Proposal of VOC Park And Ground Side Road Area for the Health And Hygienic Food Street in Ward no.83 Central Zone Coimbatore corporation.

Amount

Dismatling Rcc slabs as per direction of dept officers etc complete

Dismatling Plain Cement Concrete as per direction of dept officers etc complete

Dismatling Brick in cement mortar walls

Sand and Silt Under Water (SS20B) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Slush and silt under water upto 0.75m depth requiring the aid of basket and vessels (SS20B)

Desilting the storm water drain - Sand and Silt Under Water (SS20B) Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Slush and silt under water upto 0.75m depth requiring the aid of basket and vessels

Conveyance of Surplus earth from work site to City outer with average lead of 15 km

Cement concrete 1:4:8 (one cement, four sand and eight aggregater) using 40mm BSS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS

Cement concrete 1:2:4 (one cement, two sand and four aggregate) using 20mm BSS HBG metal including cost of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification

Plastering in Cement Mortar 1:5 mix 12mm thick

Supply and Fiiling with Well gravel including cost and conveyance of alll materials and all labour charges

Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 83 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Roofing with Galvanished Iron .Sheet with all accessories including cost and conveyance and all labour charges etc.,

Supplying , fabricating and placing in position steel reinforcement using mild steel/ ribbed for steel roads for all RCC work including cost of steel binding wire all labour charges for cutting fabrication and placing of rods and other incidential charge etc.,

Supply of RCC precast slab 75mm thick in C.C. 1:2:4 mix using 20m broken jelly including water curing, moulding charges etc., complete.

Daddoing the walls with first quality approved white glazed tiles of size 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) , of approved make (Jhonson / Asian / Somany / Nitco) in all colours , shades of size 300 x 450 mm as approved in skirting , risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement with pigment of matching shade complete - size 300x450 mm

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Water Supply and Sanitary Arrange Ments

Supplying and fixing in position best approved of BIS quality PVC Waste water pipes having a pressure kg. / sq.cm including cost of special clamps,brass screws nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusrve of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamps at the centre of the pipe line in addition to those for more than 6.0 meter pipe length, etc., complite with standared specification

110mm dia pipe

90mm dia pipe

Supply and delivery and fixing of HDPE tank as per lS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the Gl pipes and specials for pipe connection works including cutting. threadina and fixino charges etc..

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

25mm gun metal gate valve

90mm dia pipe

Supplying and fixing in position 15mm dia brass CP screw down tap I Pillat tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary- Oaps should be got approved by the Executive Engineer before use on the works)

Pillar tap

Supplying, laying and jointing PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges up to 4 meter height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

32mm dia

Supplying PVC Specials (with working pressure '10 kg. / sq.cm.) in water supply anangements (both in internal and external water suoolv arranoements

Coupler

25mm dia

32mm dia

Elbow

25mm dia

32mm dia

25mm dia

32mm dia

25mm dia

32mm dia

End Cap

25mm dia

32mm dia

Reducer

20mm x 15mm

25mm x 20mm

32mm x 25mm

Reducer Tee

20mm x 15mm

25mm x 20mm

32mm x 25mm

Reducer Elbow

20mm x 15mm

25mm x 20mm

32mm x 25mm

Jet Nipple

25mm dia

32mm dia

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

PVC Elbow

110mm dia

75mm dia

Pvc Elbow with Door

110mm dia

75mm dia

PVC Tee

110mm dia

75mm dia

PVC Tee withSingle Door

110mm dia

75mm dia

PVC "Y" with single Door

110mm dia

90mm dia pipe

Supplying and fixing of European Water Closet (Colour) with 'P' or 'S' Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings

Supplying and fixing in posltion C.P. Towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plug and C.P. Screws etc. complete complying with standard specification.

Supplying and fixing in position C.P. Soap tray of size 150 x 150mm including cost of teak wood plug and C-P. screws. etc. complete complying with standard specification.

Supplying and fixing in position lndian make bewelled edge miror of size 600 x 450mm quality including cost of Rawal plugs, brass screws. etc.

Earthling as per lSl Specification with an ea(h electrode ol 2.1mt class 'B' Gl pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoal, common salt, G.l-reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (sD 233)

Supplying and run off 8 SWG copper wire on walls or below ground level with necessary'U' nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental otflcers.(SD 75)

Supplying and Fixing of 3 Phase DB with MCB 12 way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neutral links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / lsolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x 4 ways in each segment) and separate provisions for MCB / lsolator (totally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in all respects as directed by the depa(mental offi cers

Supply and run otf 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lSl mark confirming to 15:694/1990 with continuous earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (denved from SD 55)

Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with lSl mark confirming to IS:694/1990 with continious earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to 15:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall ior mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54)

Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500v)32A neutral link and earth link (1" x 1/8" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supportingT.W.reepers of '1" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection wlh 7120 Pvcinsulated copper wire from EBmeter to fuse unit. SO 127)

Supply and run ol 4 core 16 Sq.mm PVC Armoured cable of 1100 V grade with lsl mark.(Part E r) V

Supply and run of 4 core '10 Sq.mm PVC Armoured cable of 1100 V grade with lsl mark.(Part E c) V

Wiring with 2 x 1.5 sqmm (22 lo.3 ) PVC insulated single core unsheathed copper conductor cable 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. swtch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic requlator). SD 23

Wiring with 2 x 1.5 sqmm (22 10.3 \ PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories rnflush \Mth all with 150 x 100 x 1'13 mm TW swtch box wth 3mm hylum sheet cover for 5A 3 pin non nteT locking CS plug with continucus eartn wrre connecticn of 14 SWG TC wire anc n'akin j Eood of the concealed portion with suitable ccloJr'3r ccncealed PVC plug point. SD 38

18 W LED Tubelight for T8 Fitting Single side (15- e)

Supply and Fixing 12" (30cm dia ) light duty Exhaust fan including coast at matterials labour,lead,lift,etc complette

Supplying and fixing of position of Indian make colour glazed earthwere wash basin 550mm x 400mm with all accessories such as cost Iron brackets, 32mm dia C.P. Waste coupling, Rubber plug and chain, 32mm dia 'B' class, G.I. Waste pipe, 15mm dia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia Brass Nipples, 15mm C.P. pillar tap etc.,

Supplying and Erection Tensile Membrances Structure post 300mmx6mm thick,Support Post 150mm x 3.60mm thick,Truss 230mm x4mm thick ,Bottom Stay of 150mm x 4mm thick,Purlin of 150mm x 4mm tick, Tie pipe 88mmx3.6mm thick, Base plate 2'9" x 2'6"x16mm thick, Bed Bolt 23mm dia Tensile Fabric of 1150GSM etc complete as per the direction of the Departmental officers.

Supply and Installation of stall using Ms Angles,Sheets,Grills,Square Pipes

Pre-Painted Galvanized Iron windows (Air Tight Model) with Acrylic Sheet & Grill: Providing and fixing Ajanta Cave Model window fabricated from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per IS 513 ‘D’ quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.6mm. Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns. Dimensions of sections: Sections for shutter should be of 46 x 46mm and external frame should be of 46 x 52mm. Section for glass beading should be of 18 x 25mm and centre mullion should be of 46 x 70mm. Fixing details: The frame and shutter sections should be cut to length and mitre joined with corner bracket made of CRCA electro plated. Mullion section should be joined with frame / mullion using nylon mullion cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter, between frame and glazed shutter and both sides of fixed glass. Accessories: Handle made of high grade Aluminium Powder coated and with nylon receiver. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM). Corner brackets made of CRCA with zinc phosphating. Mullion caps made of glass filled nylon.

Supply of border Plants including labour charges as per direction of departmental officers.

Supply and Fixing park Benches

Supply and Fixing Tank Stand

Painting new iron work for doors, windows, grills, weld mesh sceens etc., two coats over one coat of primer

LEDOLUX Neon LED Strip Light 16.4ft/5m 12V DC 600 SMD2835 LEDs Waterproof Flexible LED NEON Light for Indoors Outdoors Decor [ Purple | No Power Adapter]