Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹43.0 L+₹80,322.40 (1.90%)Rejected-Finance 2 LOCKHART ROAD NEAR PCDA P OFFICE PRAYAGRAJ U P PIN 211014 | PRAYAGRAJ | UTTAR PRADESH | 211014 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹45.4 L+₹3.2 L (7.59%)Rejected-Finance D 16 OF HQ ADG P CHENNAI PLOT NO 97 SANTOSH NAGAR BALAJI NAGAR NEAR CURRENT OFFICE MEDCHAL MALKAJGIRI TELANGANA 500087 | MEDCHAL MALKAJGIRI | TELANGANA | 500087 | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹47.9 L+₹5.7 L (13.5%)Rejected-Finance 145H 2G AQAMA MODEL APARTMENT LUKERGANJ PRAYAGRAJ UTTAR PRADESH | PRAYAGRAJ | UTTAR PRADESH | 211001 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹48.0 L+₹5.8 L (13.7%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
PLENARY B/R REPAIR WORK TO OTM ACCN OF 71 Fd REGT, 4 ARTY BDE, SATA BTY, APS AND OTHER LEFT OVER UNITS UNDER AGE B/R II AT NEW CANTT PRAYAGRAJ
2024_MES_661409_1
8739/E8
Open Tender
Civil Works
Works
270 days
NEW CANTT PRAYAGRAJ
As per Tender documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹1 L
Yes
14 Oct 2024
22 Jun 2024
27 Jul 2024
22 Jun 2024
20 Jul 2024
6 Jul 2024
Amount
Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.
M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.
All as per Srl item No. 3 but except brick complete all as specified and directed. Note:- Brick obtained from demolition shall be used.
Dismantling of AC sheet corrugated/semi corrugated sheets in wall cladding or in roof covering complete all as specified and directed.
M&L 6mm thick non-asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.
Fixing only 6mm thick Asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed. NOTE: AC sheets retrieved from dismantling shall be used.
S&F 6mm thick non-asbestos fibre cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' hooks or 'J' hooks or cranked hook bolts complete all as specified and directed.
all as per item no 4 here in before but fixing only complete all as specified and directed.
M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A including dismantling of existing structural steel work complete all as specified and directed.
M & L Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing corrugated steel sheeting any gauge thickness complete all as specified and directed.
M & L Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain steel sheeting any gauge thickness complete all as specified and directed.
Dismantling, floor hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and directed.
S&F joint free non skid Ceramic coloured digital tiles, 7 to 8 mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for joint free non skid, ceramic 'coloured' digital tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L joint free non skid, ceramic “coloured” digital tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for joint free non skid, Ceramic coloured digital tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L joint free vitrified ceramic double charged coloured tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M&L for Vitrified Ceramic coloured double charged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for first or premium quality heavy duty digital pavement tiles 300mmX300mmX10mm/ 400mmX400mmX12mm thick coloured for floor/pavement etc & jointed in neat cement slurry and pointed with white cement fixed with colour pigment to match colour of tiles including 15mm thick screed bed in CM 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured tiles 450 mm x 300 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for Glazed ceramic coloured digital tiles 7 to 8mm thick area of tile exceeding 0.13 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished)for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4 all as specified.
Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
S&F Steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.
Refixing old 15mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.
Refixing old 20mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.
Refixing old 25 mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.
S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.
S&F in repair vitreous china counter top wash basin, white, oval shape of size 600x400x185mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.
S&F in repair stainless steel sink with drainage board, made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 950 mm X 510 mm with bowl size 410 mm x 410mm x 230 mm complete all as specified and directed.
S&F in repair Pillar taps, cast copper alloy, swan neck type, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.
S&F in repair CP Stop valve/angle valve 15 mm bore (weight should not be less than 0.4kg each), fancy type chromium plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.
S&F in repair rotational moulded,multilayer HDPE water storage tank (three layer white colour) of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs (three layer white colour) capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.
S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified & directed.
S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified & directed.
S&F in repair PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete all as specified & directed.
S & F in repairs wall mixers with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed
S&F Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified & directed..
S&F in repairs Ball Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified & directed.
S&F in repairs Ball Valves 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified & directed.
S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified & directed.
S&F in repair grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.
S&F in repair bib taps with wall flange 15mm bore ( weight of each bib tap should not less than 0.575kg), fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.
S&F in repair Bib tap standard of PTMT 15mm bore any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as spfd and directed.
S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore including demolition and breaking up drain waste pipe complete all as specified and directed.
S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore including demolition and breaking up drain waste pipe complete all as specified and directed.
S&F PVC (SWR) bends any radius, 75 mm with access door complete all as specified & directed.
S&F PVC (SWR) bends any radius, 110 mm with access door complete all as specified & directed.
Running welding in repair thickness of metal to be welded exceeding 6 mm but not exceeding 9mm complete all as specified & directed.
M&L for water proofing treatment to sunken floor with polymeric water proofing membrane after cleaning the surface by wire brushes,brooming,removing dust and applying treatment as under :- (a) M&L Plastering 15mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.50 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying polymeric water proofing membrane of 3mm thick with consists of a centre core 90 micron thickness molecular high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix will be protected on both sides with20 micron HMHDPE film, weight not less than 3.00 Kg/Sqm over area including overlapping as per manufacturers instruction. (e) M&L for applying a tack coat of hot blown bitumen as per IS 702-1988 applying evenly on top of polymeric water proofing membrance @ 1.20 Kg/sqm. (f) M& L for blending of course dry sand @ 0.75 KG/Sqm
S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling, waste pipe and CP spreader with connected fittings complete, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.
S&F in repair vitreous china urinal, bowl type, of size 465X355X265 mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.
S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.
S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.
S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 15mm thick rendering on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.
M&L for preparation of new plastered surfaces , applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat of chalk whiting complete all as specified and directed.
M&L for preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.
M&L for preparing of newly plastered wall surface and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of oil bound distemper using Airless spray technology including cleaning of entire surface complete all as specified and directed.
M&L for preparing old plastered decorated surfaces of wall and applying one coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.
M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed. Note: Sanding of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.
Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.
Taking down shutters of wooden or aluminium door of any description n. exc 1 sqm each complete all as specified & directed.
Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.
Refixing wooden or aluminium door shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete Note : Glass, boards , aluminium snap bead, rubber beading for aluminium door and window shutter if required new to be measured and paid separately.
Refixing wooden or aluminium door shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete. Note : Glass, boards , aluminium snap bead, rubber beading for aluminium door and window shutter if required new to be measured and paid separately.
Supply only new rubber beading of suitable size for fixing the glass/board in aluminium door/ window shutter complete all as specified and as directed.
Supply only aluminium snap bead of suitable size for aluminium door and window shutter complete all as specified and as directed.
Supply only factory Made 9mm thick 100% Solid WPC ( Wood polymer Composite ) Sheet of required size (laminated both side) comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm manufactured by "RAJSHRI" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified and as directed. Note:- Manufacturer's test certificate of material will be provided by the contractor.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibre (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
M&L Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads 2nd Class hardwood sectional area exceeding 3sq cm and not exc 6 sq cm including taking down old unserviceable fillets complete all as specified and as directed
M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast, coping erection of posts etc complete all as specified & directed.
M&L mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.
S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube other hardware should be fixed with 19*6mm size steel screws etc. complete all as specified and as directed.
S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.
S&F Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete all as specified and as directed.
S & F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and as directed.
S & F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete all as specified and as directed.
S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.
S&F solid prelam moulded PVC double door frame of size 50mm x 95mm made single side prelam PVC sheet used instead of plain colour PVC sheet complete all as specified and as directed.
S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed
S&F 12 mm thick milky white frosted toughened glass with etching for making good any surface / wall door etc including necessary fittings, channel rail etc quality as approved, fixed with jointing material PVC flap at bottom to make fly proof including brass CP 450 mm long handles suitable magnet to hold shutters complete all as specified & directed.
S&F in repair aluminium anodised grill of size 75 mm x 75 mm x 4 mm thick for window including jointing cleat, aluminium anodised strip beading screw complete all as specified & directed.
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.
M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces , over 10 cm in width or girth not other wise described complete.
S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.
S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.
S&F in repair 18/19mm thick prelaminated medium density fibre board, commercial type, interior grade adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails including 4mm thick teak wood lipping duly French polished around complete all as specified and directed.
S&F in repair 18/19mm thick prelaminated particle board, interior grade,(one side decorative and other side balancing white), flat pressed, single or three layer type with BWR adhesive fixed to Timber frame work etc., fixed with screw complete all as specified and directed.
S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.
S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified & directed.
M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified & directed.
S&F for 6.30mm thick sheet glass ordinary quality and glazing with rubber beading/gasket in square exceeding 0.5 sqm in each pane complete all as specified & directed.
S&F in repair Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and CP brass brackets (wall to wall or flush to wall) for securing to curtain rod complete.
S&F in repair floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.
S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.
S&F in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed Make Godrej/Link
S&F in repair 100mm mortice lock four levers (vertical type), of brass body complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed.
S&F 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete all as specified and directed.
S&F MS butt hinges cold rolled medium weight of size 100 mm etc complete all as specified & directed.
S&F MS 150 mm pressed handles oval type stove enameled black complete all as specified & directed.
S&F for MS barrel tower bolts of extruded section 200 mm long complete all as specified & directed.
S&F in repair 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple complete all as specified & directed.
S&F in repair 300mm long aluminium alloy anodised sliding door bolts , with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy complete all as specified & directed. .
S&F in repair MS butt hinges cold rolled medium weight of size 100mm etc complete all as specified & directed.
S&F in repair Aluminium alloy handles 150 mm long fabricated type complete all as specified & directed.
S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.
M&L for Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required all as specified & directed.
S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed
S&F 100mm long aluminium alloy handle cast type anodized. complete all as specified and directed
Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.
S&F 4mm thick E-boards tiles false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fasteners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texture and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.
S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.
S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.
M&L for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed
M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in flooring complete all as specified and directed.
Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness in floors, aprons etc complete all as specified and directed. .
M&L for 80mm thick M-40 grade factory made rubber moulded vibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.
M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement slurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor complete all as specified & directed.
S & F in repair waste coupling of CP (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms of 32mm dia for WHB complete all as specified and directed.
S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
M&L for taking down hood cover of rolling shutters, cleaning thoroughly, greasing the moving parts like ball bearing, Helical springs, guide channels ets of the existing rolling shutters including making straight guide channel and replacing the damaged parts if required (measure and Paid separately as supply only) like spring, ball bearing etc to make the rolling shutter fully functional complete all as specified and directed.
Supply only new helical steel spring 45 cm long of existing dia and gauge(not less than 4 Kg each) complete all as specified and directed.
S&F in repair steel rolling shutters without ball bearing including top cover anchoring rod, hasp and staple and one shop coat of primer, erected in position push pull or manual type thickness of laths 1.00 mm including taking down old unserviceable rolling shutters complete all as specified and directed.
All as per Srl item No. 151 but gear operated type with bevel gear box and crank handle complete all as specified and directed.
S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
S&F Ball bearing for rolling shutters complete all as specified and directed. (Make-NBC/SKF/TATA)
S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.
S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete
S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.
S&F in repair two way angle valves /tap with flange 15mm bore (weight should not be less than 0.575kg each), fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed.
S & F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete.
S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.
S&F in repair Brass chromium plated shower rose 65 to 90 mm size , shower Arm with swivel joints complete all as specified and directed.
S & F in repair Towel ring chromium plated complete all as specified and directed.
Cleaning and removing all scale and dirt etc from water storage tank of 250 to 500 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning all and specified and directed.
Cleaning and removing all scale and dirt etc from water storage tank of 500 to 1000 ltrs capacity and from mouth of circulating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY pattern and refixing the cover after cleaning all and specified and directed.
M&L preparation of existing new or old plaster surfaces including removal of existing treatment and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydraulic water proofing of make Asian on plaster surfaces complete all as specified by the manufacturer
Schedule of Credit (MINUS) Rs. 93390.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum
Jahanvi enterprises (BID ID -3060535)
M/s Radhika Enterprises (BID ID -3060649)
YASH ENTERPRISES (BID ID -3060620)
Channa Brothers and Co. (BID ID -3069034)
Technological Associates (BID ID -3052925)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .