SPECIAL REPAIR FOR RENEWAL AGAINST BER ITEMS AND CONVERSION OF NEWAR CHARPOY TO PLY TOP CHARPOY AT MIL STN UNDER AGE (I) UDAIPUR

Amount

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031) Overall size shall be 910x490x1900mm made of MS sheet. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall be provided for leg, body and shelf. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

Almirah small steel with shelves(FD-1032) Overall size shall be 765x440x1170mm made of MS sheet. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall be provided for leg, body and shelf. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

Bed Hard Steel (FD/E6/MAP/08 R) Steel frame of overall size shall be 2050mm long with size 25MMX65 MM (18 Guage) pipe , 900mm wide with size of 25MM X 65MM (18 Guage) and 25MM X 25MM (18 Guage) 04 Nos SQ MS pipe at equal diastace with parallal of short rail. Four legs of 38mm X 38mm mild steel tube of 18 guage wall thickness. Headboard and Footboard will be both 18mm pre laminated board screwed to MS strip arc welding to 18mm X 18mm size frame . Top shall be 12mm BWR phenolbonded commercial ply with edgeing(Unpolished). Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

Rack Adj 6 tier 1905 X 915 X 610 mm(FD-1038) Overall size shall be 610x915x1905mm made of MS sheet.1mm thick MS sheet shall be provided for leg, body and shelf. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

Almirah Mess Utensils(FD-93(M)) Overall size shall be 1065mm long 280mm at top & 495mm at bottom wide and 1670mm high. Wood shall be first class hard wood teak. All exposed surfaces of teak wood and teak veneered surfaces shall be French polished. Rest all as per drg & as specified.

Material and Labour for removing of old unserviceable nylon newar of Charpoy GI pipe and fixing of 12mm thick ISI mark ply wood commercial both faces of single piece on the top of charpoy, complete from long rail to long rail and short rail to short rail, BWR grade by making 12 Nos holes (04 nos each long rail and 02 Nos on each short rail) with nuts and bolts of 6mm dia including bolts lenght upto 50mm with GI washer of 3mm size and provision of 02 Nos flat iron stiffener 40 X 6 mm from long rail to long rail of charpoy duly holed below ply for support including painting with two coats of black paint over a coat of red oxide primer. Frame of charpoy shall be tightened before fixing ply, all as specified.(FD-220)

Material and Labour for removing of unserviceable long rail having both thread broken at end and supply and fixing new long rail GI tubing 32 mm bore medium grade duly threaded at both ends, all as specified and shown on drg make of GI pipe shall be ISI Marked. (FD-220)

Labour for removing of unserviceable short rail having both thread broken. Fixing the shorty rail made out of broken long rail, obtained from Srl item No 7 here-in-before threading the both ends of short rails and fixing in position complete as per drg. (FD-220)

Labour for removing unservceable/damaged legs of charpoy GI pipe and fixing leg made out of short rails obtained from Srl No 8 here-in-above threading and fixing in position complete as per drg. (FD-220)

Material and Labour removing existing old unserviceable 3 way GI albow 32mm bore and supplying and fixing of new elbow (ISI marked), all as specification. (FD-220)

Material and labour for electric welding of long/short rails, legs of GI Charpoy frame of size 32mm by continuous Welding in repairs n. exc 2.5cm and exc 2.5cm but n exc 5cm in length around with the joint where ever required complete all as specified. (FD-220)

Material and labou removing old unserviceable wooden blocks from the lower end of legs and material and labour for welding MS sheet 50mm dia, 4 mm thick to legs of GI pipe charpoy, Complete all as specified. (FD-220)

SNEH CORPORATION (BID ID -3302572)

M/s Makhan Lal (BID ID -3304046)

JAISWAL ENTERPRISES (BID ID -3304113)