SPECIAL REPAIRS TO SUNKEN FLOOR, JALAHALLI

Amount

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for all as specified and directed.

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding/under floor Brushbond Roof guard treatment) with WPC all as specified and directed

Note for item No 3 :- WPC shall be measured and paid separately.

Providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Brushbond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties complete all as specified and directed. Solid Content : 70 % Tensile strength (ASTM D 412) : 1.10 MPa Elongation (ASTM D12): 100 % Resistance to ageing due to UV radiation: 1000 hours No change Rapid Chloride Penetration : Very low Resistance to Algae growth: Passes, Zero Rating/ Permeability (mm) : 5.0 Water vapour transmission: 6.0 g/ m² h No. of coats : 3 (minimum) Adhesive bond strength : > 0.92 N/mm2 Make : FOSROC

M&L Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work all as specified and directed

M&L for 75mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate and finishing the surfaces even and smooth without using extra cement all as specified and directed

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar all as specified and directed

M&L for Rendering 15mm thick in CM (1:4) on fair faces of brick/stone masonry surfaces mixed with water proofing compound to finished even & smooth without using extra cement all as specified and directed.

Note for item No 8 :- WPC shall be measured and paid separately all as specified and directed.

M & L for preparation of new plastered surfaces of wall and applying two coats of cement base paint complete all as specified all as specified and directed.

M&L 5 mm thick rendering on fair faces of concrete surfaces on ceiling in CM 1:3 and finishing the surfaces even and smooth without using extra cement all as specified and directed.

M&L preparation of plastered surfaces of ceiling and applying three coats of white wash on new surfaces all as specified and directed.

M&L for Rendering 10mm thick in CM (1:3) on other than fair faces of brick/stone/sunken concrete surfaces mixed with integral water proofing compound finished even & smooth without using extra cement.

Note for item No 12 :- WPC shall be measured and paid separately all as specified and directed.

M&L for Applying bitumen blown 85/25 grade, applied hot, to concrete surfaces at the rate of 1.2kg per sqm per coat all as specified and directed.

S & F APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

M&L for Plain cement concrete 1:5:10 type E2 using 40mm graded stone aggregate as in filling and mass concrete all as specified and directed.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as wearing coat for laying floor finishes, finished fair to receive tiles complete all as specified and as directed.

M&L for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor all as specified and directed.

M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces all as specified and directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces with a backing coat to receive wall tiles/skirting/dado etc all as specified and directed.

M & L for coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match all as specified and directed.

M/L reinforced cement concrete (1:2:4)typeB-1using 20mm graded stone aggregate as in slabs and finishing exposed surfaces fair & even all as specified.

M/L form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete all as specified and directed.

M&L TMT bar10mm dia & over deformed & twisted bars cut to length ,bent to shape required incl cranking , bending , hooking, for lintel and binding with MS wire not less than 0.9 mm dia or securing with clips all as specified and directed.

M&L for TMT bars 8mm dia in stirups cut to length bent to shape required including cranking, hooking ends etc and binding with MS wire not less than 0.9mm dia or securing with clips all as specified and directed.

M&L for pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE of 18 to 20 mm thick including necessary notching, chamfering the edges over cement screed bed including Cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc. but excluding washer facing dressed stone work and precast concrete articles all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 all as specified and directed.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.

M & L for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement all as specified and directed. (Note : Reinforcement shall be measured and paid separately under relevant items of this schedule).

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work finished even and smooth without using extra cement all as specified and directed.

M & L for preparation of new surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying three coat of white wash on walls all as specified and directed.

M & L for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls all as specified and directed.

M&L preparation of plastered surfaces of ceiling and applying one coat of white wash on Ceiling on old surfaces all as specified and directed.

Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters (Without taking off shutters from the frames) all as specified and directed.

Taking down Chowkhat or frame exceeding 1.5Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frames) all as specified and directed.

S&F of solid PVC door frame os size 50mm X 47mm made out of 5mm thick single side prelaminated PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with the prelaminated sheet reinforced with MS square tube all as per drawing and as directed by Engr-in-Charge.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 5mm thick moulded PVC prelaminated sheet on front face and 5mm prelamintded coloured PVC sheet on back face, complete all as specified and directed.

Resecuring or easing and adjusting wooden shutters of any description area n.exc. 1 Sqm each without taking down all as specified and directed.

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down all as specified and directed.

S & F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

Supply & Fixing 125 mm Aluminium handles, cast type, anodised all as specified and directed.

S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed all as specified and directed.

S&F Butt hinges, medium weight cold rolled mild steel and fixed 100 mm size all as specified and directed.

S & F in repair 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

Supply & Fixing in repair 125 mm Aluminium handles, cast type, anodised all as specified and directed.

S&F in repairs Butt hinges, medium weight cold rolled mild steel and fixed 100 mm size all as specified and directed.

S&F steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

S &F 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

M & L for framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc complete conforming to Fe 310-0 all as specified and directed.

Cutting holes in Stone walls in cement mortar exc one brick but not exc two brick thick wall for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 Including painting touch up as required all as specified and directed.

M&L for providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth,not otherwise described and all as specified and directed.

Supply and fix in viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed

S & F in repairs viterous china wash down water closet (Pedestral pattern) EWC white including plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' trap incl connecting flush pipe with flushing rim all as specified

S & F 32mm dia chromium plated cast copper alloy flush cock, screwed down, screwed for pipe complete all as specified

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as directed and specified

Supply and fix in repairs waste coupling of PTMT (half or full threaded) minimum weight 32mm- 45gms complete all as specified and as directed.

S & F in repairs low density polyethylene pipe of pressure rating 6 kg/sq cm for WHB/sink of 32/40 mm bore all as specified and as directed.

S & F in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement all as specified and as directed.

S&F in repair fancy type brass chromium plated shower rose with arm complete all as specified and as directed.

S & F chromium plated towel rail 20mm dia D type 60 cm long all as specified and as directed. .

S&F in repair CP soap disk fixed with screw to wall complete all as specified and as directed.

S&F in repairs stop valves cast copper screwed down high pressure fancy type screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed.

S & F in repairs stop valves fancy type chromium palted with long shank and cup (concealed type ) screwed for iron pipe of 15 mm bore all as specified and as directed.

S & F in repair bib taps, cast iron, galvanised,screwed for iron pipe and fixed,15 mm bore complete all as specified and as directed.

Supply and fix vitreous China urinals, Half stall type white (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum wt 60 gms) all as specified and as directed.

Hacking out old broken glass panes from wooden framed shutters including putty/wooden beadings and supply and fix frosted glass ordinary quality 4 mm thick, in squares n.exc. 0.5 sqm in each pane including necessary oil putty/wooden beads complete all as specified and as directed.

Taking out steel water tubing and connections 15 mm bore all as specified and as directed.

Taking out steel water tubing and connections 20 mm bore all as specified and as directed.

Taking out steel water tubing and connections 22/32mm bore all as specified and as directed.

Taking out steel water tubing and connections 40/50mm bore all as specified and as directed.

M&L for in repairs15mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors all as specified and as directed.

M&L for in repairs20mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors all as specified and as directed.

M&L for in repairs 32mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors

M&L for in repairs 40mm bore steel tubes “medium grade” galvanised with all fitting and fixed complete in walls ceiling or laid in floors all as specified and as directed.

Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm bore all as specified and as directed.

Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 20 mm bore all as specified and as directed.

Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 40/50 mm bore all as specified and as directed.

Cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick/stone walls complete all as specified and as directed.

S & F in repairs PVC connection 15 mm bore, 450 mm long complete with both ends unions all as specified and as directed.

S & F Rotational moulded Polyethylene water storage tank - 2000 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I all as specified and as directed.

S & F in repairs 40 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe all as specified and as directed.

S & F in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe all as specified and as directed.

Supply and fix in repairs 110mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix in repairs 75mm dia PVC (SWR) pipe single socket in any length with rubber ring joint fixed to wall or laid in trenches complete all as specified and as directed.

Supply and fix 110mm dia PVC bend any radius complete all as specified and as directed.

Supply and fix 75mm dia PVC bend any radius complete all as specified and as directed.

S & F PVC (SWR) bends of any radius with access door bore of pipe 75 mm all as specified and as directed.

S & F PVC (SWR) bends of any radius with access door bore of pipe 110 mm all as specified and as directed.

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm all as specified and as directed.

S & F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75mm all as specified and as directed.

S & F PVC (SWR) branch piece, single(single Y) equal or unequal with access door bore of pipe 75mm all as specified and as directed.

S & F PVC (SWR) branch piece, single (single Y) equal or unequal with access door bore of pipe 110mm all as specified and as directed.

S & F PVC (SWR) branch piece, double (double Y) equal or unequal with access door bore of pipe 110mm all as specified and as directed.

S & F PVC (SWR) reducers 110 mm all as specified and as directed.

S&F PVC (SWR) Vent cowl 110mm all as specified and as directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M & L for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates complete finished fair and even all as specified and as directed.

Raking out joints / pointing to squared rubble masonry coursed or uncoursed built in cement mortar or cement lime mortar all as specified and as directed.

Keyed pointing on squared rubble masonry coursed or uncoursed (Bangalore Pattern) in cement mortar 1:4 all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as directed.

Material and Labour for point wiring with PVC insulated unsheathed multi standard 1.5 Sqmm FRLS copper Cable drawn in and including PVC conduit/ casing capping 20/25 mm width complete with all accessories including 1.6 mm thick pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover for fixing switch,socket ,regulator etc of suitable size to be fixed on wall respectively including white washing/colour washing/distembering to match the disturbed surfaces including PVC insulated unsheathed multi standard 1.5 Sqmm FRLS copper Cable as earth continuvity connected with common earth dolly complete for One light point controlled by one switch one way 5 Amp complete all as directed

All as per item No 107 above but for one exhaust fan point controlled by one switch one 5 Amp all as specified and as directed.

S & F Switch piano flush button single pole one way 5 Amps, 240 V all as specified and as directed.

M& for ceiling rose surface backelite three terminal 240 volts complete all as specified

S & F in repairs decorative ultra slim square profille LED lighting fixture with extruded polycorbonate,environmental friendly, energy efficient ready to use pack of 20watt all as directed. Make: Havells Cat No LHEXBCP71N1W020 or equivellent in Wipro/ CG/ Bajaj/ Philips

S & F Exhaust fan 300mm sweep 230/ 240 volt, single phase 410W, 1400 RPM, make Bajaj, code 70046 including core cutting/ drilling hole on stone masonery(machine cutting) suitable for fixing exhaust fan with suitable nuts, bolts and louers and make good the surface to match with existing surface complete all as specified & directed.

S CHANDRASHEKAR (SREE BUILDERS)

LAKSHMI CONSTRUCTIONS

G K CONSTRUCTIONS

D NAGI REDDY