complete steel frame of Table bed side by the help of scew driver or by welding and making functional.

FD/MAP-II/01 Charpoy Hard Top MAP

Removing the existing unserviceable Ply wood from Charpoy ip sq with ply and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

All as per item No 1.07 here-in-before but for Charpoy Hard Top MAP

FD-FD/E6/MAP/08 (R)/Sketch 'W' Job No- 3051 Bed Hard MAP

Removing the existing unserviceable Ply wood from Hard Bed and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

Removing the existing unserviceable Foot Board from Hard Bed and making the frame to its original position by tightening etc and Supply & fixing with new Pre Laminated Particale Board 18mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

Removing the existing unserviceable Head Board from Hard Bed and making the frame to its original position by tightening etc and Supply & fixing with new Pre Laminated Particale Board 18mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge.

All as per item No 1.07 mentioned here-in-above but for Hard Bed

FD-84/1004 / Sketch 'X' Job No- 3053 Table Writing/ Steel Table Type III (Size 900x610x760mm)

Removing old broken damaged top of Table Writing Steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top.

Removing old u/s internal cupboard/drawer locks from Table Writing Steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality.

Taking out of u/s worn out drawer and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg.

Repair of Drawer and worn out welding drawer in its original position existing size and shape. All as shown on drg.

Removing old broken u/s rubber shoes of Table Writing Steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of Table Writing Steel

All as per item No 1.07 mentioned here-in-before but for Table Writing Steel

FD-284 Table 900x600x760mm without drawer/with drawer (FD-284,FD-283)

Removing the old top and providing the new top made out of 18mm particle board one side laminated exterior grade with 4mm teak wood beading all around and fixing here-in-before but for Table 900x600x760 mm without drawer / with drawer.

Removing old u/s following components of table 900x600x760mm with or without drawer & S/F with new components made out of 1st class well seasoned teakwood free from knots, cracks, sapwood etc all as directed & as shown on drg :-

Legs (size 740x60x30mm)

Long rails (740x25x65mm)

Short rails ( size 440x25x65mm)

Side rails (740x25x130mm)

S& F new drawer

All as per item No 3.07 mentioned here-in-above but for Table 900x600x760mm without drawer/with drawer.

FD-88(m) Table 900x900x760mm wdn

All as per item No 18.01 here-in-before but for Table 900x900x760 mm.

Removing the following broken/damaged components/parts of table 900x900x760mm & S/F new components as under made out of Ist cl well seasoned teakwood all as per drg :-

Legs of size (60x35x760mm long)

Top rails of size (75x25x900mm long)

All as per item No 3.07 mentioned here-in-before but for Table 900x900x760mm .

FD-241 (M) Repair of side board

Removing existing unserviceable legs of side board and Supply and fixing new legs made out of 1st class teak wood well seasoned all as shown on drg.

Removing the unserviceable knobs of side board drawer and supply & fix new knobs as per existing size and all as shown on drg.

Removing the unserviceable back ply from side board and supply & fix new plywood 6mm thick BWR as per existing size all as shown on drg.

Removing the unserviceable shutters from side board and supply & fix new shutters made out of 18mm thick particle board exterior grade one side teak face and loumerical white all as shown on drgs.

Removing of the old unsv existing drawers and supply and fixed new drawers made of 1st class hard seasoned teak wood free from knots duly french polished.

Removing of old unsv existing top of side board and S&F new top made out of prelaminated particle board one side teak face and other side loumerical white exterior grade with french polished teak wood edging all around .Rest all as directed and as shown on drgs.

All as per item No 3.07 here-in-before but for side board.

FD-230 Table dressing gents with mirror

Removing worn out u/s frame of mirror and replace the same with new one made out of well seasoned teak wood of size 19x25x2320mm as per drg.

Removing worn out u/s back ply of mirror and providing with new one ply wood 6mm thick of size 380x760mm and fixing the same in its original position as per drg with clits on back.

Removing the worn out u/s broken mirror and replace the same with new one of size 380x760x5.5mm thick and fixing the same in its original position as per drg.

Removing worn out u/s top of table and providing the new one made out of pre-laminated particle board of size 900x300x 18mm and fixing the same duly beading in its original position as per drg.

Removing worn out u/s back of table and providing the new one made out of 1st class teak wood plank of size 900x135x12mm and fixing the same in its original position as per drg.

Removing u/s worn out side of the table and providing the new one made out of 1st class teak wood plank of size 300x135x12mm and fixing the same in its original position.

Removing u/s worn out bottom of table and providing the new one made out of 1st class teak wood plank of size 900x300x12mm and fixing the same in its original position.

Removing the u/s worn out face of drawer and providing the new one made out of 1st class teak wood plank well seasoned of size 285x125x12mm and fixing the same in its original position.

Removing side of drawer and providing the new one of size 280x115 (Back side) made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.

Removing side of drawer and providing the new one of size 280x130 made out of 12mm thick well seasoned 1st class HW(Teak) and fixing the same in its original position.

Removing u/s ply from the bottom of drawer and providing the new one of 6mm thick BWR plywood of size 290x265 and fixing the same in its original position.

Removing the u/s knobs and providing/fixing the new one chromium plated knob 40mm and as directed by Engr-in-Charge.

All as per item 3.07 here-in-before but for table dressing gents.

Deduct the total amount of credit against Sch 'A' Rs (-) 13,759.85/- (*) This amount is fixed and shall be deducted from the quoted amount of the bidder to arrive at contract sum.

UNIQUE ENTERPRISE

MS kesh and co

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)