REWIRING AND REPLACEMENT OF CERTAIN BLDGS ELECTRICAL FITTINGS AND FIXTURES CEILING FAN EXHAUST FAN DISTRIBUTION BOX SUBMAIN WIRING AND BLGD SECURITY LIGHT OF ZONEA AT JASAI MIL STN UNDER GE ARMY BARMER

Amount

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) etc complete and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. (Note : Taking down unserviceable fittings such as switches, socket,ceiling rose,pendents etc shall be measured and paid seperately)

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs,isolator, etc complete all as specified and as directed.

Taking down existing unserviceable sub main wirings with PVC conduits / PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and as directed .

All as per Item No 3 above but without taking down steel /PVC conduits.

M&L point wiring with 1.5 Sqmm (nominal area) FRLS cable 1100 Volts grade, PVC insulated, multistranded, single core unsheathed, copper conductor cables drawn through and including Concealed in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes of suitable size with 3 mm thick hylam sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell point controlled by one ,one way switches as specified and directed.complete all as specified and as directed .

All as per item No. 5 above but One light point controlled by 2- way switches, with cables 1.5 sqmm size.complete all as specified and as directed .

All as per item No. 5 above but one 5 Amps 3/5 pin socket outlet on the same board with other switches.

All as per item No.5 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 5 above but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on indipendent board.

M&L point wiring with 1.5 Sqmm (nominal area), FRLS cable 1100 Volts grade, PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including PVC casing caping with all fittings and accessories of PVC casing caping (like Tee, bend etc.) complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including including PVC Surface Boxes of suitable module with top cover sheet fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one ,one way switches as specified and directed. complete all as specified and as directed .

All as per item No 10 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switch.

All as per item No 10 here-in-before but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 10 here-in-before but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on independent board.

All as per item No 10 here-in-before but wiring in existing conduit / casing caping for one light/fan/bell point controled by one , one way switch 5 Amps .

All as per item No 14 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switch.

All as per item No 14 here-in-before but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 14 here-in-before but wiring with 4 sqmm copper cables with 4 Sqmm copper cable as continuous earth wire for one 5/15 Amps switch socket outlet on indipendent board.

M&L point wiring with 1.5 Sqmm (nominal area),FRLS cable 1100 Volts grade, PVC insulated, multistranded, single core unsheathed, copper conductor cables drawn through and including Concealed in PVC Conduits with all accessories complete fixed to walls /ceiling etc. with and including 1.5 Sqmm (nominal area) PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point including 1.6 mm thick mild steel sunken boxes /Modular type Metal flush box including cover plate with frame of suitable size for mounting switches, sockets, regulators etc complete for one light/bell point /ceiling fan/ exhaust fan controlled by one ,one way switches as specified and directed.complete all as specified and as directed .

All as per item No. 18 above but one 5 Amps 3/5 pin socket outlet on independent board.

All as per item No. 18 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switches.

All as per item No. 18 here-in-before but wiring with 4 sqmm copper cable with 4 Sqmm copper cable as continuous earth wire for one 5/6 pin /16 Amps socket out let on independent board.

S&F in replacement switch piano, flush button, 5/6 Amps single pole, one way, 230 Volts.complete including taking down old all as specified and as directed .

S&F in replacement Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts.complete including taking down old all as specified and as directed .

S&F in replacement socket outlet, 3/5 pin, 5 Amps, flush type. complete including taking down old all as specified and as directed .

S&F in replacement switch socket outlet, 3/5 pin, 5 Amps, flush type. complete including taking down old all as specified and as directed .

S&F in replacement Switch socket outlet multi-purpose 3pin, 15 Amp and 3 pin, 5 Amps controlled by one switch.complete including taking down old all as specified and as directed .

M&L in replacement Ceiling rose surface bakelite 65x50 mm, two to three terminals.complete including taking down old all as specified and as directed .

S & F in replacement Bell push,flush type,5 Amp. including taking down old complete all as specified and as directed .

S&F in replacement Modular switch 1 way 6A, 1 module complete all as specified and directed .

S&F in replacement Modular switch 1 way 16A, 1 module complete all as specified and directed .

S&F in replacement modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed .

S&F in replacement modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed .

S&F in replacement modular type fan regulator 120 Watts , 2 module , complete all as specified and directed .

S&F in replacement modular type bell push switch , 1 module , complete all as specified and directed .

S & F in replacement of White cover plate with frame, 2 module complete all asa specified and directed.

