Redevelopment of Murasoli Maran Park North located at Perambur

Amount

Dismantling plain cement concrete work and clearing the debris etc., complete as directed by the engineer-in-charge

Dismantling GI Sheet with posts

Dismantling the existing brick or stone masonry work in cement mortar under 3m high including clearing away and carefully stacking materials useful for re-use etc., complete as directed by the engineer-in-charge

Dismantling R.C.C.works,carefully clearing away the debris as directed during execution. The dismantling of concrete as per PWD schedule of rates are to be adopted wherein a part part of the concrete only is to be dismantled and the remaining part of the concrete has to be retained structurally safe.

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Narrow Foundations for building & culvert - First Depth Upto 2m

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Refilling with excavated earth in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification.

Supplying and filling with earth up to 10 Km for foundation and basement, etc., including watering and consolidating, etc., complete complying with standard specifications and as directed by the engineer-in-charge

Construction of Wet Mix Macadam 150 mm compacted thickness in two layers by providing laying , Paving , and compacting of aggregate gradation satisfying to Table 400-13 of MORTH and satisfying he physical paraemeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mixed material to work site and laid in sensor pavers tc the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer In-Charge of work

Supplying and filling of well gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete as directed by the Dept., Officers with standard specification.

Supplying and filling in foundation, basement, etc with Crushed Stone sand filling in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid).

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kg/mᶾ and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation and Basement

For Ground Floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade using In-situ Concrete batching plant/ Ready Mix Concrete (RMC) adopting weigh batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including Conveyance of concrete from batching plant to Work site, Electricity charges and other works & labour cost involved for concrete production, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

For Foundation and basement

For Ground floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying, fabricating and errecting Stainless steel (Grade SS316) Channel fabricated and connecting with plates of 6 mm thick. The rate inclusive of cost of Stainless steel Channel section, plate, cleat angle, necessary bolts and nuts, labour charges for welding, fabricating & erecting etc., complete and as directed by the departmental officers.

Random Rubble in Lime Mortar etc., Complete complying with standard specification and as directed by the Departmental Officers.

For Foundation and basement

For Ground floor

Brick work in Cement Mortar 1:3 using best quality of Second Class Ground Moulded Chamber Burnt Bricks 9" x 4-3/8" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

For foundation & basement

In Ground floor

Outer Plastering with Cement Mortar 1:4 (One cement and Four sand), 20mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Paving the floor/dadooing with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification

Paving the floor/dadooing with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Flamed steel grey granite slab with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification

Nosing the granite slab - single nosing as directed by the engineer-in-charge

Supplying and fixing of M.S.grill of approved design for grill gate, grill work to doors and windows openings ramp etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete complying with standard specification.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), excluding putty works.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Providing granolithic floor finish of 50 mm thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

SOLID BLOCKS 40X20X20 CM Supplying and fixing Solid Blocks of following size confirming to S.S. 2145-1965 (including jam blocks closers etc.) made in CC 1:3:6 (One Cement Three Sand and Six HBSJ 6 mm) in CM 1:5 (one cement and five sand),for masonry wall partition wall including curing neat finishing etc. complete

Best Tiled roofing with Mangalore tiles, set in lime mortar 1:2 over flat tiles (15cm x 15cm x 12mm) and including teakwood reepers (50 x 12 mm), etc., complete as per standard specifications and directed by the engineer-in-charge

Supply and fixing of Portable Store room of size 8'x8'x7' and type PUF with following specifications: Structure: The supporting column at corners is made out of SHS 70mm pipe welded between The top and Base frames. The structural base frame work made out of 2mm thick SHS 70 pipe as peripheral frame work and RHS 60 x 40, RHS 60 x 40 & SHS 25 as intermediate support to Form a grid of 600mm x 600mm both ways to support the flooring. The structural Top frame work made out of 2mm thick RHS 60 x 40 pipe as peripheral frame work and RHS 60 x 40 & SHS 40 as intermediate support at an interval of 1200mm to support the roof. with 150mm Extended Leg in all Corners (Column) Flooring: The 18mm Cement particle Board place on the top of Bottom frame and Proper fasteners with Vinyl flooring Roof: The roof panels shall be made of TCT Pre coated Profile steel sheets on both side and inner portion made of PUF. Total thickness of roof panel shall be 30mm. With single side slope of roof Wall: The Wall panels shall be made of TCT Pre coated Profile steel sheets on both side and inner portion made of PUF. Total thickness of roof panel shall be 50mm. Door: Standard Puf panel Door-1 No with Pad Lock out side and Altrop inside Electrical: Switch and Socket-2No’s, Tube light-1No’s inside, outside Bulk head fittings 1No. Complete, etc., as directed by the engineer-in-charge

Supply and fixing of Portable Security Cabin of size 6'x6'x7' and type PUF with following specifications: Structure: The supporting column at corners is made out of SHS 70mm pipe welded between The top and Base frames. The structural base frame work made out of 2mm thick SHS 70 pipe as peripheral frame work and RHS 60 x 40, RHS 60 x 40 & SHS 25 as intermediate support to Form a grid of 600mm x 600mm both ways to support the flooring. The structural Top frame work made out of 2mm thick RHS 60 x 40 pipe as peripheral frame work and RHS 60 x 40 & SHS 40 as intermediate support at an interval of 1200mm to support the roof. with 150mm Extended Leg in all Corners (Column) Flooring: The 18mm Cement particle Board place on the top of Bottom frame and Proper fasteners with Vinyl flooring Roof: The roof panels shall be made of TCT Pre coated Profile steel sheets on both side and inner portion made of PUF. Total thickness of roof panel shall be 30mm. With single side slope of roof Wall: The Wall panels shall be made of TCT Pre coated Profile steel sheets on both side and inner portion made of PUF. Total thickness of roof panel shall be 50mm. Window: 1mx1m Aluminium Glass Sliding window-3No’s. Door: Standard Puf panel Door-1 No with Pad Lock out side and Altrop inside Others: Writing Pad-1 No. Electrical: Switch and Socket-2No’s, Tube light-1No’s inside, outside Bulk head fittings 1No., Wall mounted fan - 1 No. Complete, etc., as directed by the engineer-in-charge

Supplying and fixing of Semi polished granite stone bench of 5 feet length with 1.5 feet width, backrest 2 feet height, seating height of 1.5 feet from floor level and of material thickness 50 mm, including cost of materials, labours and conveyance charges, etc., complete, as directed by the engineer-in-charge

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete

Supplying and laying hydraulic pressed monolithic natural grey colour cement concrete inter locking paver block of 63mm thick, in cement concrete 1:2:4 (one cement, two sand, four aggregate) using difference design and with stand for pressure of 150 - 200 kg/m2 over the existing sand cushion by using earth rambers and also vibratting the concrete blocks often laying using plate vibrators etc, complete as directed by the departmental officers.

Paving the floor/dadooing with best approved quality Rough Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Jet black with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification

Painting with two coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and laying Pebble Flooring walkpath (8-shape) of walkpath area of 32 Sqm in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification

Providing and laying EPDM Flooring (Ethylene Propylene Diene Monomer) of 36mm thickness with proper laying materials of approved sample as per design / drawing laid compacting, levelling to required slope, finishing neatly. The rate including cost of all materials, labour charges, transportation, loading & unloading and all incidentals etc. complete complying with relevant standard specification and as directed by the Engineer-in-charge.

Cut Stone in Lime Mortar etc., Complete complying with standard specification and as directed by the Departmental Officers.

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work.

Supplying and laying Stone for gopuram and Thoon the rate inclusive of cost of materials, conveyance and labour charges, lifting charges etc.,

Charges for Designing the gopuram stone like ubabeedam pathmajagathi, ubabeedam kandam and ubabeedam kabothagam, Sthambavari, Kabothaga Vari etc.,

Ubabeedam Pathma jagathi

Ubabeedam - kandavari/ thaddi vari set

Ubabeedam - kabothagam

Adhirstanam - padma jagathi vari

Adhirstanam - kandavari/ thaddi kudam set

Adhirstanam - Kabothagam

Adhirstanam - Kumuthaga jagathi

Adhirstanam - jagathi

Adhirstanam - kumuthaga vari

Sthambavari

Thadikudam set

Veerakandagam pothigai

Uthiram

Kabothagam

Viyalavari

Thoon

Simmam

Laying cut stone flooring using new stones 0.60 x 0.60 m not less than 10 cms thick. The Rate inclusive of labour charges, materials, and coveyance charges etc.,

ELECTRICAL WORKS

TNEB METERING BOARD Metering Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. 1set of 160A with TNEB Metering provision.

Supply and fixing of 125A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with PWD earthing.

Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and Main 1no 125A 4Pole MCCB I/C, 2nos 100A 4Pole MCCB, 2nos of 63A 4Pole MCCB's and 2nos of 32A 4Pole MCCB's for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.

VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixing of 8 way vertical TPMCB sheet steel TPMCB DB with IP42 Protection of surface type fitted with bus bars and neutral links with1 No. of 40A FP MCB as Incoming and 8 Nos.of 32A,10KA Triple Pole MCB in Flush with wall and making good of the concealed portion with earth connection. (TPMCB DB with IP42 Protections)

VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB : Supply and fixing of 8 way vertical TPMCB sheet steel TPMCB DB with IP42 Protection of surface type fitted with bus bars and neutral links with1 No. of 40A FP MCB as Incoming and 8 Nos.of 32A,10KA Triple Pole MCB. The MCB DB and MCB should be with ISI mark. The above Three Phase VDB is to be erected on masonary pedestal 2nos including earth work excavation, for a depth of 2feet, PCC 1:2:4of 800mm depth, 2.5feet height concreate bed, plastering, painting etc., with earth connection. (TPMCB DB with IP42 Protections)

Supply and fixing of 7 segment 8 way 40 A FP MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single /three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 40 A FP MCB, 10kA, and another separate 4 way for accommodating one no. 40 Amps 4 pole MCB/ ELCB / RCD (totally 8 ways in one segment) ( 3x6ways in each segment ) and Seperate Provision for MCB / Isolators (totally 18nos) for sub incomers in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. i.40A 4Pole MCB - 1no. ii.32A 2Pole MCB - 3nos. iii.6A to 32A SP MCB - 24nos. The MCB DB and MCB should be with ISI mark. The above Three Phase 8way CDB is to be erected on masonary pedestal 2nos including earth work excavation, for a depth of 2feet, PCC 1:2:4of 800mm depth, 2.5feet height concreate bed, plastering, painting etc., with earth connection.

Supply and fixing of 7 segment 12 way 40 A FP MCB sheet steel distribution board (Higher end) with metal / acrylic door cover fitted with busbars and neutral links with single /three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 40 A FP MCB, 10kA, and another separate 4 way for accommodating one no. 40 Amps 4 pole MCB/ ELCB / RCD (totally 8 ways in one segment) ( 3x6ways in each segment ) and Seperate Provision for MCB / Isolators (totally 18nos) for sub incomers in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. with the following : i.40A 4Pole MCB - 1no. ii.32A 2Pole MCB - 3nos. iii.6A to 32A SP MCB - 36nos. The MCB DB and MCB should be with ISI mark. The above Three Phase 8way CDB is to be erected on masonary pedestal 2nos including earth work excavation, for a depth of 2feet, PCC 1:2:4of 800mm depth, 2.5feet height concreate bed, plastering, painting etc., with earth connection.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and laying of following XLPE armoured LTUG cable in a trench / Tray with suitable cable tie tag etc as required.

Supply and Laying of 3 1/2C x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 3 1/2C x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Laying of 4C x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supplying and Laying of 3C X 4 sqmm Flexible Multicore Cable manufactured with electrolytic grade flexible copper with FRLS conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 in suitable size of HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supplying and Laying of 3C X 2.5 sqmm Flexible Multicore Cable manufactured with electrolytic grade flexible copper with FRLS conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990 in suitable size of HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and Clamping of 4C x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc.,complete including transport charges of UG cable.

Supply and Clamping of 4C x 10 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc.,complete including transport charges of UG cable.

Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection.

Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection.

Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection.

Supply and fixing of brass cable gland suitable for 4C x 16 Sq.mm PVC armoured LTUG cable with earth connection.

Supply and fixing of brass cable gland suitable for 4C x 10 PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable)

Supply and providing cable end termination of 3 1/2 Core x 70 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 3 1/2 Core x 35 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.

Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and providing cable end termination of 4 Cx10sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.

