Construction of Balance Work of 04 ACR with Retaining wall and boundary wall at Model Govt. Higher Secondary School Batote Zone Batote District Ramban

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 1 0 sqm on plan, depth upto 1.5mtr. including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled and neatly dressed in: All kinds (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed (including all carriages lead and lift if any)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) Crushed Foundation With 20 % boulder (including all carriages lead and lift if any)

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand) (including all carriages lead and lift if any)

Dry random rubble masonry with hard stone in foundation and plinth: Using nallah stone with bond stone (including all carriages lead and lift if any)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutmen"ts, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) (including all carriages lead and lift if any)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand) (including all carriages lead and lift if any)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means) (including all carriages lead and lift if any)

Providing and laying damp-proof course 5Crnm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size (including all carriages lead and lift if any)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. ( to be paid as per design) (including all carriages lead and lift if any) (including all carriages lead and lift if any)

centering and shuttering including strutting~ propping etc and removal of form work for.FoundatiOns footings. bases of columns (including all carriages lead and lift if any)

Centering and shuttermg including strutting, propping etc. and removal of form for· Suspended floors, roofs, landings, balconies and access platform. (including all carriages lead and lift if any)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand) out side b/ wall (including all carriages lead and lift if any)

6mm cement plaster 1 : 3 (1 cement: 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams (including all carriages lead and lift if any)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coaton unexposed surface etc. complete: 2nd class teak wood 50x12mm (including all carriages lead and lift if any)

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws. Second class deodar wood. (including all carriages lead and lift if any)

Providing and fixing glazed shutters for doors, window and clerestory windows 35mm thick using 1 0kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt· hinf!eS bright finished of required size with necessary screws. Second class deodar wood (including all carriages lead and lift if any)

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all Zomplete.Fixed to openings wooden frames with rawl plugs screws etc. (including all carriages lead and lift if any)

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing & staircase railir>g and similar work including applying a priming coat of approved steel primer. G. I. pipes 40mm nominal bore (class B) (including all carriages lead and lift if any)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc.Size of tile 60x60cm (including all carriages lead and lift if any)

Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6 mm thick (including all carriages lead and lift if any)

Providing and laying ceiling joist Badloo/ fir wood (including all carriages lead and lift if any)

Supplying and filling in plinth with fine sand under floors including, watering, ramming consolidating and dressing complete. (including all carriages lead and lift if any)

Finishing walls with water proofing cement paint of required shade New work (two or more coats (including all carriages lead and lift if any)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer (including all carriages lead and lift if any)

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (including all carriages lead and lift if any)

Applying priming coat: with ready mixed pink or gray Chromate primer of approved brand and manufacture on steel galvanised iron/wood works (including all carriages lead and lift if any)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work (including all carriages lead and lift if any)

Making plinth protection 50 mm thick of cement concrete 1:3:6( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mmnominal size) over 75mm bed of dry brick ballast 40mm nominalsize well rammed and consolidated and grouted with fine sand including finishing the top smooth. Crushed. (including all carriages lead and lift if any)

Providing and fixing aluminium sliding door bolt lSI markedanodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 250x16 mm (including all carriages lead and lift if any)

Providing and fixing aluminium tower bolt lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 150x10 mm (including all carriages lead and lift if any)

Providing and fixing aluminium tower bolt lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 200x10 mm (including all carriages lead and lift if any)

Providing and fixing aluminium hanging floor door stopper lSI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper (including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm (including all carriages lead and lift if any)

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm (including all carriages lead and lift if any)

Electric wiring with 1.5 sqm copper cable including 20 mm dia, 2mm thick PVC pipe, 5 Amp switch, sunken box and connection to the main pole complete as directed by engineer in charge (including all carriages lead and lift if any)

M/s Mohd Firdoos Rather

Nasir Latief Butt

M/s Mohd Azam Wani and Sons