All as per item No 35 above but 3 module

All as per item No 35 above but 6 module

All as per item No 35 above but 8 module

S & F in replacement Buzzer,Ding Dong AC,230 volts,single pole. including taking down old complete all as specified and as directed .

S & F in replacement stepped type electronics fan regulator flush type 220 Volt 100 Watt on the existing phenolic laminated sheet etc all as specified and as directed .

S & F in replacement electronics modular fan regulator flush type 220 Volt 100 Watt on the existing phenolic laminated sheet etc all as specified and as directed .

M & L in replacement decorative integrated LED 10 watt of colour temp 3000/5700/6500K bulk head luminaire comprises of acrylic diffuser & frame etc. with accessories complete all as specified and directed

S&F LED light fitting 20W with batten ( integrated driver), 04 feet, 3000K or 5700K colour temp, decorative type with all accessories internally pre wired and connectiong up with twin core copper conductor cable with suitable size taking down old fitting complete all as specified and as directed. Make : Crompton/Havells/Wipro

S&F LED Post Top Light 25W Aluminium Die Cast WWH 3000K Colour Temperature IP 65 with all accessories internally pre wired and connectiong up with twin core copper conductor cable with suitable size taking down old fitting complete all as specified and as directed. Make : Crompton/Havells/Wipro

Supply and fix in replacement LED Tube Rod ( integrated Driver),3000K or 5700K colour temp, 4 feet long of 18/20 watt in existing tube light fitting complete all as specified and directed. Make - Crompton/ Havells/ Wipro

Supply and fix in replacement recess mounting low glare LED panellight 36 watt 3000K or 5700K for armstrong/grid ceiling or similar ceiling mounting system with concealed complete prewied using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed. Make: Crompton/Havells/Philips. Note : Rate for removing of existing unservieable old luminaire deemed to be inclusive in quoted rates.

S & F in replacement Lamp holder insulated body with black plate suitable for batten fitting complete all as specified and as directed . Make - Crompton/ Havells/ Philips/Bajaj.

M & Lin replacement for 5 watt LED Downlight 3000K or 5700K colour temp flat down light back lit, recess mouting round /square type complete with all attachment all as specified and directed of Make - Crompton/ Havells/ Philips.

M & L in replacement for 7 watt LED Downlight 3000K or 5700K colour temp slim down light edge lit, recess mouting round / squre type complete with all attachment all as specified and directed of Make - Crompton/ Havells/ Philips.

S & F in replacement flexible LED strip/rope (05 meter each) 3000K colour temp warm white light with driver. Make: Havells/ Crompton/Wipro.

S & F in replacement LED 25 Watt street light fitting with IP-66, Dust and water resistant, secondary lenses etc. for bldg secutiry complete with light grade GI brackets, Nuts, bolts with omplete with all accessories internaly pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable for wall mounting as specified and directed by Engineer in charge Make - Crompton/ Havells/ Philips.

S&F in replacement PVC board of size 30 cm x 25 cm x 5cm depth including taking down old one as directed.complete all as specified and as directed .

S&F in replacement PVC board of size 25cm x 20cm x 5 cm depth including taking down old one as directed. complete all as specified and as directed .

S&F in replacement PVC board of size 20cm x 15cm x 5 cm depth including taking down old one as directed. complete all as specified and as directed .

S & F in replacement hylum sheet 3mm thik top cover of size 30cm x 25cm x 3mm including taking down old complete all as specified and as directed .

S & F in replacement hylum sheet 3mm thik top cover board cover of size 25cm x 20cm x 3mm including taking down old complete all as specified and as directed .

S & F in replacement hylum sheet 3mm thik top cover board cover of size 20cm x 15cm x 3mm including taking down old complete all as specified and as directed .

M&L Sub main wiring with 6 sqmm (Nominal area)FRLS cable 1100 Volts grade, with two runs of single core cable PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through PVC casing-caping of suitable size, fixed to wall/ceiling etc including 6 sqmm (nominal area) single core, PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point complete all as specified and as directed . (Note :- Two runs cables and one run of earth wire incl PVC casing caping will be measured as one length.)

All as per item No 58 here-in-before but with 4 sqmm cables and 4 Sqmm earth continuity conductor. complete all as specified and as directed .

All as per item No 58 above but 6 Sqmm drawn through existing serviceable conduits/PVC casing capping .

All as per item No 58 above but 6 Sqmm drawn through PVC concealed conduits.