Supply and fixing of Timer Extended Product Type AD1CO-R-15m, Long Description Analog time switch, daily proramming, 1 channel CO, 15 minutes switch, with reserve, Function : Daily, Maximum Load Capacity : Resistive load 16 A Inductive Load 4 A, Power Supply : (-15%..+10%) 230 V AC, Contact Type : Change-Over (CO), Meter Type : Electromechanical , Options Provided : With running reserve, Battery Chemical Composition : Nickel-Metal Hydride, Battery Life : 150 hour, Battery Type : Button Cell, Battery Weight : 0.004 kg, Number of Batteries : 1, Rated Operational Voltage : 230 V, Operational Voltage : Maximum (Incl. Tolerance) 195 V AC, Maximum (Incl. Tolerance) 253 V AC, Rated Frequency (f) : 50 - 60 Hz, Maximum Switching Power : 4000 W, Low Consumption Lamp (CFL) 2500 W LED 900 W, The rate is inclusive of necessary connecting accessories etc., complete. Contactor Extended Product Type AX65 - 30-11-80, CAD Dimensional Drawing : 2CDC001079B0201, Number of Main Contacts NO : 3, Number of Main Contacts NC : 0, Number of Auxiliary Contacts NO : 1, Number of Auxiliary Contacts NC : 1, Rated Operational Power AC-3 (Pe) (415V) 37 kW, General Use Rating UL/CSA : (600 V AC) 90 A, Low Voltage Products and Systems → Control Products → Contactors → Block Contactors → AX Contactors → AX65 ( Make : ABB, Product ID 2CSM208151R1000, TIMER ), ( Make : ABB, Product ID 1SBL371074R8011, CONTACTOR )

Indoor and Outdoor Lights

Supply & Installation of Customised 60W Juno-Column light luminaire designed for surface mounted. Shielded light distribution. Luminaire made of spun aluminium with extruded aluminium alloy (grade 6063) and non corrosive stainless steel fasteners. Translucent acrylic diffuser. Pressure die cast aluminium mounting plate 250mm dia round x 12mm thick with 4 elongated holes 38 x 19 to suit M16 bolts at CC 140 with pure polyester powder coating.The base plate have a cable entry hole of 65mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Protection class IP65. Mechanical resistance IK08. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >88%, Power factor >0.95, THD <10%, Surge protection 6KV. Luminaire dimension : 600mm dia round x 3500mm height. CE & BIS Certified. Inhouse NABL accredited lab with LM 79 Testing facility. The rate is inclusive of Foundation Bolt - 4 Nos of Necessary M16 Foundation work J Bolt Length 300mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each Bolt - Suitable for Juno Column Lighting. ( Make : Model No. KL7034 or equivalent )

Supply & Installation of Customised 36W pole top Juno Midi luminaire. Beam angle 120°. Luminaire made of spun aluminium, integrated with extruded aluminium pipe along with pressure die cast aluminium base through supporting arms made fo gravity die cast aluminium and non corrosive stainless steel fasteners. Diffuser placed into the provision formed on the pheriphery of the bottom cover. Translucent acrylic diffuser. Suitable for mounting on Ø50mm OD pipe. Protection class IP65. Mechanical resistance IK07. Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. LIGHT LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD <10%, Surge protection 4KV. Luminaire dimension : 420mm diameter x 430mm height. CE & BIS Certified. Inhouse NABL accredited lab. ( Make : Model No. KL 5380 or equivalent. )

Supply and fixing of Outdoor Termination PVC Box. The cost is inclusive of gland, lugs and termination) with all fixing accessories etc., complete.

Supply & Installation of 50W LED compact and robust flood light luminaire designed to provide uniform illumination in open spaces. Beam angle 10°. Extruded aluminium hood cover integrated with die-cast module and extruded aluminium alloy tube (grade 6063), excellent thermal management heat sink & polycarbonate optical lens. Adjustable clamp made of stainless steel (2mm thickness) to facilitate proper aiming of the luminaire at desired angle. Pressure die cast aluminium mounting plate Ø100.5 x 4mm thick with 2 elongated holes 15 x 10 to suit M8 bolts at PCD 55 with pure polyester powder coating. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Cable entrance via PG9 cable gland. All external screws are made of stainless steel. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. RGBW, Colour rendering index (CRI)>80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.90, THD< 10%, Surge protection 6KV. Luminaire dimension : 166mm diameter x 168mm width x 584mm height. CE & BIS Certified. Inhouse NABL accredited lab. ( Make : K-LiTE KL 4331 or equivalent )

Supply & Installation of 12W LED surface mounted compact spot light designed to provide directional light. Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass of 4mm thickness. Pressure die-cast aluminium surface mounting base. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK07. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 6500K, Colour rendering index (CRI)>80. High Quality LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.95, THD <10%, Surge protection 4KV. Luminaire dimension : 113mm length x 84mm width x 117mm height. CE & BIS Certified. Including accessory Visor. Inhouse NABL accredited lab. ( Make : Model No. KL 4268 or equivalent. )

