LOT01

Amount

Providing and fixing 150 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge with cost of all material, carriage, labour, T&P etc. Complete of work.

Providing and fixing 100 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge with cost of all material, carriage, labour, T&P etc. Complete of work.

Providing and fixing 80 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge with cost of all material, carriage, labour, T&P etc. Complete of work.

Providing and fixing 65 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge with cost of all material, carriage, labour, T&P etc. Complete of work.

Providing and fixing 20 mm dia Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge with cost of all material, carriage, labour, T&P etc. Complete of work.

Construction of single tap pillar type stand post as per type design

Construction of following type chambers as per department type design and drawing including Heavy duty M.S. Manhole Cover and all materials labour T&P etc complete for proper completion of work as per instructions of Engineer-in -charge.

Fire Hydrant chamber (750 (L) X 450 (W) X 1000 (H) mm

Air Valve Chamber 350 (L) x 350 (W) x 500 (H) mm

Scour valve chamber dia upto 200mm ,1000(L)*1200(B)*1300(H)mm

".Supply and carting up to site of work of the following dia DI butterfly /sluice valves class I working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments including valve fittings & Dismantling Joints as per requirement F.O.R. destination and lowering them into the already prepared trenches fixing in position and jointing them with pipelines and testing etc. complete and also including supply of jointing materials etc. complete .including all taxes and insurance as per instructions of Engineer -in -charge

Sluice valve ‐ 80 mm dia in pipe line N/C Kalagarh

Scour valve ‐ 80 mm dia in pipe line N/C Kalagarh

Supply and installation testing etc. of single/double ball type air valve conforming tolatest/relevent I.S. specifications including all taxes and insurance carting up to site of work and lowering them into the trenches fixing in position and jointing them with pipelines and testing etc. complete (including supply of jointing materials and Valve fittings etc complete) as per instructions of Engineer.

Air valve 20mm in pipe line N/C Kalagarh

Supply of underground sluice valve type fire hydrant consisting of 80 mm dia sluice valves 80 mm dia tail pieces 80 mm duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete confirming to latest/relevant I.S. specifications including all taxes and insurance up to site of work and lowering then into the trenches fixing in position and jointing them with pipelines and testing etc. complete (including supply of jointing materials and valve fitting etc.) complete as per instructions of Engineer-in-Charge.

sluice valve type fire hydrant

Providing and fixing C.I. sluice valve (with cap) complete with bolts, nuts,rubber insertions etc.(the tail piece if required will be paid separately)

150mm dia class 2 in pipe line N/C Kalagarh

200mm dia class 2,1No. At tubewell, 1 No for OHT

250mm dia class 2, 3Nos. at tubewell -4, 3Nos. at tubewel-1

Providing and laying S&S centrifugal cast (spun)/ductile iron pipe of diameter 200mm confirming to IS 8329. for distribution system including treanching jointing , jointing materials like lubricants , lead , gasket insertion And specials like tee bends , reducers ,collars etc used ,

200mm dia ductile iron class K-7 pipe

"""Providing and laying Double Flanged (Screwed! Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 :. for Rising Main"" including treanching , jointing ,jointing materials and specials used like tee , bends ,reducers etc "

250mm dia ductile iron class K-9 pipe

Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3, for pipe line, including supply of MS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of engineer in charge.

Design and construct Thrust Block made in Reinforced Cement concrete (1:1.5:3), with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, as per technical requirements .

Providing reinforcement of Thrust block for reinforced concrete work including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary),cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with wire at very intersection, complete as per drawing and direction.

Ordinary centering and shuttering of ply wood or steel for R.C.C work.

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design bicks of class designation 7.5 with cost of all material, carriage, labour, T&P etc. Complete of work.

Making house connection should be done atleast 2 m inside the boundary wall with provision of tap from distribution line to outer wall of house with supply of 1 m above GL G.I. pipe ( 15 mm ) (above ground ) & average 5 mtr. MDPE Pipe ( 20 mm) ( below ground) including specials saddle Tap etc. of suitable size T&P etc. including excavation laying and jointing for proper completion of work as per instructions of Engineer as per Dwg 12( excluding road restoration)

"Grouting in cracks with epoxy Araldite GY-257,Hardner HY-140, through nipple , including cost of all materials, labour and T&P compelete work for 400KL OVER HEAD TANK (OHT) Repair work. "

Material and labour for 5 mm thick epoxy plaster with Araldite GY 257-100 parts, HY 840-46.5 parts, HY 960-3.5 parts and quarts sand 850 parts with preparation of surface by cutting old/weak material (plaster) and chipping the surface with scrapers wire brush and applying primer with araldite GY257-100 parts and hardner HY 840-50 parts by weight and finally seal coat with Araldite GY 257-100 parts, hardner HY 830-45 parts, HY 850-15 parts, silica floor-20 parts and flow control -2 parts complete all as specified and directed by Engineer-in –charge

"Laying of 35 mm thick Cement Concrete 1:2:4 mix in floor i/c cost of all material, labour, dismantling damage/rough surface, T&P etc. Complete of work, as per directions of Engineer in charge. "

Applying smart care epoxy TriBlock superior quality Asian Paint,in two coat on surface of approved make including all cost of Paint, material, labour, T&P etc. complete. - INTERIOR AREA OF TANK

Material and labour for exterior wall paintingwith acrylic emulsion paint of approved brand (Asian/Nerolac/Berger/Birla) in two coat on old surface with one coat of approved brand of primer including preparation of old surface complete all as specified and directed by Engineer-in-charge

E/W in excavation in dry soil including lift upto 1.5 M & lead up to 30 M and including back filling i/c cost of all labour, T&P etc. complete of work.

12 mm thick Cement Sand Plaster in 1:4 C.M. i/c all cost of material, labour,T&P etc. complete of work.

M -150 Brick work in 1:4 C m in one brick thick wall i/c cost of all material, labour, T&P etc. Complete of work.

C .C work 1:3:6 in 20-40mm guage size stone ballast for base coarse i/c all cost of material, labour,T&P etc. complete of work. As per directions of engineer in charge.

Laying C.C. 1:2:4 mix i/c cost of all material, labour, T&P etc. complete of work, As per directions of Engineer in charge.

R.C.C. work with cement approved coarse sand and 2cm approved grit in proportion of 1:2:4 including reinforcement and its bending, its fixing and binding the same with 24 B.W.G. G.I. binding wire and including necessary centring & Shuttering etc i/c all cost of material,labour,T&P, dismantling of old roof etc. required for proper completion of work.

Supply and fixing 6 to 8 mm thick ivory or light shades vitrefied tiles 600 x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approvedquality complete including supply of all materials labour tools and plants etc required for proper completion of the work, as per direction of Engineer-in-charge

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overfiow pipes but without fittings and the base support for tank.

Laying Cement Concrete in 1:5:10 mix (1 cement :2 coarse sand 2.20 fineness modulus :4 graded Stone aggregate 20 mm nominal size) with mechanical mixing including all cost of cement bag, material, labour, T&P, water arrangement above 200 m distance and as per direction of Engineer-In-Charge etc. Complete in all respect.

Laying corse sand layer of 150mm thickness in bottom of trench prepared in form of bedding under the plastic pipe to avoide the protection from sharp stone/Kankar etc.As per IS 7634 (Part 3) :2003 clause 6.2.3 Trench Bottom.

DEV ENTERPRISES (BID ID -5711802)

M/S SHIV SHAKTI CONSTRUCTION (BID ID -5702242)

BROTHERS BIJ CONSTRUCTIONS (BID ID -5712713)