All as per item No 61 above but 4 Sqmm .

S&F in replacement factory made board distribution in sheet steel enclosure without bus bar SPN, 2 way, 240 Volts suitable for fixing MCBs.complete all as specified and as directed ..

S&F in replacement Factory made board distribution in sheet steel enclosure with 200 Amps rated bus bar SPN, 4 way 240 Volts suitable for fixing MCBs.complete all as specified and as directed ..

All as per item No 64 above but SPN, 8 way, 240 Volts.complete all as specified and as directed .

All as per item No 64 above but TPN, 4 way, 415 Volts. complete all as specified and as directed .

M&L for taking out old unserviceable MCCB TP/TPN four pole from existing LT panel board and supply and fix MCCB TPN 100 amps capacity, rup capacity 25 KA at 415 volt 50 Hz AC supply including necessary modification in panel board if required to fix the MCCB complete with replacement of incoming and out going cable connection with lugs, aluminium conductor cable of proper size, nuts bolts all as directed.replacement of brunt lugs and wire/cable pieces etc as required at site. Make : Legrand / Indoasian / C&S

S&F MCB, SPN, 240 Volts, 5 to 32 Amps.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

S&F MCB, SPN, 240 Volts, 40 Amps.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

S&F MCB, SPN, 240 Volts, 63 Amps.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

S&F MCB, SP, 240 Volts, 5 to 32 Amps.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

S&F MCB, SP, 240 Volts, 40 Amps.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

S&F MCB, SP, 240 Volts, 63 Amps.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

S&F MCB TPN 63 Amps. 415 Volts complete all as specified and as directed .(Make :- Legrand,Model 603308) Make : Legrand / Indoasian / C&S

S&F Blanking plate for filling gap of MCB.complete all as specified and as directed . Make : Legrand / Indoasian / C&S

Supply and fixing in replacement single pole neutral enclosure with two pin and earth plug and socket modular type complete with one single pole MCB 20 Amps Make : Legrand / Indoasian / C&S

Taking down ceiling fan/Wall Mounting Fan , any size and sweep from its position and transport to workshop for servicing,dismantling for servicing including removal of bearing,bushes,condenser, connector, flaxible cord,split pin etc if required removing old grease and refill fresh, lubricating bushes along with new washers, cleaning and washing fan blades, fan body etc with soap solution after repairing, re- assamble the same and transporting from workshop to any location in Jasai and fixing to position / location as directed, connecting to electric system, testing etc complete all as specified and as directed . Note : -(i) Replacement of parts/rewinding shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of transporting fan from any location in Army Area to MES store & taking down unserviceable/ defective parts. (iii) Item such as bearings, gun metal bushes, capacitor, shaft etc required for replacement shall be measured and paid seperately as supply only.

All as per item No 77 above but for Exhaust fan of any size and make.

Spray painting of ceiling fan, fan blades, down rod, canopy etc with a coat of Ist quality synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as specified and as directed.

Supply only fan blades (set of three) of any make / type of ceiling fan of size 1200mm/1400mm sweep complete all as specified and as directed .

Supply only U clamp complete with nut bolt washer, split pin and rubber weal etc complete all as specified and directed by engineer in charge.

M&L for Cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

M&L Cutting and taking out old burnout winding of 230 mm sweep exhaust fan / wall fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc and testing complete all as specified and as directed .

All as per item No 83 above but for 300 mm sweep

All as per item No 83 above but for 380/450 mm sweep

M&L Spray painting of exhaust fan of any size and make with a coat of Ist quality synthetic enamel paint of approved colour and quality including preparation of old painted surfaces, cleaning etc and printing the fan numbers etc with black paint complete all as specified and as directed.

Supply only ball bearing suitable for ceiling fan / exhaust fan of any sweep complete all as specified and as directed .

Supply only gun metal bush suitable for ceiling fan of any sweep complete all as specified and as directed .

Supply only gun metal bush suitable for exhaust fan of any sweep complete all as specified and as directed .

Supply only condensor 2.5 MFD suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply only condensor 4 MFD suitable for exhaust fan / wall mountaining fan of any sweep complete all as specified and as directed.

Supply only for replacement metalic bottom plate of ceiling fan of any sweep complete all as specified and as directed.

S&F in replacement 230 mm sweep Exhaust fan (plastic body) minimum three star rating with accessries complete all as specified and as directed. Note :- Old exaust fan must be deposited to MES store yard.

S&F in replacement 300 mm sweep Exhaust fan metallic body minimum three star rating with accessries complete all as specified and as directed . Note :- Old exaust fan must be deposited to MES store yard.

Dismantling and taking down carefully the existing unserviceable geysers of any storage capacity, any make, any model fixed in any position by disconnecting from electric connection and water inlet, out let connection and vent pipes etc from site (inside or outside bldgs) and transporting the same to MES E/M Office Jassai Store Yard for carrying out repair work such as over hauling / brazing welding etc and painting with one coat white colour synthetic enamel paint and re-fixing in same position including making good disturbed surface after complete repair work and reconnection of inlet, outlet pipe and vent pipe including testing complete all as specified and as directed. Note : - (i) Replacement of parts shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of replacement of 4 Nos foundation bolts,nuts,washers of suitable size.

S&F in replacement of thermostat switch 240 volts AC suitable for geysers of any make/model and capacity (ISI Marked) complete all as specified and as directed.

S & F in replacement of heating element of 1500 watt for geysers including nuts, bolts, gasket etc complete all as specified and as directed.

S & F in replacement of bottom cover of 25 ltrs capacity geyser of any make / model duly painted to match with the existing surface complete all as specified and as directed.

S & F in replacement of copper tank of 25 ltrs capacity geyser ISI marked manufactured out of cold rolled pressure electro type copper sheet of appropriate thickness double tapped brazing / welded internally copper tinned and hydraulically tested including nuts, bolts, washers, etc complete all as specified and as directed.

S& F in replacement of brass chromium plated flaxible connection pipe (length not less than 30 cm and not exceeding 50cm ) with coupling nuts with washers suitable for 15 mm bore pipe complete all as specified and as directed.

S & F in replacement of PVC (heavy duty) flexible pipe connection of 15 mm bore 450 mm long with two Nos brass coupling suitable for cold water complete all as specified and as directed.

S&F in replacement of cable connection of gysers by PVC round insulated / sheathed copper cable of size 03 core 40/0076 and making necessary condition.

S&F in replacement 3 pin plug top of capacity 15 Amp AC 240 Volts 50 Hz.complete all as specified and directed .

S&F in replacement sheet metal enclosures comprising 2 pin earth industrial plug socket, MCB SP 20 Amps (C-curve-10 KA) complete all as specified and as directed.

S&F in replacement of 15mm bore brass non return valve (ISI Marked) and fixed to GI pipe fittings complete all as specified and as directed.

S&F in replacement of pressure release valve size as per existing (ISI Marked) suitable for geyser of any capacity complete all as specified and as directed.

S&F in replacement of GI tubing 15mm bore medium grade (ISI Marked) with all GI fitting and fixed complete to walls and ceiling or laid in floor for inlet and outlet water connection to existing O/H tank complete all as specified and as directed.

S&F in replacement of GI tubing 20mm bore medium grade (ISI Marked) with all GI fitting and fixed complete to walls and ceiling or laid in floor for inlet and outlet water connection to existing O/H tank complete all as specified and as directed.

S&F in replacement of Gun metal gate valve with iron wheel head, screwed both ends for iron pipe of size 15mm bore complete all as specified and as directed.

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor cable solid stranded, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1m apart including 4mm suspension wire, one twin core cable flat or circular in section of cross sectional area 6 Sqmm 2 core

All as per item No. 110.00 all as above but size 10 Sqmm 2 core.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth,for foundation,laying of cable etc.n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm thick in any type of soil complete all as specified and as directed .

Removal of excavated soil to a distance 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed .

Supply and filling dry clean sand (tibba sand) in trenches for cushioning of underground cable and punning for cushioning to cable complete all as specified and directed . Note :- Punned thicknes only shall be measured for the purpose of payment.

M&L 40 to 50mm thick rough dressed Jodhpur type stone slab cover 25 to 30 cm wide and not less than 60 cm in length, laid dry abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cable protection complete all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 Sqmm 2 core including taking out old unserviceable cable complete all as specified and as directed.

Supply and lay cable XLPE insulated screened PVC beded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core including taking out old unserviceable cable complete all as specified and as directed.

Taking down existing earthing and M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed by Engineer-in-charge. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

M/S PRASHANT BENIWAL

M/s Pankaj Enterprises

jyoti power corportion

Sachiyay maa Electricals

M/s godara infratech and power industries

M/S Tanisha Traders