Supply & Installation of 12W LED spike mounted compact spot light designed to provide directional light.Beam angle 15° / 25° / 40°. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive stainless steel fasteners. Clear toughened glass of 4mm thickness. Surface mounting spike made of polypropylene. Hybrid optics with lens & mirror finish pure aluminium reflector combination for higher efficiency, lower optical losses with optimum glare suppression. Swivel range of 0° - 90°. Single cable entrance M10 cable gland. Protection class IP66. Mechanical resistance IK07. Pure polyester powder coated RAL 9004 Signal black, RAL 9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 6500K, Colour rendering index (CRI)>80. LIGHT LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.95, THD <10%, Surge protection 4KV. Luminaire dimension : 113mm length x 100mm width x 451mm height. CE & BIS Certified. Including accessory Visor. Inhouse NABL accredited lab. ( Make : Model No. KL 4267 or equivalent. )

Supply & Installation of 16W LED Bollard luminaire designed for surface mounted. Symmetrical light distribution. Luminaire made of extruded aluminium (grade 6063), pressure die-cast aluminium components of high corrosion resistance and non corrosive stainless steel fasteners. Reflector system made of spun aluminium (powder coated white). Clear polycarbonate diffuser. Pressure die cast aluminium mounting plate 167mm diameter x 4mm thick with 4 elongated holes 20 x 14 to suit M12 bolts at PCD 110 for surface mounting on floor. The base plate have a cable entry hole of 75mm dia at the center. This mounting plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. Single cable entrance via PG7 cable gland. Protection class IP65. Mechanical resistance IK10. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K. Colour rendering index (CRI)>80. High Quality LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.95, THD <10%, Surge protection 3KV. Luminaire dimension : 166mm diameter x 970mm height. CE & BIS Certified. Inhouse NABL accredited lab. The rate is inclusive of Foundation Bolt - 4 Nos of M12 Foundation J Bolt Length 300mm, 2 Nos of (Spring Washers, Plain Washers and Nuts) for each Bolt with suitable civil foundation etc., complete. ( Make : Model No. KL 5565 or equivalent. )

Supply & Installation of 6W LED compact and robust wall recessed luminaires for illuminating walls and stairs. Forward asymmetrical light distribution. Luminaire made of pressure die cast aluminium alloy of high corrosion resistance and non corrosive A2 stainless steel fasteners. ABS plastic installation housing for preparing the recess opening in wall / stairs. Clear acrylic diffuser. Single cable entrance via M10 cable gland. Protection class IP65. Mechanical resistance IK09. Pure polyester powder coated RAL 9004 Signal black, RAL9007 Grey aluminium, RAL 7016 Anthracite grey, Graphite grey. Available colour temperature 2700K / 3000K / 4000K / 5700K, Colour rendering index (CRI)>80. High Quality LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >80%, Power factor >0.90, THD <10%, Surge protection 2KV. Luminaire dimension : 130mm length x 87mm width x 76mm height. Luminaire installation in a recessed opening cut-out dimension : 124mm length x 83mm width x 70mm height. CE & BIS Certified. Inhouse NABL accredited lab. ( Make: Modle No. KL 2747 or equivalent. )

Supply & Laying of Niva 15 surface mounted compact flexible linear LED lighting with system wattage of 9W/m. Beam angle 120° diffused. Luminaire housing and diffuser made of silicone, UV proof for true outdoor application. High light transmittance, environmental silicone material. Top bendable. Cut-able for flexible application. Even light distribution & no hot spots. Aluminium mounting profile / Flexible mounting channel for surface mounting on ceiling / wall / floor. Protection class IP67. Mechanical resistance IK08. Available colour temperature 3000K (Other CCTs on request), Colour rendering index (CRI)>80. Operating temperature range is from -15°C to +50°C. Constant voltage non integral power supply at 24Vdc assures safety. Luminaire dimension : 1000mm length x 15mm width x 15mm height. KL 8399 - Mounting Chain Included. Inhouse NABL accredited lab. ( Make: LIGHT ID : 3396 or Equivalent. )

Supply and fixing LED Control Driver of 24V Series Waterproof IP67 Power Supply 24V DC, 6.25 Amps 150WDimension: 313 x 43 x 34. The rate is inclusive of labour charges etc., complete. ( Make : KL-8198 )

Supply & Installation of 7M height Brussel pole made of circular mild steel pipe of two section (grade YST 210) which is fabricated using 139.7mm diameter x 3.6mm thick base section with height of 2000mm, the top section is 88.9mm diameter x 2.9mm thick with minimum height of 4978mm. & 4 Nos. of Die-cast aluminium mounting clamp (126mm dia x 60mm height) for fixing 8 Nos. of 50W flood light luminaires. Pole mounted flood light luminaires. Extruded aluminium hood cover integrated with die-cast module, excellent aluminium heatsink for thermal management with vertical fin design for longer life of the LEDs. Bracket to facilitate proper aiming of the luminaire at desired angle. Protection class IP65 optical compartment with polycarbonate optical lens and Mechanical resistance IK10. The luminaire provided with beam angle 10° / 28° / 45° (Symmetrical light distribution). Available colour temperature 2700K / 4000K / 5700K, colour rendering index (CRI)>/=80. K-Lite LED module with expected service life of at least 60,000 operating hours. Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. Driver efficiency >85%, Power factor >0.95, THD< 10%, Surge protection 6KV. electrical Class I wattage 50W ± 10%. High power LED (Make: Nichia) with Macadam </= 3. CE & BIS Certified.

Inhouse NABL accredited lab. The pole is to be provided with a surface mounting suitable base plate 300 mm square x 16 mm thick steel of grade E250 to IS 2062 : 2011. All dimension are within +/- 5% tolerance. Pole section welded by certified welders using high end MIG welding processes. 3Nos. of PDC aluminium service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable, 6A SP MCB and 32A Ramanuj stud type 4 way terminal block for loop-in / loop-out arrangement, 5A 2 Way terminal connector and provision for earthing. Any other internal cables and connections shall not be covered in the scope of supply. The mild steel mounting base plate. The mounting plate provided with 4 elongated holes 48 x 24 to suit M20 x 500mm bolts of grade 4.6 at CC 215 for alignment of the pole. The base plate have a cable entry hole of 70mm dia at the center. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed foundation. After fabrication, entire pole is shot blasted (Inhouse). The pole is coated with zinc rich primer & pure polyester powder coating or epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint (coating thickness 60-80 microns). The Pole shall be provided with Graphite grey / Anthracite grey / Black as standard colour options. ( Make: K-LiTE ID : 1063 or Equivalent. )

Supply & Instalaation of 60W Cylin Mega Compact and efficient ceiling mounted down lighters. High protection class & lumen output makes it versatile solution for both indoor & outdoor applications • Luminaire made of pressure die cast aluminium with non corrosive stainless steel fasteners. IP 65 • Clear toughened glass. • Silicone gasket. • Polycarbonate optical lens. • Surface mounting on ceiling using hardware after connecting to the power supply. • Cable entries for through-wiring of mains supply cable. • Integral constant current power supply • CRI (Ra) : >70 • Prewired with LED driver and suitable for operating on 240V, 50Hz single phase ac supply. • CCT : 2700K, 3000K, 4000K, 5700K Mandatory CE Marking, BIS Certification, LM 79 report, IP, IK Report from NABL accredited Lab. ( Make: K-LiTE, Model No. KL 3628) or equivalent.

Supply and Fixing of 40W 4' LED Tube with Light fitting TW round block fixing ceiling or on wall with PVC unsheathed copper leads from terminals to the fitting. (Make : Philips / Crompton / Havelles ).

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18").

Supply and fixing of 375mm (15") sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required.

Supply and fixing of louvers shutter arrangements for 300mm(12")sweep (Heavy duty) AC Exhaust fan complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 1 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.).

Supply and fixing of 2Nos 6A modular (2 in one 3pin socket) wall socket with control switches and 1 No. 6A/16A 3pin switched socket (16A Switch and Socket combined) with suitable MS modular box covered with Modular 9 module white plate on wall with earth connection (For cctv monitor socket)

Supply and fixing of 1 No. 6A/16A 3pin switched socket(16A Switch and Socket combined) with control switch (Crabtree / Legrand / Hager / Equivalent) in suitable MS modular Box covered with Modular 3module white plate in wall with earth connection.

Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp.

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.

Supply and Run of 1 of No.8 SWG Copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Coil earth to street light poles with No.8SWG GI wire of 11.5metres of length in which 10metres of total length compressed into a coil of one meter length (75mm to100mm dia ) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.

Supply and fixing SFRC manhole chamber size 750 x750 mm square manhole cover only Using M30 concrete rate includes of excise duty, Transporation charges, all other materials whichever necessary and labour charges etc as directed by the departmental officers.

Supply and Laying in position the best quality and 120mm dia HDPE pipes of ISI mark, providing leak proof joints etc and making connectin to all sanitary fittings, including dismantling masonry / RCC works whereever necessary and making good the dismantled portions to the original condition complying with standard specification.

Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output □ HDMI1 / VGA1 outputs provided □ HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access □ Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces.

Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification: ●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behaviour analyses ( Line crossing detection, intrusion detection) ● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied ●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB, ● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W ● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse.

IP BASED VARIFOCAL LENS DOME CAMERA: Supply, Testing and Commissioning of 5MP Varifocal Motorized Dome IP Camera with following specification: Image Sensor: 1/2.7” Progressive Scan CMOS Effective Pixels: 2592 × 1944 Shutter Speed: 1 s to 1/100,000 s S/N Ratio: ≥52 dB Angle Adjustment: Pan : 0°~360°, Tilt : 0°~77°, Rotation : 0°~360° Video Compression: H.265 / H.264 / MJPEG H.264 Compression: Standard Base Line / Main Profile / High Profile H.265 Compression: Standard Main Profile @ Leve4.1 High Tier Resolution : 5MP(2592×1944), 4MP(2560×1440), 3MP(2304×1296), 1080P(1920×1080), 720P (1280×720), D1, CIF, 480×240 30m IR, Micro SD Slot, Ingress Protection: IP67 Digital Zoom: Yes Image Features: Defog, BLC, HLC, 2D/3D DNR Corridor Pattern: Yes Video Privacy :4 zones video mask Power Supply: DC12V / PoE Power Consumption: < 9.5W.

Supply, Installation, Testing and Commissioning of 42" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).

Supply and fixing of outdoor 4X6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.

Supply and Laying of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal) IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.

Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.

Supply and laying of armoured, Singlemode, Thermoplastic Tape Inner Sheathed, PVC type sheathed 6 core Optical Fibre Cable with unique fiber excess length control method provides the cable with excellent mechanical and environmental properties and Cable - 2 Embedded FRP provides tensile strength & Anti-buckling properties. It is processed with Filling jelly - Thixotropic jelly to prevent Water ingress in loose tube.

Fixing and Termination of Optical Fibre Cable Single Point ( Point to Point ) Splicing and arrangement charges.

Supply and fixing of OFC PVC Black Colour Box 1'x 3/4' x2 PVC Black colour Box".

Supply and fixing of 24 Port 2SFP with Module, PoE Giga Range Lan Switch.• 24 Ports 10/100/1000 Base-T PoE + 4 x Combo Gigabit UTP or Gigabit SFP slots • Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard • Equipped with IEEE 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Access Control List (ACL) feature to enhances network security • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Support Web-based GUI, Smart Console , Network Assistance Utility • Cable diagnostics function to help troubleshooting wiring problem including Optical Fiber Cable connecting network accessories.

Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. ( Make : DLINK, NETGEAR / TPLINK ).

Supply and Fixing of Rack with Accessories -Higher end 4 U Rack and fan extra for the above rack.

Supply and Fixing of Rack with Accessories -Higher end 12 U Rack with LNS unit and fan extra for the above rack.

Supply and fixing of 2 feet CCTV Camera Stand with attachment fittings as follows: * Weather heads and couplings * Cabinet mounting fittings, plates, brackets as needed. * Reinforced couplings for wire entrances to cabinets.

Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up

Supply and fixing of 6m Length pole with base plate of size 250x250x6mmas per IS-875 with following specification. Pole Outer die -76.10mm x 3.65mm Thick x 6 meter. Excavation, PCC, shuttering, reinforcement, Concreting for fixing the post. The Rate is inclusive of curing with all necessary materials. (300x300x600).

PA System

Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent).

Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent).

Supply and run of 2core 1.5 Sqmm armoured speaker cable in suitable size of 38mm/50mm HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

SAFETY SYSTEM

Supply of 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS. Set (5 Nos).

Supply of First Aid Box complete with all First Aid Medicines.

Supply of Shock Treatment Chart fixed in glass frame.

Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms.

PEARL ENGINEERS CONSTRUCTION CO-OPERATIVE SOCIETY (BID ID -1442560)

C.V.T ENTERPRISES (BID ID -1442432)

Eashaa Engineers (BID ID -1442188)