PWD/SE/JJR/B.garh/Renovation work in Govt. College at Bahadurgarh in Jhajjar District.

Amount

Earth work in excavation in foundations, trenches etc. in all kinds of soil, not exceeding 2 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry in 15 cm layers with compaction, including disposal of all surplus soil as directed within a lead of 30 Mtrs. (HSR 6.6)

Earth filling under floors with surplus soil, excavated from foundation and taken only from outside the building plinth, in 15 cm layers including ramming watering and consolidating lead upto 30 metres. (HSR 6.13(a)

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth (HSR 10.28)

Providing and laying 80mm thick interlocking paver blocks of all shapes and colors in design mix cement M-35 over a bed of 30mm thick fine sand complete in all respect (HSR 10.159)

First class bricks work laid in cement sand mortar 1:6 in foundation and plinth (HSR 11.2).

(a) 11.43 cm. thick brick wall laid in cement sand mortar 1:4 in superstructure (HSR 11.48).

12 mm thick cement plaster 1:6 on walls (HSR 15.7)

15m thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR 16.1)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc. (HSR 16.2)

Painting two coats excluding priming coat with synthetic enamel paint in all shade on new wood work or metallic or plastered or concrete surface to give and even shade (HSR 16.3)

Applying Priming coat with metal primar on new steel or iron work including preparation of surface. (HSR16.9)

Painting two coats excluding priming coat with redy-mixed paint for metallic surfaces in all shades on new steel or iron work . (HSR 16.17)

Distempring with washable oil bound distemper (of approve manufacture) two coats over one priming coats one priming coat on new work (HSR 16.58).

Providing two coat of exterior acrylic paint. ( HSR 16.79) (b) 1st quality

Factory manufactured panelled door or glazed windows shutters of commercial hard wood such as Hollock & Champ only. (non coniferous timber other teak, confirming to I.S. pecificationNo. 1003, Kiln seasoned) with 100mm wide vertical styles, 150mm wide lock rail 200 mm wide bottom rail, and 100mm wide other rails, with panels of 15mm thick, tongued and grooved of commercial hard wood nd including cost of iron hinges, screw, chock/cleats, stops nails etc. complete in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position). (HSR 17.90 - Note 1 under 17.18). (a) 30mm thick

35 mm thick

Factory-manufactured wire gauze door and window shutters of commercial hard wood such as hollock, champ, chikrassy and chaplash, etc. (non coniferous timber other than teak, conforming to I.S. specification No.1003 kiln seasoned) with 100 mm wide vertical styles, 150 mm wide lock rail 200 mm wide bottom rail, and wire gauze of 140 G or 120 G designation including cost of iron hinges, screws, chock/cleats, stops nails etc. , complete fixed in position (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position) (HSR 17.92) -Note (i) under Ch. 17.18) (i) 30 mm thick

Wrought iron and mild steel (using angles, flats, square bars, tees and channels) ladders, grills, grating frames, window guards, iron doors, openable or fixed staircase or parapet or any other type of railing, gates and tree guards etc. including cost of screws and welding rods or bolts and nuts complete fixed in position (HSR 18.12)

S/F 4mm thick glass panes i/c special metal sash putty of approved make (b) Glass panes 4mm thick, exceeding 40sq dm area. (HSR 18.30.b)

Pressed steel sheet frames (chowkhats) consisting of 2mm thick steel sheet of the specified section, including iron lugs (hold fasts) iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete. b) door and window frame of size 76 mm x 38mm with 35mm wide single rebate [HSR 18.34b].

d) Door and window frame of size 127 mm x 50 mm with 40 mm wide double rebate

Preparation of sub grade, including trenching, rough dressing of spoil, final dressing of earth, to given levels and camber, watering, rolling with road roller, and compacting the bed. (HSR 24.1)

Providing and laying 150 mm thick granular sub base consisting of filter layer confirming to Table 400.1 Grading - III of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No. 401 of MoRT&H specifications. (N.S) Note: - 1.Only crushed metal material should be used. No local earth sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). 2. Material and operation manufacturing shall be approved by engineer.

P.H Providing and fixing in position best indian make (To the approval of the Engineer -in-charge) Indian type water closet suit consisting of:- (iii) 32mm dia mtr telescopic 1.25 mm thick galvanized inside and out side steel flush pipe with clips. Complete in all respects including outing and making good the walls and floors and painting of fitings etc. HSR-30.1 (a) Size 580 mm (i) White

Providing and Fixing in position best indian make large flat back or angular lippd front Urinal 610mm high consisting of- (i) flat back lipped or angular urinal basin or vitereous chinaware, (to the approval of the Engineer-in-charge) (HSR-30.25) Single Urinal White

Providing & fixing in position best Indian make lavatory suites (with full anti splash rim in vitreous chinaware and all other necessary fittings as fully described in item no. 30.41 above HSR-30.42 White (i) size 510 mm x 400 mm with one no. tap

Providing and fixing in position 15 mm I/d C.P. brass bib cocks of best quality (as required by the engineer I charge)HSR-30.75 (a) Bib cock long body

Providing and fixing in position C.P brass stop cocks (as approved by the Engineer-in-Charge)HSR-30.76 a) 15mm stop cock i) Stop cock male and female end.

Providing & Fixing PVC Rainwater Pipe 6 kg. pressure of ISI mark in cement mortar during masonry work. (a) 100 mm dia PVC pipe 6 kg. pressure (Note:- Reputed make PVC Pipe such as Supreme, Finolex, Prince will be used as approved by Engineer-in-charge. (HSR 13.89). Note:- The Agency to whom the work is alloted will have to produce original bill/voucher for all quantity in token of proof of purchase of material. Second Storey Note:- 1. in case of any difference in the Unit & nomenclature of any HSR item of Civil. P.H. work depicted in this DNIT and the given in HSR, the unit and nomenclature given in HSR shall be applicable. 2. Only reputed make material will be used (make / brand exhibited in HSR and exhibited in approved standard document) as approved by Engineer-in-charge, while executing various items / works at site.

SANTOSH

Rajesh Goel

Rajat Sehrawat

M/s R.J Buildcon