Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC INDEX NO E 108 HQ CWE NO 2 DELHI CANTT J 636 SECTOR 23 SANJAY NAGAR GHAZIABAD UTTAR PRADESH 201002 | GHAZIABAD | UTTAR PRADESH | 201002 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹4.0 L+₹29,555 (7.94%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹4.3 L+₹54,740 (14.7%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder | |
| 4 | L4₹4.5 L+₹75,670 (20.3%)Rejected-AOC TP 117 2ND FLOOR MAURYA ENCLAVE PITAMPURA DELHI 110034 | DELHI | DELHI | DELHI | 110034 | L4 | Rejected-AOC Other than lowest bidder |
Tender Value
₹6.3 L
EMD Value
₹12,600
Closing Date
4 Sept 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE I CG
AGE I CG Noida
MISCELLANEOUS E/M WORK UNDER AGE (I) CG NOIDA
2024_MES_663342_1
AGE I CGN 14 24 25
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
AGE I CG NOIDA
E b i
8 documents required · 8 mandatory
₹500
Yes
AGE I CG
₹12,600
Yes
16 Dec 2024
2 Jul 2024
6 Sept 2024
2 Jul 2024
4 Sept 2024
17 Jul 2024
Amount
Taking down carefully 1" POP-up ROTOR sprinkler 11.96-21.6 m radius rotor with automatic arc return and non stripable drive part and full circle in one model, flow 16.3-120.2 LPM with CV etc of any make and type, opening for examination and for replacement of unserviceable spare parts and refixing the same in position, complete all as specified and directed. Note :- Replacemeent of defective spare part of fitting (to make it function) will be measured & paid separately as supply & fix in repair. However, cost of replacement of unserviceable screws, nuts, bolts and cleaning shll be deemed to be included in quoted rate.
Taking down carefully ABS switch joint 1" POP-up connecting four elbow swing joint assembly of any make and type, opening for examination and for replacement of unserviceable spare parts and refixing the same in position, complete all as specified and directed. Note :- Replacement of defective spare part of fitting (to make it function) will be measured & paid separately as supply & fix in repairs. However, cost of replacement of unserviceable screws, nuts, bolts and cleaning shall be deemed to be included in quoted rate.
S&F in repairs screen filter 3" (50 m3/hr) normal Flow rate 220 GPM. Screen material stainleess steel, Maximum Pressure 85 psi. Filteration surface area 155.0 inch2 , Inlet/Outlet connection 3" NPT Female Theraded, complete all as specified and directed.
S&F in repairs Hydrocyclone Filter 3" (50m3/hr) Normal Flow rate 220 GPM. Screen material construction of clamp stainless steel, Maximum Pressure 85 psi, collection capacity 8 ltr, complete all as specified and directed.
S&F in repairs Disc Filter 3" (50m3/hr) Normal Flow rate 220 GPM. Material of construction glass filled polypropylene, Maximum Pressure 85 psi. Filteration surface area 262 inch2 inlet/outlet connection 3" NPT female theraded complete all as specified and directed.
M&L for detecting water leakage/blockages in underground water pipe lines, turning off/on water and draining the system as required, with necessary excavation at location of leakage/blockage and carrying out repair of GI/CI/DI/HDPE pipe of any size with tightening of loose connection, removing & cleaning blockage, replacement of u/s fittings & repair/replacement of joints, all as specified and directed by Engineer In Charge Note: 1. Excavation & Earthwork, Additional Pipe, Joint and jointing material shall be included in the quoted rate. 2. GI/ CI/ DI/ HDPE fittings such as bends, elbows, tees, reducers, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc of any size shall be included in the quoted rates.
