Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.6 LAccepted-AOC | L1 | Accepted-AOC Found 1st Lowest | |
| 2 | L2₹16.4 L+₹71,039.29 (4.52%)Rejected-AOC | L2 | Rejected-AOC Found 2nd Higher | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
| Sl No | Description | Qty | Unit | JMC Enterprises L1 | MAA ELECTRICAL ENERGY L2 |
|---|---|---|---|---|---|
| 0.00The work of constructions of New 11 KV Line from 33/11 KV S/S Fatehganj to Vill. Chhataini/Goremau on 8.5/11/13 Mtr. Long PCC/ST Poles with ACSR Dog/Weasel conductor of 11 KV Sarha Feeder Line due to load bifercation of 33/11 KV S/S Kalinjar under BUSINESS PLAN SCHEME 2025-26 under EDD Atarra, including carriage of all required material from ESC Banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material/scraped from site to store centre, if any. The bidder shall be responsible for complete execution of the work under the scope of tender specification. Any work/activity not specifically indicated but is required for systematic execution of job shall be carried out by the contractor without any extra payment. The material supplied by contractor should be the best quality and as per standard including transportation, if any. Details of the work as given below ;- | |||||
| 1.00Supply of following materials :- | |||||
| 1.01 | M.S. Top Channel as per RESSPO manual. | 20 | No. | 100 ₹2,000.1 Lowest | 3,068 ₹61,360 |
| 1.02 | M.S. Dropper Channel as per RESSPO manual. | 20 | No. | 100 ₹2,000.1 Lowest | 2,596 ₹51,920 |
| 1.03 | M.S. T-off Channel as per RESSPO manual. | 2 | No. | 100 ₹200.01 Lowest | 1,510.4 ₹3,020.8 |
| 1.04 | Channel Clamp with N/B as per RESSPO manual. | 88 | No. | 100 ₹8,800.44 Lowest | 377.6 ₹33,228.8 |
| 1.05 | M.S. Guarding Angle with Clamp and N/B as per RESSPO manual. | 8 | No. | 9.99 ₹79.96 Lowest | 3,162.4 ₹25,299.2 |
| 1.06 | M.S. Bracing Angle 65x65x6mm with clamp N/B as per RESSPO manual. | 20 | Set | 9.99 ₹199.89 Lowest | 3,870.4 ₹77,408 |
| 1.07 | 33 KV Cross arm holding clamp with Nut/Bolts and washer as per RESSPO manual. | 40 | No. | 9.99 ₹399.78 Lowest | 483.8 ₹19,352 |
| 1.08 | 11 KV Cross arm holding clamp with Nut/Bolts and washer as per RESSPO manual. | 207 | No. | 50 ₹10,349.3 Lowest | 377.6 ₹78,163.2 |
Tender Value
₹15.8 L
EMD Value
₹16,000
Closing Date
29 Sept 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SE, EDC, BANDA
Chilla Road, Indira Nagar, Banda
The work of erection of new 11 KV Lines under EDD, Atarra (Business Plan 2025-26)
2025_DVVNL_1069446_1
EDCBNDA-20/2025-26
Open Tender
Electrical Works
Item Rate
180 days
Banda
As per annexured
2 documents required · 2 mandatory
₹3,540
DVVNL
₹16,000
SE, EDC, BANDA
13 Jan 2026
28 Aug 2025
29 Sept 2025
28 Aug 2025
29 Sept 2025
28 Aug 2025
25 Sept 2025
The work of constructions of New 11 KV Line from 33/11 KV S/S Fatehganj to Vill. Chhataini/Goremau on 8.5/11/13 Mtr. Long PCC/ST Poles with ACSR Dog/Weasel conductor of 11 KV Sarha Feeder Line due to load bifercation of 33/11 KV S/S Kalinjar under BUSINESS PLAN SCHEME 2025-26 under EDD Atarra, including carriage of all required material from ESC Banda to work site, alongwith its loading, unloading & dragging at the respective ends and also safe carriage of old line material/scraped from site to store centre, if any. The bidder shall be responsible for complete execution of the work under the scope of tender specification. Any work/activity not specifically indicated but is required for systematic execution of job shall be carried out by the contractor without any extra payment. The material supplied by contractor should be the best quality and as per standard including transportation, if any. Details of the work as given below ;-
Supply of following materials :-
M.S. Top Channel as per RESSPO manual.
M.S. Dropper Channel as per RESSPO manual.
M.S. T-off Channel as per RESSPO manual.
Channel Clamp with N/B as per RESSPO manual.
M.S. Guarding Angle with Clamp and N/B as per RESSPO manual.
M.S. Bracing Angle 65x65x6mm with clamp N/B as per RESSPO manual.
33 KV Cross arm holding clamp with Nut/Bolts and washer as per RESSPO manual.
11 KV Cross arm holding clamp with Nut/Bolts and washer as per RESSPO manual.
33 KV F-Clamp with Nut/Bolts and washer as per RESSPO manual.
11 KV F-Clamp with Nut/Bolts and washer as per RESSPO manual.
PG Clamp as per RESSPO manual.
Alluminium Paint as per RESSPO manual.
Red Oxide Paint as per RESSPO manual.
Danger Board with clamp nut-bolts as per RESSPO manual.
Erection/Instalation/Fixing of following :-
Safe cartage of 8.5 Mtr. long PCC poles from store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging.
Safe cartage of 11 Mtr. long ST poles from store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging.
Safe cartage of 13 Mtr. long ST poles from store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends also including the work of dragging.
Safe cartage of line material viz. conductor, cable, G.I. earth wire, cross arm, angle, channel, insulator, clamps and other line material from store centre or from any other place to the respective site of work through the Kachha Pacca road including the work of its loading & unloading at the respective ends, including the work of its dragging.
Erection of Single support on 8.5 Mtr. long PCC poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge.
Grouting of Single support on 8.5 Mtr. long PCC poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each).
Erection of double pole support on 8.5 Mtr. long PCC poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge.
Grouting of double pole support on 8.5 Mtr. long PCC poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each).
Erection of single support on 11 Mtr. long ST poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge.
Grouting of single support on 11 Mtr. long ST poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each).
Erection of Double Pole support on 11 Mtr. long ST poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge.
Grouting of Double Pole support on 11 Mtr. long ST poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each).
Erection of single support on 13 Mtr. long ST poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge.
Grouting of single support on 13 Mtr. long ST poles, including complete H.T./L.T. fittings as per RESSPO manual and as per direction of Engineer incharge. The support shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 (0.285 Cu. Mtr. each).
Erection and grouting of stay set with nozelling & binding as per norms.
Fixing of earthing rod as per RESSPO manual.
Laying, sagging, stringing, binding and jumpering etc. of ACSR Dog Conductor on the newly erected pole as per direction of supervising engineer/RESSPO manual.
Laying, sagging, stringing, binding and jumpering etc. of ACSR Weasel Conductor on the newly erected pole as per direction of supervising engineer/RESSPO manual.
Painting of ST poles as single/double poles structure with Alluminium Paint as per RESSPO manual.
Painting of ST poles as single/double poles structure with Red Oxide Paint as per RESSPO manual.
Fixing of Guarding Angle for guarding of 11 KV Line at road/river crossing.
Fixing of Danger Board with all accessories as per RESSPO manual.
Chopping of Tree Branches coming in the vicinity of the lines during the execution of above work (One Job means one site of work).
Note: Any quantity of item from sl no. 1 to sl no. 2.23 may vary to any limit within the financial value of agreement against this tender.
MAA ELECTRICAL ENERGY (BID ID -5571358)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .