Up-gradation Procurement of Heritage Assets to Providing MS Grill on dwarf wall around the Monument of Tomb of Mohd. Khan Bangash Nawab, Farrukhabad

Amount

Execution of work

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil.

Demolishing Brickwork manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 m of lead as per direction of E in C In cement mortar.

Provision for erection and dismantling of scaffolding with bamboo, balli, challi, coir, string rope etc for execution of the work including supply of the material and labour etc complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars .

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. As per attached drawing.Calculation for 1 panel set between two pillars : size of 2.0m (H) x 1.5m(V)x2 =6.00 sqm Vertical MS Angles 50mmx50mmx6mm, 2x 2nosx1.70m = 6.80 m @ 4.50 kg/m = 30.60 kg Horizontal MS Angles 50mmx50mmx6mm, 2x 2 nosx 2.00m = 8.00 m @ 4.50kg/m= 36.00 kg Horizontal MS Angle holdfasts 50mmx50mmx6mm, 2x 2nos x 0.15m = 0.60 m @ 4.5kg/m = 2.70 kg MS square 16 mm bars at c/c distance 15 cm , 2x 12 Nos x 1.50m = 36.00 m @2.01 kg/m = 72.36 kg Horizontal MS flats 40mm x 5 mm,2 x 2 nos x 2.00m = 8.00 m @ 1.57kg/m = 12.56 kg Design MS flats 40mm x 5 mm, 2x 13 nos x 0.51 m= 13.26m @1.57kg/m = 20.82 kg Nut Bolt assembly, 3 nos @ 100gm each = 0.3 kg Total weight of 1 panel of 6.00 sqm = 175.34 kg; Hence 1 sqm panel weight= 175.34/6 = 29.22 kg MS grill panel 56 nos x 2 x 1.5 x 2 = 336 sqm @29.22 kg = 9817.92 kg.

Raking of joints in lime or cement mortar and preparing the surface for repointing or re plastering, including disposal of rubbish to the dumping ground all complete as per the Engineer in charge.

Provision for 20 - 30 mm thick ( 25 mm nominal thickness)simple lime plaster work with mortar of ratio 1:1:1 (Lime, surkhi and coarse sand ) with mix of gur sheera, dry gum , belgiri, etc matching with the monument. Plaster work to be executed in two coats as required including all the labour and T&P required proper completion of work at the site.

Finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturer’s specifications. Painting steel work with Deluxe Multi surface paint to give an even shade two or more coat applied @ 0.90 ltr / 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.

Provision for Purchase and installation at site of readymade Dustbins of Red Sand Stone of Cylindrical shape in single block having top molding and depression as per design on extra surface fully open top outer top dia 580mm and height 750mm of required shape & design.

Provision for supply and fixing of Red/buff sand stone bench ( Bansi Pahar , Rajasthan ) including all labour , material and T&P required for proper completion of work.

Provision for laying fine sand for preparing the surface for brick on edge flooring at site.

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand).

M/S Raj Construction (BID ID -3256244)

DBS Engineers Pvt. Ltd. (BID ID -3255595)