Supply and Fix LED phase indicating lamp R-Y-B colour as required at site complete with base holder suitable for AC, 240 volts and testing including removing of old unserviceable lamps complete all as specified and directed. Make : Minilec / L&T / Siemens/AE
Supply and Fix digital type voltmeter 0-500 volts range, flush type, AC, 50Hz in existing panel boards after disconnecting of cables and testing including removing of unserviceable voltmeter complete all as specified and directed. Make : Minilec / L&T / Siemens /AE
Supply and Fix digital type ammeter 0-50 Amps range, flush type with appropriate CTs, AC, 50Hz in existing panel boards after disconnecting of cables and testing including removing of unserviceable item complete all as specified and directed Make :- AE / L&T / Secure / Enercon
M&L for push-on- tyton joint (rubber ring) of EPDM material of ISI marked suitable for cast iron pipe of 80 mm dia and testing complete all as specified and directed. Make :- Isha Elestomer/Sandhyaflex
M&L for push-on tyton joint (rubber ring) of EPDM material of ISI marked suitable for cast iron pipe of 100 mm dia and testing complete all as specified and directed. Make :- Isha Elestomer/Sandhyaflex
M&L for push-on- tyton joint (rubber ring) of EPDM material of ISI marked for jointing of cast iron pipe of 150 mm dia and testing complete all as specified and directed. Make :- Isha Elestomer/Sandhyaflex
M&L for fabrication of duct cover made out of mild steel chequered plate of 7mm thick with provision of lifting handles, fire points, ladders, pipe supports and bracings etc made out from mild steel angle iron, channel, flat iron of suitable sizes including and welding as per site requirement and carry out two coat of synthetic enamel paint of red colour to fire points and grey colour to ladder, supports, duct cover etc over a red oxide primer including removing old rusted unserviceable items complete all as specified and directed.
Cutting of existing bituminous surface/PCC hard standing by using mechanical method of any type for laying of cables/GI protection pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed Note:-PCC for making good shall be measured and paid separately
M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for making good of disturbed surfaces and for mass concrete including necessary use and waste of form work complete all as specified and directed
M&L for for PCC 1:3:6, type C2 (40 mm graded stone aggregate) as in foundations / making good of disturbed surfaces / filling mass concrete complete all as specified and directed
S&F nylon net wire mesh (like mosquito net) two meter in breadth and ten meter in length for cleaning of any unwanted particles/insect in the swimming pool.
S&F of brush assembly suitable for vacuum pool cleaner motor cap 2 HP (Make: Modi Model B 200 M or equivalent).
Supply only hard plastics teeth brush for cleaning of swimming pool, of size 30 cm length and width not less than 10 cms fixed with light grade GI Pipe 15 mm bore of 8 Mtr Length.
Supply only hard wire teeth brush of size 30 cm length and width not less than 10 cms. for cleaning of swimming pool.
Supply only Nylon wire mesh with frame 18"x18" connected with extended rods made of stainless steel 12' in length for lifting of floating suspended particles on water complete as approved by Engnr-in- Charge.
Supply and Fixing PVC floating ball, coloured, 10" dia all as directed.
Supply and Fixing PVC wire netting bag of suitable size for 10" dia PVC ball all as directed.
M&L for Preparation of old painted surfaces and applying two coats of synthetic enammel paints as directed by Engr-in-Charge on external surfaces of water filteration plant, CI suction / delivery pipes electric monoblock induction motors with brush application complete all as specified.
M&L Cleaning of silt, sludge mud accumulated at bottom of drain all around swimming pool (passing water of suction sweeper) by removing concrete/PVC covers over drain and refixing upto entire satisfaction of Engnr-in-Charge.
S&F Shaft sleeves for 83HP pump set (Suitable for kirloskar make pump set existing at site).
S&F Shaft sleeves for 12.5 HP pump set (Suitable for kirloskar make pump set existing at site).
M&L for taking out sluice valves, repairing, refacing, regrinding, replacement of gland packing and refixing back to its original position including repacking of stuffing box of sluice valve spindle all as specified and as directed for 100mm bore CI/DI pipe
All as per Srl item No 28 above but 150 mm bore dia
M&L for taking out old unserviceable pressure switches and Supply & Fixing ISI marked pressure switches of range 5.5 kg/cm2 to 7.5 kg/cm2 for pumpset complete with ball valves for isolation and fittings such as union, elbow, reducer etc Pressure switches for jockey and booster pumps shall be differential type with both high and low settings, complete all as specified and directed.
M&L for taking out old unserviceable pressure guages and Supply & Fixing pressure guages of range 20 Kg/cm2 for pumpset complete with ball valves for isolation, siphon, fittings. complete all as specified and directed.
M&L for taking out old unserviceable aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground for prevention to lightening/surge complete with anchor fastner on the wall/roof all around the building connecting to earthing strip and lightening arrestor rod etc, complete all as specified and directed.
M&L for taking out old unserviceable GI strip 32x6mm with saddles and fixing screws etc. for roof conductors and down conductors above ground for prevention to lightening/surge complete with anchor fastner on the wall/roof all around the building connecting to earthing strip and lightening arrestor rod etc, complete all as specified and directed.
M&L for taking out old unserviceable Aviation/obstruction light of any wattage and Supply, install, testing and commissioning of single dome LED Aviation Obstruction Light alongwith its connected accessories and connection of cable from MCB to AOL light complete all as specified and as directed by Engineer-in-Charge. Make :- BAJAJ /BINAY/ALTOS or equivalent. Two numbers per mast.
M&L for Painting with two coat of Red synthetic enamel paint for pipes any description, n. exc 60 cm girth including holder bats, distance pieces, etc. complete all as specified and directed.
M&L for painting of sluice valve/ NRV after prepare the surface by scarping old paint/ iron rust using steel scraping brush or any other appliances using one coat of synthetic enamel paint of existing colour complete all as specified and directed by Engr-in-Charge for 80mm dia
All as per ser item No. 38 but 100 mm dia
All as per ser item No. 38 but 150 mm dia
Excavation in trenches not exc. 1.5 m in depth and not exc. 1.5 m wide for taking out or laying PVC cable/ GI pipe of any size in soft/loose soil complete all as specified and directed.
Material and labour for sand cushioning in layer not exc. 25 cm thick spreading out, levelling complete all as specified and directed.
Supplying and laying old size bricks common burnt clay building bricks Sub class B Designation 75 complete all as specified and directed.
Returning, filling in trenches including spreading levelling, watering and well ramming in layers n.exc. 25 cm thick in soft/loose soil complete all as specified and directed.
Removing of surplus soil/excavated material to a distance not exc. 50 m away from the starting point and depositing where directed at al level not exc. 1.5 m above thestarting point complete all as specified and directed.
Supplying and laying cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, elect power cable (heavy duty) 1100 volt grade with stranded aluminium conductor including taking down old U/s cable,brick complete all as specified and directed. of following size:- Note : Excavation, earth work, sand cushioning, brick and pipe shall be measured and paid separetely under respective item of the schedule.
10 sq mm 4 core
25 sq mm 4 core
35 sq mm 3½ core
50 sq mm 3½ core
70 sq mm 3½ core
S&F in replacement new Aluminium tube lugs after cutting the damaged portion of the cables checking the electrical connections for any loose contacts after crimping of lugs all as diected by Engnr-in-Charge for following size of cables :- Note :Cost of lugs, insulation tape and connected T&P shall be included in quoted unit rate.
10 Sqmm to 16 Sqmm
25 Sqmm to 50 Sqmm
M&L for repairing the MS pipe leakage of 80/100/150 MM pipe laid in trench, with arc welding including patch up MS piece plate with 5 mm tickness including all earth work and wrapping coating and making good the surface all as directed by Engr in chage.
Supply and fix Sign boards for MES office of size 1800 x 1500mm made out with Square iron pipe medium grade 40 x40 mm as framing duly painted with one coat of red oxide and two coats of black oil paint covered both side with 2mm thick aluminium sheet rivetting on frame covered with retro reflective sheet complete & 100mm hight letters for writing details of "MILITARY ENGINEER SERVICES ASSISTANT GARRISION ENGINEER (I) COAST GUARD" both side one side in Hindi and other side in English and Symbol of MES logo as directed by Engineer -in -Charge/AGE (I) . The sign board to be fixed on 2 No 40 x 40 mm Square iron legs embedded in PCC 1:4:8 incl necessary excavation complete all as directed at the Installations as directed by Engr-in Charge. Note : The Details to be written on board shall be given by the Dept
M&L for preparing MES No of 4cm high letters with red colour radium for DG sets/Transformers/Voltage stabilizer VCB/ OCB/ RMUs/ Panels (LT/HT) / Airconditioners/ Water coolers/ Desert coolers/ Refrigerator etc complete all as directed. Note: MES No shall be given by Deptt.
M&L for street light pole painting with silver colour with white oil paint, complete from bottom to street light including bracket etc complete all as specified and as directed.
M/S BEE ESS ENTERPRISES (BID ID -3069222)
Sanjay Associates (BID ID -3082744)
GLIBS CONSTRUCTION (BID ID -3072809)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .